1U - SuperMicro Ultra Servers

Results For: 1U - SuperMicro Ultra Servers

1029UZ-TN20R25M

$5,028.00

SKU	SYS-1029UZ-TN20R25M

Processor

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),3 UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

Chassis

1U Rackmount Chassis

Dimensions

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
27.8" (706mm)

Front Panel

Buttons:
Power On/Off button
System UID button
LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
UID LED

Bios	BIOS Type: AMI 32Mb SPI Flash ROM

Onboard Devices

Chipset:

Intel® C621 chipset

SATA:

SATA3 (6Gbps); RAID 0, 1, 5, 10

Network Connectivity

2x 25GbE SFP28 ports via AOC-URN4-M2TS-O (Mellanox ConnectX-4 Lx EN)

IPMI:

Support for Intelligent Platform Management Interface v.2.0

IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Graphics:

ASPEED AST2500 BMC

HDD Drive Bays

20x Hot-swap 2.5" 7mm drive bays
20x NVMe (CPU1: 8x NVMe + 2x NVMe/SAS/SATA3 hybrid ports, CPU2: 10x NVMe ports)

Expansion Slots

2 PCI-E 3.0 x8 slots (Full-height, Full-length)

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Power Supply

1600W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1600W
Dimension (W x H x L):
73.5 x 40 x 203 mm
Input:
100-127Vac / 13 - 9A / 50-60Hz
200-240Vac / 10 - 8A / 50-60Hz
+12V:
Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level UL/cUL/CB/BSMI/CE/CCC

Input Output

NVMe:
8x NVMe ports + 2 SAS/SATA3/NVMe Hybrid Ports (from CPU 1)
10x NVMe ports (from CPU 2)
LAN:
2x 25GbE SFP28 ports
1x RJ45 Dedicated IPMI LAN port
USB:
3x USB 3.0 ports
(2x rear, 1x Type A)
2x USB 2.0 ports
(front)
Video:
1x VGA port
Serial Port:
1x Serial header
DOM:
2x SuperDOM (Disk on Module) ports

Cooling

Fans:
8x Heavy duty fans with optimal fan speed control
Air Shroud:
2x Air Shroud

Operating Environment

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature:
-20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity:
10% to 85% (non-condensing)
Non-operating Relative Humidity:
10% to 95% (non-condensing)

Details

Management
Software:
Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor® 5
WatchDog
Power Configurations:
ACPI Power Management

PC Health Monitoring
CPU:
Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator
FAN:
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors

6019U-TN4RT

$3,160.00

CONFIGURE

SKU	SYS-6019U-TN4RT

Processor

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W

Cores:
Up to 28 Cores

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
2666 ECC DDR4 NVDIMM

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

Chassis

1U Rackmount Chassis

Dimensions

Height:
1.7" (43mm)

Width:
17.2" (437mm)

Depth:
29" (737mm)

Front Panel

Buttons:
Power On/Off button
System Reset button

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Bios	BIOS Type: AMI 32Mb SPI Flash ROM

Onboard Devices

Chipset:
Intel® C621 chipset

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10

Network Connectivity:
2x 10GBase-T ports via (AOC-UR-I2XT)

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Graphics:
ASPEED AST2500 BMC

HDD Drive Bays

Hot-swap:

4x Hot-swap 3.5" drive bays:

4x NVMe/SATA3 hybrid ports (optional SAS3 via AOC)

M.2:

1x M.2 NVMe (2242/2260/2280/22110)

1x M.2 SATA (2242/2260/2280/22110) via optional SATA cable

(2280/22110 Not supported if installing both NVMe & SATA M.2)

Expansion Slots

2x PCI-E 3.0 x16 (Full-height, 10.5" L)
2x PCI-E 3.0 x8 (1 LP, 1 internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Power Supply

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output

AC Input:
100-127Vac, 50-60Hz
200-240Vac, 50-60Hz

+12V:
Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 62.5A & Min: 0A (200Vac-240Vac)

12V SB:
Max: 2.1A
Min: 0A

Certification:
Platinum Level Certified

Input Output

SATA/NVMe:
4x SATA3 (6Gbps)/NVMe ports

LAN:
2x RJ45 10GBase-T Ethernet ports
1x RJ45 Dedicated IPMI LAN port

USB:
3x USB 3.0 ports (2x rear, 1x Type A)

Video:
2x VGA ports (1x rear, 1x onboard)

Serial Port:
1x Serial header

DOM:
2x SATA DOM (Disk on Module) support with embedded power

Cooling

Fans:
8x heavy duty fans with optimal fan speed control

Air Shroud:
1x Air Shroud

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

Details

Management
Software:
Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor® 5
Power Configurations:
ACPI Power Management

PC Health Monitoring
CPU:
Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator
FAN:
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors

Refine

Manufacturer

All Manufacturers

Price Range

Any Price

1U - SuperMicro Ultra Servers

Category

Manufacturer

Price Range

Keyword