1-800-526-8650
Components
  /    /    /  
T3048-LY2
$6,793.00 Configured Summary
T3048-LY2
Quanta 48x 1/10GbE SFP+ & 4x 40GbE QSFP+ ports Powerful Spine/Leaf Switch for Datacenter and Cloud Computing
 
  • 1+1 hot-swappable power supplies
  • Out-of-band management supported
  • 802.1D, 802.1w, and 802.1s supported
  • Up to 8 ports per link aggregation group (LACP) and up to 64 groups
  • Multi-chassis LAG (MLAG) for preventing the risks of single point failure
  • Up to 32 paths ECMP routing for load balancing and redundancy
  • Virtual Router Redundancy Protocol supported
Note: Image above may show a varied configuration or optional part. Please refer to parts list for standard parts included.
SKU T3048-LY2
Details
Physical ports
Port configuration:

48 1/10GbE SFP+ and 4 40GbE QSFP+ ports
Management Port:
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port:
1 (RJ-45)

Performance
Switching capacity:
1.28Tbps
Maximum forwarding rate:
952Mpps
Latency:
<1.2us
MAC:
128K
 
Layer 2 Features
Switching Mode:
Store-and-Forward
Spanning Tree:
802.1D, 802.1w & 802.1s 
Fast Forwarding 
Edge Port 
Loop Guard 
BPDU Filter/Guard 
Auto Edge 
TCN Guard 
Root Guard
VLAN:
IEEE 802.1Q Tagged Base 
Port-Based 
Private VLAN 
GVRP/GMRP 
802.1v Protocol VLAN 
Voice VLAN 
MAC-Based VLAN 
IP-Subnet VLAN 
MAC-Based Voice VLAN 
QinQ 
Storm Control:
Broadcast 
Unknown Multicast 
DLF (Unknown Unicast)
IGMP Snooping:
v1/v2/v3 
v1/v2 Querier 
Immediate Leave 
Link Aggregation:
802.3ad with LACP (64 groups) 
Static Trunk 
Unicast/Multicast Traffic Balance over Trunking Port 
LACP Fallback
Link State
Port Backup
Error-Disable Recovery
 
QoS Features
Scheduling for priority queue:

WRR, Strict, and Hybrid
COS:
802.1p, IP TOS precedence, & DSCP
DiffServ
iSCSI optimization
Auto VoIP
Port rate limit

Security Features
static and dynamic port security (MAC-based)

802.1x:
Port-based, MAC-based, auto VLAN assignment, guest VLAN, unauthenticated VLAN
Access Control List:
L2/L3/L4
IPv6 ACL:
L3/L4
RADIUS:
Authentication and accounting
TACACS+:
Authentication
HTTPS and SSL:
AES128-cbc, 3ES-cbc, Blowfish-cbc
SSH 1.5/V2.0:
AES128-cbc, 3ES-cbc, Blowfish-cbc
User name and password:
Local Authentication, Remote Authentication via RADIUS/TACACS+, AAA
Denial of Service control
Management IP filtering:
SNMP/Web/Telnet/SSH
MAC filtering
IP Source Guard
Dynamic ARP inspection (DAI)
DHCP snooping
Web Authentication (Captive Portal)

Layer 3 Features
IP Multinetting/CIDR
/31 subnets
Proxy ARP
IRDP
Static route
RIP v1/v2
OSPF
ECMP
BGP4
IGMP v1/v2/v3
DVMRP
PIM-DM/-SM
VRRP
Source IP configuration
Policy-based routing

IPv6 L3 Features
RIPng
OSPFv3
MLD v1/v2
PIM-DM6/-SM6

Data Center Features
Congestion Notification (802.1Qau)
Enhanced Transmission Selection (802.1Qaz)
Priority-based Flow Control (802.1Qbb)
DCBX
FCoE Initiationn Protocol (FIP) snooping
EVB/802.1Qbg
 
 
Management Features
Industrial command-line interface
CLI filtering
Web Based Management/HTTPs
Telenet/SSH

Software download/upload:
TFTP, Xmodem, FTP, and SCP/SFTP
Configuration download/upload:
TFTP, Xmodem, FTP, and SCP/SFTP
Dual Image
SNMP v1/v2c/v3
SNMP inform:
v2/v3
RMON 1, 2, 3, & 9
BOOTP:
client/relay
DHCP client
DHCP relay
DHCP L2 option 82 Relay
DHCP L3 option 82 Relay

EVENT/Error log:
Local Flash
DDNS
DNS client
DNS relay
Remote PING
Traceroute
SNTPv4
LDAP client

LLDP:
802.1ab
UDLD
Port mirroring:
SPAN
sFlow v5
Cable test
Email alerting
CLI scheduler
Auto Install
 
IPv6 Management
IPv4/IPv6 Dual Protocol Stack
ICMPv6
ICMPv6 Redirect
IPv6 Path MTU Discovery
IPv6 Neighbor Discovery
Stateless Autoconfiguration
Manual Configuration
DHCPv6
SNMP over IPv6
HTTP over IPv6
SSH over IPv6
IPv6 Telnet Support
IPv6 DNS Resolver
IPv6 RADIUS Support
IPv6 TACACS+ Support
IPv6 Syslog Support
IPv6 SNTP Support
IPv6 TFTP Support
Remote IPv6 Ping
 
High Availability
Redundant power supply:

1+1

Mechanical
Dimension (HxWxD):

42.8x435x393mm
 
Environmental Specifications
Operating temperature:

0~45°C
Operating humidity:
90% maximum relative humidity

Electrical
Power requirement:

100~240VAC, 50/60Hz
Power consumption:
240 watts (L2 64B line rate; 10G-SR optics, 100% fan duty)
 
Safety
UL, cUL, CB, BSMI, CCC

EMC
CE, FCC, VCCI, MSIP, BSMI, CCC

RoHS
Reduction of Hazardous Substances (RoHS) 6
 
Supported Optics and Cables
DAC cable (SFP+): 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, and 5m 
AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m 
DAC cable (QSFP+): 1m, 3m, and 5m 
DAC cable (QSFP+, fan-out): 1m, 3m, and 5m 
AOC cable (QSFP+, 850nm, MMF): 7m, 10m, and 20m 
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic 
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic 
40G optic (QSFP+, MPO, 850nm, MMF): 10GBASE-SR4 
40G optic (QSFP+, LC, 1310nm, SMF): 10GBASE-LR4

Order Information
T3048-LY2 (1LY2BZZ0008) (F-2-B, AC, P2020) 
T3048-LY2 (1LY2BZZ0009) (B-2-F, AC, P2020) 
PSU - Blue (1HY9ZZZ0061) (F-2-B, AC, 470W) 
PSU - Green (1HY9ZZZ002P) (B-2-F, AC, 470W)
T3048-LY2T3048-LY2T3048-LY2T3048-LY2T3048-LY2
Note: Image above may show a varied configuration or optional part. Please refer to parts list for standard parts included.
File Description Date Type Size Download
QuantaMesh T3048-LY2 DS_v01182016 02-29-16 PDF 150.72 KB
Air Flow
Back to front
Front to back
1859
1
6793.0000