4U - SuperMicro Dual Processor Server

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
 

Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Height:
7.0" (178mm)
 

Width:
17.2" (437mm)
 

Depth:
29" (737mm)

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C622 chipset
 

SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
 

Network Controllers:
Dual Port 10GbE from C622
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
ASPEED AST2500 BMC

Hot-swap:
Up to 24x 2.5" SAS/SATA drive bays
8x 2.5" SAS/SATA supported natively
2x 2.5" NVMe supported natively
 

M.2:
1 NVMe based M.2 SSD
Form Factors: 2260, 2280, 22110

8 PCI-E 3.0 x16 (double-width) slots
2 PCI-E 3.0 x8 slots
1 PCI-E 2.0 x4 slot

2000W Redundant Power Supplies with PMBus
 

Total Output Power:
1000W/1800W/1980W/2000W
 

Dimension (W x H x L):
73.5 x 40 x 265 mm
 

Input:
100-120Vac / 12.5-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
 

+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
 

12Vsb:
Max: 2.1A / Min: 0A
 

Output Type:
25 Pairs Gold Finger Connector
 

Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

SATA:
10 SATA3 (6Gbps) ports
 

LAN:
2 RJ45 10GBase-T LAN ports
1 RJ45 Dedicated IPMI LAN port
 

USB:
4 USB 3.0 ports (rear)
 

Video:
1 VGA Connector
 

COM Port:
1 COM port (rear)

Fans:
8 Hot-swap 92mm cooling fans
 

Shrouds:
1 Air Shroud (MCP-310-41808-0B)

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Height:
7.0" (178mm)
Width:
17.2" (437mm)
Depth:
29" (737mm)

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C622 chipset
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers:
Dual Port 10GbE from C622
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
Up to 24x 2.5" SAS/SATA drive bays
8x 2.5" SAS/SATA supported natively
2x 2.5" NVMe supported natively
M.2:
1 NVMe based M.2 SSD
Form Factors: 2260, 2280, 22110

11 PCI-E 3.0 x16 (FH, FL) slots
1 PCI-E 3.0 x8 (FH, FL, in x16) slot

2000W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1800W/1980W/2000W
Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-120Vac / 12.5-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

SATA:
10 SATA3 (6Gbps) ports
LAN:
2 RJ45 10GBase-T LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:
4 USB 3.0 ports (rear)
Video:
1 VGA Connector
COM Port:
1 COM port (rear)

Fans:
8 Hot-swap 92mm cooling fans
Shrouds:
1 Air Shroud (MCP-310-41808-0B)

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
GPU Support:
NVIDIA Tesla V100 SXM2 GPU

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Height:
7.0" (178mm)
Width:
17.6" (447mm)
Depth:
31.7" (805mm)

BIOS Type:
AMI 32Mb SPI Flash ROM
BIOS Features:
Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
SSM, SPM, SUM
SuperDoctor® 5
Watchdog

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers:
Dual Port 10GBase-T from Intel X540 Ethernet Controller
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
16 Hot-swap 2.5" SAS/SATA drive bays
Optional 8x 2.5" NVMe supported
M.2:
2 NVMe based M.2 SSD
Form Factors: 2260, 2280, 22110

4 PCI-E 3.0 x16 (LP, GPU tray for GPUDirect RDMA) slots
2 PCI-E 3.0 x16 (LP, CPU tray) slots or up to 8x 2.5" NVMe Storage Devices

2200W Redundant Titanium Level Power Supplies with PMBus
Total Output Power:
1200W/1800W/1980W/2090W/2200W
(UL/cUL only)
Dimension (W x H x L):
106.5 x 82.4 x 203.5 mm
Input:
1200W: 100-127 Vac / 14-11 A / 50-60 Hz
1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
1980W: 220-230 Vac / 10-9.5 A / 50-60 Hz
2090W: 230-240 Vac / 10-9.8 A / 50-60 Hz
2200W: 220-240 Vac / 12-11 A / 50-60 Hz (UL/cUL only)
2090W: 180-220 Vac / 14-11 A / 50-60 Hz (UL/cUL only)
2090W: 230-240 Vdc / 10-9.8 A (CCC only)
+12V:
Max: 100A / Min: 0A (1200W)
Max: 150A / Min: 0A (1800W)
Max: 165A / Min: 0A (1980W)
Max: 174.17A / Min: 0A (2090W)
Max: 183.3A / Min: 0A (2200W)
Max: 174.17A / Min: 0A (2090W)
12Vsb:
Max: 2A / Min: 0A
Output Type:
Gold Finger (connector on M/P)
Certification:
Titanium Level

