1U - SuperMicro GPU Server

CPU:
Single Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)
Support CPU TDP 70-205W
 

Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0b or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
 

GPU Support:
NVIDIA® Tesla® P100/P40/P4/M60

Memory Capacity:
6 DIMM slots
Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
28.5" (724mm)

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
 

Network Connectivity:
Intel® X550 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
Matrox G200ew graphics

Hot-swap:
6x Hot-swap 2.5" SAS/SATA drive bays
 

M.2:
Supports 2x M.2 form factor 2280
Supports both M.2 NVMe and SATA SSD

1x PCI-E 3.0 x16 slot (center right)
1x PCI-E 3.0 x16 slot (right riser)
1x PCI-E 3.0 x16 slot (left riser)

1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
 

AC Voltage:
1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
 

+5V standby:
6 Amp
 

+12V:
100 Amp/115 Vac
117 Amp/230 Vac
 

With Power Distributor:
+5V: 14 Amp
 

Certification:
Platinum Certified

SATA:
6x SATA3 (6Gbps) ports
 

LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
2x USB 3.0 ports (rear)
 

Video:
1x VGA port
 

Serial Port:
1x Fast UART 16550 header
 

DOM:
2x DOM (Disk on Module) power connectors

8x heavy duty counter-rotating 4cm fans with air shroud and optimal fan speed control

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
3 UPI up to 10.4GT/s
Support CPU TDP up to 165W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
GPU Support:
Please refer to: Compatible GPU list

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
35.2" (894mm)
39.3" (997mm) with rails

Buttons:
Power On/Off button
System Reset button
LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Connectivity:
Intel® X550 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
2x Hot-swap 2.5" SAS/SATA/NVMe drive bays

Fixed:
2x Internal 2.5" drive bays

 

4x PCI-E 3.0 x16 slots (FHFL)
1x PCI-E 3.0 x16 (LP) slot
1x PCI-E 3.0 x8 (LP) slot

2000W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1800W/1980W/2000W
Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-120Vac / 12-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

SATA:
4x SATA3 (6Gbps) ports
LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB:
4x USB 3.0 ports (rear)
Video:
1x VGA port
Serial Header:
1x Fast UART 16550 header

9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
35.2" (894mm)
39.3" (997mm) with rails

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Hot-swap:
2 Hot-swap 2.5" SAS/SATA drive bays

Fixed:
2 Internal 2.5" drive bays

 

M.2
Support 1x M.2 2242/2260/2280
Support M.2 SATA and NVMe

4x PCI-E 3.0 x16 slots (FHFL)
1x PCI-E 3.0 x16 (LP) slot
1x PCI-E 3.0 x8 (LP) slot

2000W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1800W/1980W/2000W
 

Dimension (W x H x L):
73.5 x 40 x 265 mm
 

Input:
100-120Vac / 12-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb:
Max: 2.1A / Min: 0A
 

Output Type:
25 Pairs Gold Finger Connector
 

Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

SATA:
4x SATA3 (6Gbps) ports
 

LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
4x USB 3.0 ports (rear)
Video:
1x VGA port
 

Serial Header:
1x Fast UART 16550 header

9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
3X UPI up to 10.4GT/s
Support CPU TDP up to 165W
 

Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
 

GPU:
4X Nvidia® Tesla® P100 SXM2 GPUs
NVIDIA® NVLINK™ up to 80GB/s

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
35.2" (894mm)
39.3" (997mm) with rails

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
 

Network Connectivity:
Intel® X550 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
ASPEED AST2500 BMC

Hot-swap:
2 Hot-swap 2.5" SAS/SATA drive bays
 

Fixed:
2 Internal 2.5" drive bays

 

M.2
Support 1x M.2 2242/2260/2280
Support M.2 SATA and NVMe

4x PCI-E 3.0 x16 slots
1x PCI-E 3.0 x8 (LP) slot

2000W Redundant Power Supplies with PMBus
 

Total Output Power:
1000W/1800W/1980W/2000W
 

Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-120Vac / 12-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
 

12Vsb:
Max: 2.1A / Min: 0A
 

Output Type:
25 Pairs Gold Finger Connector
 

Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

SATA:
4x SATA3 (6Gbps) ports
 

LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
4x USB 3.0 ports (rear)
 

Video:
1x VGA port
 

Serial Header:
1x Fast UART 16550 header

9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

Slot Count: Onboard Memory
Max Memory: Up to 480GB ECC LPDDR5X
Additional GPU Memory: Up to 96GB ECC HBM3

1U Rackmount Chassis

Height:
1.75" (44 mm)
Width:
17.33" (440 mm)
Depth:
37" (940 mm)

