SuperMicro High Density Server

CPU:
Intel® Atom™ D525 processor
System Bus:
DMI

(per node)
Memory Capacity:
Two 204-pin SO-DIMM sockets
Up to 4GB unbuffered non-ECC DDR3 800MHz SO-DIMM (Single Channel)
Memory Type:    
DDR3 800MHz unbuf., non-ECC SO-DIMM
DIMM Sizes:
2 GB, 1 GB, 512 MB, 256 MB
Memory Voltage:
1.5V only

2U Rackmount

Height:
3.47" (88mm)
Width:
17.25" (438mm)
Depth:
26.75" (679mm)
Gross Weight:
85 lbs (38.6kg)
Available Colors:
Black

(per hot-swap tray)
Buttons:
Power On/Off button
LEDs:
Power status LED
Network activity LED
System overheat/fan fail/power fail LED

BIOS Type:
AMI BIOS, 8Mb SPI Flash ROM
BIOS Features:
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0 / 3.0
USB Keyboard support
SMBIOS 2.3

Chipset:
Intel ICH9R Express
Intel 82574L
SATA:
6x SATA (3 Gbps)
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers:
High Performance Intel® 82574L Dual Port Gigabit LAN
Virtual Machine Device Queues High efficient I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA:
Matrox G200eW 16MB DDR2
Super I/O:
Nuvoton W83627DHG UBE

24x 2.5" Hot-swap SATA drive bays total
Enterprise SATA HDD only recommended

720W (1+1) Redundant high-efficiency power supply with PMBus
AC Input:
100-240 V, 50-60 Hz, 4-9 Amp
DC Output:
3 Amp @ +5V standby
59 Amp @ +12V
With Power Distributor:
+5V: 30 Amp
Certification:
80+ Gold Certified

(per node)
Serial ATA:
3x SATA ports (3Gbps) through hot-plug slot, with RAID 0, 1, 5
1x SATA port onboard
USB:
6 USB 2.0 ports (2 rear + 4 via 2 headers)
LAN:
2x RJ45 LAN port
IPMI:
Integrated IPMI 2.0 with shared LAN
DOM:
1x DOM (Disk on Module) power connector
Others:
2x COM port headers ready
TPM 20-pin header ready

4x 80mm heavy duty fans with PWM fan speed controls

RoHS:
RoHS Compliant
Environmental Spec.:    
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

2U Rackmount Chassis

Width:
17.6" (447mm)
Height:
3.47" (88mm)
Depth:
28.75" (730mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3216; IT mode
Network:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video:
ASPEED AST2500 BMC

(per Node)

2x PCI-E 3.0 x8 slots
1x PCI-E 3.0 x16 slot
1x SIOM card support
(must bundle with network card)
 

2200W Redundant Power Supplies with PMBus
Total Output Power:
1200W/1800W/1980W/2090/2200W
Dimension (W x H x L):
45 x 40 x 480 mm
Input:
100-127Vac / 50-60Hz (1200W)
200-220Vac / 50-60Hz (1800W)
220-230Vac / 50-60Hz (1980W)
230-240Vac / 50-60Hz (2090W)
For TUV/CB/others safety rating only
180-220Vac / 50-60Hz (2090W)
For UL/cUL safety rating only
220-240Vac / 50-60Hz (2200W)
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 174.17A / Min: 0A (180-220Vac)
Max: 183.33A / Min: 0A (220-240Vac)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
Backplanes (connector)
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

 (per Node)
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
Video:
1x VGA port
DOM:
1x SuperDOM (Disk on Module) port

4x Heavy duty 8cm PWM fans with air shroud

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

(per Node)
CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
200W/205W CPUs are supported under certain configurations. Please contact Supermicro Technical Support for additional information about specialized system optimization
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

(per Node)
Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3008; IT mode
Network:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video:
ASPEED AST2500 BMC

 (per Node)
PCI-Express:
2x PCI-E 3.0 (x16) Low-profile slots
1x SIOM card support
(must bundle with network card)

2200W Redundant Power Supplies with PMBus
Total Output Power:
1200W/1800W/1980W/2090/2200W
Dimension (W x H x L):
45 x 40 x 480 mm
Input:
100-127Vac / 50-60Hz (1200W)
200-220Vac / 50-60Hz (1800W)
220-230Vac / 50-60Hz (1980W)
230-240Vac / 50-60Hz (2090W)
For TUV/CB/others safety rating only
180-220Vac / 50-60Hz (2090W)
For UL/cUL safety rating only
220-240Vac / 50-60Hz (2200W)
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 174.17A / Min: 0A (180-220Vac)
Max: 183.33A / Min: 0A (220-240Vac)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
Backplanes (connector)
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

(per Node)
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
Video:
1x VGA port
DOM:
1x SuperDOM (Disk on Module) port
 

4x Heavy duty 8cm PWM fans with air shroud

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

(per Node)
Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.
 