SATA:
8 SATA3 (6Gbps) ports
LAN:
2 RJ45 10GBase-T LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:
2 USB 3.0 ports (front)
Video:
1 VGA Connector
COM Port:
1 COM port (header)

8x 92mm Cooling Fans
4x 80mm Cooling Fans

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

3U Rackmount Chassis

Width:
17.2" (437mm)
Height:
5.2" (132mm)
Depth:
25.5" (648mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

BIOS Type:
256Mb AMI UEFI

Chipset:
Intel® C624 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID
RAID 0, 1, 5, 6, 10, 50, 60
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers:
Intel® X557 10GBase-T Ethernet Controller
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
16x Hot-swap 3.5" SAS3/SATA3 drive bays
Optional:
2x Optional Onboard NVMe M.2

Backplane:
SAS3 12Gbps single expander backplane, w/ 16x SAS3 3.5" drive slots and 2x mini-SAS HD connectors for JBOD expansion

3x PCI-E 3.0 x16 slot
4x PCI-E 3.0 x8 slots
Slot 2 & 3 occupied by controller and JBOD Expansion Port

1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
 UL/cUL/CB/BSMI/CE/CCC
Titanium Level

LAN:
2x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
2x USB 2.0 ports (rear)
1x Type A
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1 Header

3x Hot-swap 8cm redundant PWM cooling fans
2x Hot-swap 8cm rear exhaust PWM fans
Redundant cooling

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
26.5" (673mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

BIOS Type:
256Mb AMI UEFI

Chipset:
Intel® C624 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID
RAID 0, 1, 5, 6, 10, 50, 60
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers:
Intel® X557 10GBase-T Ethernet Controller
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
24x Hot-swap 3.5" SAS3/SATA3 drive bays
Optional:
2x Optional Onboard NVMe M.2
Backplane:
SAS3/SATA3 single expander per backplane

3x PCI-E 3.0 x16 slot
4x PCI-E 3.0 x8 slots
Slot 2 & 3 occupied by controller and JBOD Expansion Port

1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
 UL/cUL/CB/BSMI/CE/CCC
Titanium Level

LAN:
2x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
2x USB 2.0 ports (rear)
1x Type A
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1 Header

3x Hot-swap 8cm redundant PWM cooling fans
2x Hot-swap 8cm rear exhaust PWM fans
Redundant cooling

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
26.5" (673mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

BIOS Type:
256Mb AMI UEFI

 

Chipset:
Intel® C624 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3008 AOC
Broadcom 3008 controller
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers:
Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
24x Hot-swap 3.5" SAS3/SATA3 drive bays
Optional:
2x Optional Onboard NVMe M.2
Backplane:
SAS3/SATA3 single expander per backplane

3x PCI-E 3.0 x16 slot
4x PCI-E 3.0 x8 slots
Slot 2 & 3 occupied by controller and JBOD Expansion Port

(76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

LAN:
2x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB:
4x USB 3.0 ports (rear)
1x Type A
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1 Header

3x Hot-swap 8cm redundant PWM cooling fans
2x Hot-swap 8cm rear exhaust PWM fans
Redundant cooling

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
27.5" (699mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

BIOS Type:
256Mb AMI UEFI

Chipset:
Intel® C624 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID
RAID 0, 1, 5, 6, 10, 50, 60
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers:
Intel® X557 10GBase-T Ethernet Controller
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
36x Hot-swap 3.5" SAS3/SATA3 drive bays
Optional:
2x Optional Onboard NVMe M.2
Backplane:
SAS3/SATA3 single expander per backplane