BIOS Type:
AMI 64MB SPI Flash EEPROM

Default
2 PCIe 5.0 x16 FHFL slots

(per Node)
LAN:
1 RJ45 1 GbE Dedicated BMC LAN port
USB:
2 ports(rear)
Video:
1 mini-DP port

Fans:
7 Removable heavy-duty 4cm Fan(s)
Liquid Cooling:
Direct to Chip (D2C) Cold Plate (optional)

Environmental Spec.:
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

CPU:
NVIDIA 72-core NVIDIA Grace CPU on GH200 Grace Hopper™ Superchip
Note:
Supports up to 1000W TDP CPUs (Air Cooled)

Slot Count: Onboard Memory
Max Memory: Up to 480GB ECC LPDDR5X
Additional GPU Memory: Up to 96GB ECC HBM3

1U Rackmount Chassis

Height:
1.7" (43.6 mm)
Width:
17.26" (438.4 mm)
Depth:
35.4" (900 mm)

Buttons:
Power On/Off button

BIOS Type:
AMI 64MB SPI Flash EEPROM

Default
2 PCIe 5.0 x16 FHFL slots

Fans:
9 Removable heavy-duty 4cm Fan(s)

Environmental Spec.:
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Memory:
Memory Capacity: 16 DIMM slots
Up to 4TB: 16x 256 GB DRAM
Up to 6TB: 8x 256 GB DRAM and 8x 512 GB PMem
Memory Type: 3200MHz ECC DDR4 RDIMM;LRDIMM;PMEM
Intel® Optane™ persistent memory 200 series
Memory Voltage:
1.2 V
Error Detection:
ECC

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
23.5" (597mm)

Buttons:
Power On/Off button
Unit Identification (UID) button
LEDs:
HDD activity LED
Network Activity LEDs
Power status LED
Unit Identification (UID) LED

BIOS Type:
AMI 32MB SPI FLASH ROM

SATA:
SATA3 (6Gbps); RAID 0/1/5/10 support
Chipset:
Intel® C621A
Network Connectivity:
with Advanced IO Module, AIOM (OCP 3.0 NIC, refer to AIOM Network Card(s) under Optional Parts List for options)
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Hot-swap:
8x 2.5" hot-swap SATA/SAS drive bays
M.2:
2x PCIe 3.0 x2
M-Key, 2280
Peripheral Bays:
1 DVD slot drive bays (optional)

2 PCIe 4.0 x16 FHHL slot(s)

860W Redundant Platinum Level power supplies
Dimension (W x H x L):
54.5 x 40.25 x 322 mm
AC Input:
800W: 100-127Vac
800W: 100-127Vac / 50-60Hz
860W: 200-240Vac
860W: 200-240Vdc / 50-60Hz
860W: 200-240Vac / 50-60Hz
+12V:
Max: 66.6A / Min: 0A (100Vac-127Vac)
Max: 71.6A / Min: 0A (200Vdc-240Vdc)
Max: 71.6A / Min: 0A (200Vac-240Vac)
5V SB:
Max: 4A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Platinum Level Certified

LAN:
1 Dedicated IPMI LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)
Serial Port:
1 COM Port(s) (1 rear)
DOM:
1 SuperDOM (Disk on Module) port

Fans:
6x 4cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

CPU:
Dual Socket P+ (LGA-4189)
3rd Gen Intel® Xeon® Scalable processors
Core Count:
Up to 40C/80T; Up to 60MB Cache per CPU
Note:
Supports up to 270W TDP CPUs (Air Cooled)

 

Max GPU Count:
Up to 2 double-width GPU(s)

Memory:
Memory Capacity: 32 DIMM slots
Up to 8TB: 32x 256 GB DRAM
Up to 12TB: 16x 512 GB PMem and 16x 256 GB DRAM
Memory Type: 3200MHz ECC DDR4
Intel® Optane™ persistent memory 200 series
Memory Voltage:
1.2 V
Error Detection:
ECC

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
29.4" (747mm)

Buttons:
Power On/Off 
UID button
LEDs:
HDD activity
LAN1 activity
Power
System information

