FatTwin - SuperMicro High Density Server

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

 

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

 

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3008
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)
Hot-swap:
6x Hot-swap 2.5" SATA3 or 2x Hot-swap 2.5" SATA3 + 4x NVMe U.2
M.2:
M.2 Support

 

(per node)
PCI-Express:
1x PCI-E 3.0 x16 (Low-profile)
1x PCI-E 3.0 x16 (SIOM)

 

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per node)
SAS:
6x SAS3 (12Gbps) ports
NVMe:
4x NVMe U.2 option
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

(per node)
3x 4cm 20k RPM middle fans

 

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), Dual UPI up to 10.4GT/s
Support CPU TDP 70-165W with IVR
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

 

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

 

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

 

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108
HW RAID
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)
Hot-swap:
6x Hot-swap 2.5" SATA3 or 2x Hot-swap 2.5" SATA3 + 4x NVMe U.2
M.2:
M.2 Support

 

(per node)
PCI-Express:
1x PCI-E 3.0 x16 (Low-profile)
1x PCI-E 3.0 x16 (SIOM)

 

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

 

(per node)
SAS:
6x SAS3 (12Gbps) ports
NVMe:
4x NVMe U.2 option
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

(per node)
3x 4cm 20k RPM middle fans

 

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)
Hot-swap:
6x Hot-swap 2.5" SATA3 drive bays
M.2:
M.2 Support
Backplane:
1x SAS/SATA backplane

(per node)
1x PCI-E 3.0 x16 (Low-profile)
1x PCI-E 3.0 x16 (SIOM)

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

(per node)
SATA:
14x SATA3 (6Gbps) ports
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

(per node)
3x 4cm 20k RPM middle fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), Dual UPI up to 10.4GT/s
Support CPU TDP 70-165W with IVR
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)

Hot-swap:
6x Hot-swap 2.5" SATA3 or 2x Hot-swap 2.5" SATA3 + 4x NVMe U.2
M.2:
M.2 Support

(per node)
PCI-Express:
1x PCI-E 3.0 x16 (Low-profile)
1x PCI-E 3.0 x16 (SIOM)

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per node)
SATA:
14x SATA3 (6Gbps) ports
NVMe:
4x NVMe U.2 option
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

(per node)
3x 4cm 20k RPM middle fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

 

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3008
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)
Hot-swap:
8 Hot-swap 3.5" SAS3/SATA3 or 6 Hot-swap 3.5" SAS3/SATA3 + 2 optional NVMe U.2
M.2:
M.2 Support

(76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per node)
SAS:
8x SAS3 (12Gbps) ports
NVMe:
2x NVMe U.2 option
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

 

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108
HW RAID
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)
Hot-swap:
8 Hot-swap 3.5" SAS3/SATA3 or 6 Hot-swap 3.5" SAS3/SATA3 + 2 optional NVMe U.2
M.2:
M.2 Support

1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

SAS:
8x SAS3 (12Gbps) ports
NVMe:
2x NVMe U.2 optional
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

(per node)
Fans:
2x 8cm 14 RPM middle fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

 

 

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

(per node)
1x PCI-E 3.0 x16 (Low-profile)
1x PCI-E 3.0 x16 (SIOM)

1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
 UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per node)
SATA:
14x SATA3 (6Gbps) ports
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

 (per node)
2x 8cm 14k RPM middle fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps)
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)
Hot-swap:
8 Hot-swap 3.5" SATA3 or 6 Hot-swap 3.5" SATA3 + 2 NVMe U.2
M.2:
M.2 Support

1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per node)
SATA:
14x SATA3 (6Gbps) ports
NVMe:
2x NVMe U.2 option
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

(per node)
Fans:
2x 8cm 14 RPM middle fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

(per Node)

4U Rackmount Chassis

Height:
6.96" (177mm)
Width:
17.63" (448mm)
Depth:
29" (737mm)

BIOS Type:
AMI 32MB SPI FLASH ROM

(per Node)
Drive Bays Configuration

Default:

Total 6 bay(s)
6 front hot-swap 2.5" NVMe*/SAS*/SATA drive bay(s)
(NVMe/SAS support may require additional storage controller and/or cables, please see the optional parts list for details)

M.2:
2 M.2 PCIe 3.0 x2 NVMe/SATA slot(s) (M-key 2280/22110)

(per Node)
PCI-Express (PCIe):
1 PCIe 5.0 x16 LP slot(s)
2 AIOM slot(s)

(per Node)
SATA:
10 SATA (6Gbps) port(s)
LAN:
1 RJ45 Dedicated IPMI LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)

Fans:
3x 4cm Fan(s)
4x 4cm Fan(s)

Environmental Spec.:
Operating Temperature:
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
   5% to 95% (8)
Non-operating Relative Humidity:
   90% to 5% (95)

4U Rackmount Chassis

Height:
6.96" (177mm)
Width:
17.63" (448mm)
Depth:
29" (737mm)

BIOS Type:
AMI 32MB SPI FLASH ROM

(per Node)
PCI-Express (PCIe):
1 PCIe 5.0 x16 LP slot(s)
1 AIOM slot(s)

Fans:
2x 8cm Fan(s)

Operating Temperature:
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
   5% to 95% (8)
Non-operating Relative Humidity:
   90% to 5% (95)