3x PCI-E 3.0 x16 slot
4x PCI-E 3.0 x8 slots
Slot 2 & 3 occupied by controller and JBOD Expansion Port

1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
 UL/cUL/CB/BSMI/CE/CCC
Titanium Level

LAN:
2x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
2x USB 2.0 ports (rear)
1x Type A
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1 Header

3x Hot-swap 8cm redundant PWM cooling fans
2x Hot-swap 8cm rear exhaust PWM fans
Redundant cooling

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
27.5" (699mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

BIOS Type:
256Mb AMI UEFI

 

Chipset:
Intel® C624 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3008 AOC
Broadcom 3008 controller
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers:
Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
36x Hot-swap 3.5" SAS3/SATA3 drive bays
Optional:
2x Optional Onboard NVMe M.2
Backplane:
SAS3/SATA3 single expander per backplane

3x PCI-E 3.0 x16 slot
4x PCI-E 3.0 x8 slots
Slot 2 & 3 occupied by controller and JBOD Expansion Port

(76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1200W
Dimension (W x H x L):
76 x 40 x 336 mm
Input:
100-127Vac / 15-12A / 50-60Hz
200-240Vac / 8.5-7A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
+5Vsb:
Max: 4A / Min: 0A
Output Type:
19 Pairs Gold Finger Connector
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

LAN:
2x RJ45 10GBase-T LAN ports
1x RJ45 Dedicated IPMI LAN port
USB:
4x USB 3.0 ports (rear)
1x Type A
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header

3x Hot-swap 8cm redundant PWM cooling fans
2x Hot-swap 8cm rear exhaust PWM fans
Redundant cooling

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
26" (660mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108; HW RAID
RAID 0, 1, 5, 6, 10, 50, 60
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
45x Hot-swap 3.5" SAS3/SATA3 drive bays
2x Rear Hot-swap 2.5" SATA drive bays
Optional:
6x NVMe bays (optional)

PCI-Express:
2x PCI-E 3.0 x16 slots
1x PCI-E 3.0 x8 slot
1x SIOM card support
(must bundle with network card)

1600W 1U Redundant Power Supplies with PMBus
Total Output Power:
1000W/1600W
Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-127Vac / 12.9A Max / 50-60Hz
200-240Vac / 9.5A Max / 50-60Hz
+12V:
Max: 82A / Min: 0.1A (100-127Vac)
Max: 132A / Min: 0.1A (200-240Vac)
12V SB:
Max: 2A / Min: 0.2A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Platinum Level Certified94%+  Platinum Level

Serial ATA:
8x SATA3 (6Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
1x Type A
VGA:
1x VGA D-Sub connector port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header

5x Hot-swap 8cm rear exhaust PWM fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
26" (660mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108; HW RAID
RAID 0, 1, 5, 6, 10, 50, 60
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
45x Hot-swap 3.5" SAS3/SATA3 drive bays
2x Rear Hot-swap 2.5" SATA drive bays
Optional:
6x NVMe bays (optional)

PCI-Express:
2x PCI-E 3.0 x16 slots
1x PCI-E 3.0 x8 slot
1x SIOM card support
(must bundle with network card)

1600W 1U Redundant Power Supplies with PMBus
Total Output Power:
1000W/1600W
Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-127Vac / 12.9A Max / 50-60Hz
200-240Vac / 9.5A Max / 50-60Hz
+12V:
Max: 82A / Min: 0.1A (100-127Vac)
Max: 132A / Min: 0.1A (200-240Vac)
12V SB:
Max: 2A / Min: 0.2A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Platinum Level Certified94%+  Platinum Level

Serial ATA:
8x SATA3 (6Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
1x Type A
VGA:
1x VGA D-Sub connector port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header

5x Hot-swap 8cm rear exhaust PWM fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
30.2" (767mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

BIOS Type:
AMI UEFI

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3108; HW RAID
RAID 0, 1, 5, 6, 10, 50, 60
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