BIOS Type:
AMI 256MB SPI Flash

SATA:
SATA3 (6Gbps); RAID 0/1/5/10 support
NVMe:
NVMe; RAID 0/1/5/10 support (Intel® VROC RAID key required)
Chipset:
Intel® C621A
Network Connectivity:
2x 1GbE BaseT with Intel® i350-AM2 (optional)
4x 1GbE BaseT or 4x 1GbE SFP with Intel® i350-AM4 (optional)
2x 10GbE BaseT with Intel® X550-AT2 (optional)
2x 10GbE SFP+ with Intel® X710-BM2 (optional)
4x 10GbE SFP+ with Intel® XL710-BM1 (optional)
4x 10GbE RJ45/SFP+ with Intel® X710-TM4 (optional)
2x 25GbE SFP28 with Broadcom® BCM57414 (optional)
4x 25GbE RJ45/SFP28 with Mellanox® CX-4 Lx EN Intel® X550-AT2 (optional)
2x 100GbE QSFP28 with Broadcom® BCM57508 (optional)
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Hot-swap:
8x 2.5" hot-swap NVMe/SATA/SAS drive bays (8x 2.5" NVMe hybrid) (Configurable option for 12x 2.5" hot-swap NVMe/SAS/SATA drive bays. NVMe, SATA, or SAS support requires additional parts. Please see the Optional Parts list.)
M.2:
2 M.2 NVMe OR 2 M.2 SATA3
M-Key, 2280/2210

2x 1200W Redundant Titanium Level power supplies
Dimension (W x H x L):
73.5 x 40 x 265 mm
AC Input:
800W: 100-127Vac / 50-60Hz
1200W: 200-240Vac / 50-60Hz
1200W: 230-240Vdc / 50-60Hz (for CCC only)
+12V:
Max: 66.7A / Min: 0A (100Vac-127Vac)
Max: 100A / Min: 0A (200Vac-240Vac)
Max: 100A / Min: 0A (230Vdc-240Vdc) (for CCC only)
12V SB:
Max: 2.1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Titanium Level

LAN:
1 RJ45 Dedicated BMC LAN port
USB:
3 USB 3.0 port(s) (1 front; 2 rear)
Video:
1 VGA port(s)

Fans:
8x 4cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

CPU:
Dual Socket P+ (LGA-4189)
3rd Gen Intel® Xeon® Scalable processors
Core Count:
Up to 40C/80T; Up to 60MB Cache per CPU
Note:
Supports up to 270W TDP CPUs (Air Cooled)

 

 

Max GPU Count:
Up to 2 double-width or 2 single-width GPU(s)
Supported GPU:
NVIDIA PCIe: A100, A16, A2, T4
View Complete List

Memory:
Memory Capacity: 32 DIMM slots
Up to 8TB: 32x 256 GB DRAM
Up to 12TB: 16x 512 GB PMem and 16x 256 GB DRAM
Memory Type: 3200/2933/2666MHz ECC DDR4 RDIMM;LRDIMM
Intel® Optane™ persistent memory 200 series
Memory Voltage:
1.2 V
Error Detection:
ECC

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
29.1" (739mm)

Buttons:
Power On/Off 
UID button
LEDs:
HDD activity
LAN1 activity
Power status
System information (overheat/UID) 

BIOS Type:
AMI 32MB SPI Flash EEPROM

SATA:
SATA3 (6Gbps) via Intel® PCH 621A; RAID 0/1/5/10 support
NVMe:
NVMe (16GT/s); RAID 0/1/5/10 support
Chipset:
Intel® C621A
Network Connectivity:
2x 10GbE BaseT with Intel® X710-AT2 (optional) OR
2x 10GbE BaseT and 2x 10GbE SFP+ with Intel® X710-TM4 (optional)
No NIC option supported
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

12x 2.5" hot-swap NVMe/SATA/SAS drive bays (12x 2.5" NVMe hybrid) (SAS/NVMe support requires additional parts. Please contact us for details.)

1 PCIe 4.0 x16 Internal LP slot(s)
1 PCIe 4.0 x16 LP slot(s)
2 PCIe 4.0 x16 FH, 10.5"L slot(s)

1200W Redundant Titanium Level power supplies
Dimension (W x H x L):
73.5 x 40 x 203 mm
AC Input:
800W: 100-127Vac / 50-60Hz
1200W: 200-240Vac / 50-60Hz
1200W: 200-240Vdc / 50-60Hz (for CCC only)
+12V:
Max: 66.7A / Min: 0A (100Vac-127Vac)
Max: 100A / Min: 0A (200Vdc-240Vdc)
Max: 100A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 2.1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Titanium Level

LAN:
1 RJ45 Dedicated BMC LAN port
USB:
3 USB 3.0 port(s) (1 front; 2 rear)
Video:
1 VGA port(s)
Serial Port:
1 COM Port(s) (1 rear)
DOM:
2 SuperDOM (Disk on Module) port

Fans:
8x 4cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

Memory:
Memory Capacity: 16 DIMM slots
Up to 4TB: 16x 256 GB DRAM
Up to 6TB: 8x 256 GB DRAM and 8x 512 GB PMem
Memory Type: 3200MHz ECC DDR4 RDIMM;LRDIMM;PMEM
Intel® Optane™ persistent memory 200 series
Memory Voltage:
1.2 V
Error Detection:
ECC

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
25.6" (650mm)

Buttons:
Power On/Off button
System Reset button
Unit Identification (UID) button
LEDs:
Fan Fail/System Over Heat LED
HDD activity LED
Network Activity LEDs
Power status LED
Unit Identification (UID) LED

BIOS Type:
AMI 32MB SPI FLASH ROM

SATA:
SATA3 (6Gbps); RAID 0/1/5/10 support
Chipset:
Intel® C621A
Network Connectivity:
with Advanced IO Module, AIOM (OCP 3.0 NIC, refer to AIOM Network Card(s) under Optional Parts List for options)
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Hot-swap:
4x 3.5" hot-swap SATA/SAS drive bays (Default 3.5" drive trays can also support 2.5" drives.)
M.2:
2x PCIe 3.0 x2
M-Key, 2280
Peripheral Bays:
2x 2.5" 7mm fixed drive bays (optional)

860W Redundant Platinum Level power supplies
Dimension (W x H x L):
54.5 x 40.25 x 322 mm
AC Input:
800W: 100-127Vac
800W: 100-127Vac / 50-60Hz
860W: 200-240Vac
860W: 200-240Vdc / 50-60Hz
860W: 200-240Vac / 50-60Hz
+12V:
Max: 66.6A / Min: 0A (100Vac-127Vac)
Max: 71.6A / Min: 0A (200Vdc-240Vdc)
Max: 71.6A / Min: 0A (200Vac-240Vac)
5V SB:
Max: 4A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Platinum Level Certified

LAN:
1 Dedicated IPMI LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)
Serial Port:
1 COM Port(s) (1 rear)
DOM:
1 SuperDOM (Disk on Module) port

Fans:
6x 4cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

CPU:
Dual Socket P+ (LGA-4189)
3rd Gen Intel® Xeon® Scalable processors
Core Count:
Up to 40C/80T; Up to 60MB Cache per CPU
Note:
Supports up to 270W TDP CPUs (Air Cooled)

 

 

Max GPU Count:
Up to 2 double-width or 2 single-width GPU(s)
Supported GPU:
NVIDIA PCIe: A100, A16, RTX A4000, A2, A30, T4

Memory:
Memory Capacity: 32 DIMM slots
Up to 8TB: 32x 256 GB DRAM
Up to 12TB: 16x 512 GB PMem and 16x 256 GB DRAM
Memory Type: 3200/2933/2666MHz ECC DDR4 RDIMM;LRDIMM
Intel® Optane™ persistent memory 200 series
Memory Voltage:
1.2 V
Error Detection:
ECC

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
29.7" (754mm)

Buttons:
Power On/Off 
UID button
LEDs:
HDD activity
LAN1 activity
LAN2 acticity
Power status
System information (overheat/UID) 

BIOS Type:
AMI 32MB SPI Flash EEPROM

SATA:
SATA3 (6Gbps); RAID 0/1/5/10 support
NVMe:
NVMe (16GT/s); RAID 0/1/5/10 support
Chipset:
Intel® C621A
Network Connectivity:
2x 10GbE BaseT with Intel® X710-AT2 (optional) OR
2x 10GbE BaseT and 2x 10GbE SFP+ with Intel® X710-TM4 (optional)
No NIC option supported
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

4x 3.5" hot-swap NVMe/SATA/SAS drive bays (4x 2.5" NVMe hybrid) (SAS/NVMe support requires additional parts. Please see the Optional Parts list.)

1 PCIe 4.0 x16 Internal LP slot(s)
1 PCIe 4.0 x16 LP slot(s)
2 PCIe 4.0 x16 FH, 10.5"L slot(s)

1200W Redundant Titanium Level power supplies
Dimension (W x H x L):
73.5 x 40 x 203 mm
AC Input:
800W: 100-127Vac / 50-60Hz
1200W: 200-240Vac / 50-60Hz
1200W: 200-240Vdc / 50-60Hz (for CCC only)
+12V:
Max: 66.7A / Min: 0A (100Vac-127Vac)
Max: 100A / Min: 0A (200Vdc-240Vdc)
Max: 100A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 2.1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Titanium Level

LAN:
1 RJ45 Dedicated BMC LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)
Serial Port:
1 COM Port(s) (1 rear)
DOM:
2 SuperDOM (Disk on Module) port

Fans:
8x 4cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)