60x Hot-swap 3.5" SAS3/SATA3 drive bays
2x Rear Hot-swap 2.5" SATA drive bays

PCI-Express:
2x PCI-E 3.0 x16 slots
1x PCI-E 3.0 x8 slot
1x SIOM card support
(must bundle with network card)

2000W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1800W/1980W/2000W
Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-120Vac / 12.5-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level
UL/cUL/CB/BSMI/CE/CCC

Serial ATA:
8x SATA3 (6Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
1x Type A
VGA:
1x VGA D-Sub connector port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header

5x Hot-swap 8cm rear exhaust PWM fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), 3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

4U Rackmount Chassis

Width:
17.2" (437mm)
Height:
7" (178mm)
Depth:
30.2" (767mm)

Buttons:
Power On/Off button
System Reset button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
System Overheat LED
Power fail LED

BIOS Type:
AMI UEFI

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3008 AOC; IT Mode
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

60x Hot-swap 3.5" SAS3/SATA3 drive bays
2x Rear Hot-swap 2.5" SATA drive bays

PCI-Express:
2x PCI-E 3.0 x16 slots
1x PCI-E 3.0 x8 slot
1x SIOM card support
(must bundle with network card)

2000W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1800W/1980W/2000W
Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-120Vac / 12.5-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level
UL/cUL/CB/BSMI/CE/CCC

Serial ATA:
8x SATA3 (6Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
1x Type A
VGA:
1x VGA D-Sub connector port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header

5x Hot-swap 8cm rear exhaust PWM fans

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket SP5
AMD EPYC™ 9004 Series Processors
Support CPU TDP up to 360W
Cores:
Up to 96C/192T

Memory:
Memory Capacity: 24 DIMM slots
Up to 6TB: 24x 256 GB DRAM
Memory Type: 4800MHz ECC DDR5 RDIMM/LRDIMM
Note:
Full memory population recommended for optimal performance. 
Memory Voltage:
1.2 V
Error Detection:
ECC

4U Rackmount Chassis

Height:
7" (178mm)
Width:
17.2" (437mm)
Depth:
29" (737mm)

BIOS Type:
AMI 32MB SPI Flash EEPROM

SATA:
SATA3 (6Gbps)
Chipset:
AMD SP5
Network Connectivity:
2x 10GbE BaseT
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Hot-swap:
24x 2.5" hot-swap NVMe/SATA/SAS drive bays (4x 2.5" NVMe dedicated)
M.2:
1 M.2 NVMe OR 1 M.2 SATA3

PCI-Express (PCIe):
9 PCIe 5.0 x16 FHFL slot(s)

2000W 1U redundant power supply W73.5 x L203 x H40mm
Dimension (W x H x L):
73.5 x 40 x 203 mm
AC Input:
1000W: 100-127Vac / 50-60Hz
1800W: 200-220Vac / 50-60Hz
1980W: 220-230Vac / 50-60Hz
2000W: 220-240Vac / 50-60Hz
2000W: 230-240Vac / 50-60Hz
2000W: 230-240Vdc
+12V:
Max: 83A / Min: 0A (100Vac-127Vac)
Max: 150A / Min: 0A (200Vac-220Vac)
Max: 165A / Min: 0A (220Vac-230Vac)
Max: 166A / Min: 0A (230Vac-240Vac)
12V SB:
Max: 3.5A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Titanium Level

Video:
1 VGA port(s)

8 heavy duty fans with optimal fan speed control

4U Rackmount Chassis

Height:
7"
Width:
17.6"
Depth:
34.1"

BIOS Type:
AMI 128MB SPI Flash EEPROM

PCI-Express (PCIe) Configuration:
Default
3 PCIe 4.0 x16 LP slot(s)

6 Heavy Duty 8cm Fan(s)

4U Rackmount Chassis

Height:
7"
Width:
17.6"
Depth:
42.1"

BIOS Type:
AMI 128MB SPI Flash EEPROM

PCI-Express (PCIe) Configuration:
Default
3 PCIe 4.0 x16 LP slot(s)

6 Heavy Duty 8cm Fan(s)