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

Chipset:
Intel® C621 chipset
Network:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video:
ASPEED AST2500 BMC

24x Hot-swap 2.5" NVMe drive bays

(per Node)
PCI-Express:
2x PCI-E 3.0 (x16) Low-profile slots
1x SIOM card support
(must bundle with network card)

2200W Redundant Power Supplies with PMBus
Total Output Power:
1200W/1800W/1980W/2090/2200W
Dimension (W x H x L):
45 x 40 x 480 mm
Input:
100-127Vac / 50-60Hz (1200W)
200-220Vac / 50-60Hz (1800W)
220-230Vac / 50-60Hz (1980W)
230-240Vac / 50-60Hz (2090W)
For TUV/CB/others safety rating only
180-220Vac / 50-60Hz (2090W)
For UL/cUL safety rating only
220-240Vac / 50-60Hz (2200W)
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 174.17A / Min: 0A (180-220Vac)
Max: 183.33A / Min: 0A (220-240Vac)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
Backplanes (connector)
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

(per Node)
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
Video:
1x VGA port
DOM:
1x SuperDOM (Disk on Module) port

4x Heavy duty 8cm PWM fans with air shroud

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

(per Node)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
Note:
200W/205W CPUs are supported under certain configurations. Please contact Supermicro Technical Support for additional information about specialized system optimization
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

(per Node)

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
Storage:
SATA3 (6Gbps) via Intel C620 controller; RAID 0, 1, 5, 10 per node
Network:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video:
ASPEED AST2500 BMC

24x Hot-swap 2.5" SATA3 drive bays

 (per Node)
PCI-Express:
2x PCI-E 3.0 (x16) Low-profile slots
1x SIOM card support
(must bundle with network card)
 

2200W Redundant Power Supplies with PMBus
Total Output Power:
1200W/1800W/1980W/2090/2200W
Dimension (W x H x L):
45 x 40 x 480 mm
Input:
100-127Vac / 50-60Hz (1200W)
200-220Vac / 50-60Hz (1800W)
220-230Vac / 50-60Hz (1980W)
230-240Vac / 50-60Hz (2090W)
For TUV/CB/others safety rating only
180-220Vac / 50-60Hz (2090W)
For UL/cUL safety rating only
220-240Vac / 50-60Hz (2200W)
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 174.17A / Min: 0A (180-220Vac)
Max: 183.33A / Min: 0A (220-240Vac)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
Backplanes (connector)
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

 (per Node)
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
Video:
1x VGA port
DOM:
1x SuperDOM (Disk on Module) port

4x Heavy duty 8cm PWM fans with air shroud

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

(per Node)
Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32Mb SPI Flash ROM

 

Chipset:
Intel® C621 chipset
SAS:
Broadcom 3008 SAS3 (12Gbps) controller; RAID 0, 1, 10 support
Network Controllers:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

24x Hot-swap 2.5" SAS/SATA HDD trays

(per Node)
2x PCI-E 3.0 x16 Low-profile slots
1x SIOM card support
Note: Must bundle with Network Card
(Both CPUs need to be installed for full access to PCI-E slots)

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per Node)
SAS:
6x SAS3 (12Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header (internal)
Others:
2x SATADOM support on the motherboard

4x Heavy duty 8cm PWM fans with optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

 

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32MB SPI Flash ROM

Chipset:
Intel® C621 chipset
SAS:
Broadcom 3108 SAS3 (12Gbps) controller; RAID 0, 1, 5, 6, 10, 50 support
Optional SuperCap
Network Controllers:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

24x Hot-swap 2.5" SAS/SATA HDD trays

(per Node)
2x PCI-E 3.0 x16 Low-profile slots
1x SIOM card support
Note: Must bundle with Network Card
(Both CPUs need to be installed for full access to PCI-E slots)

 

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Titanium Level
UL/cUL/CB/BSMI/CE/CCC

(per Node)
SAS:
6x SAS3 (12Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1 Header (internal)
Others:
2x SATADOM support on the motherboard

4x Heavy duty 8cm PWM fans with optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

 (per Node)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
Dual UPI up to 10.4GT/s
Support CPU TDP 70-165W
Cores:
Up to 28 Cores
Note:
Please contact Supermicro Technical Support for supporting conditions of high power (TDP 150W and above) or high base frequency (3.0 GHz and above) processors.
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32MB SPI Flash ROM

24x Hot-swap 2.5" SATA3 drive bays

(per Node)
PCI-Express:
2x PCI-E 3.0 x16 Low-profile slots
1x SIOM card support
Note: Must bundle with Network Card
(Both CPUs need to be installed for full access to PCI-E slots)

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

 (per Node)
SATA:
6x SATA3 (6Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1 Header (internal)
Others:
2x SATADOM support on the motherboard

4x Heavy duty 8cm PWM fans with optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

 

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32MB SPI Flash ROM

Chipset:
Intel® C621 chipset
SAS:
Broadcom 3008 SAS3 (12Gbps) controller; RAID 0, 1, 10 support
Network Controllers:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

12x Hot-swap 3.5" SAS/SATA HDD trays

(per Node)
2x PCI-E 3.0 x16 Low-profile slots
1x SIOM card support
Note: Must bundle with Network Card
 

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per Node)
SAS:
3x SAS3 (12Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports total (rear)
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header (internal)
Others:
2x SATADOM support on the motherboard

4x Heavy duty 8cm PWM fans with optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

 

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

 

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32MB SPI Flash ROM

 

Chipset:
Intel® C621 chipset
SAS:
Broadcom 3108 SAS3 (12Gbps) controller;
RAID 0, 1, 5, 6, 10, 50 support
Network Controllers:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

12x Hot-swap 3.5" SATA3 HDD trays

(per Node)
2x PCI-E 3.0 x16 Low-profile slots
1x SIOM card support
Note: Must bundle with Network Card

 

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per Node)
SAS:
3x SAS3 (12Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports total (rear)
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1x Header (internal)
Others:
2x SATADOM support on the motherboard

4x Heavy duty 8cm PWM fans with optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

Memory Capacity:
16 DIMM slots
Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

2U Rackmount Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

 

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32MB SPI Flash ROM

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10 support
Network Controllers:
Must bundle with at least one SIOM network card
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

12x Hot-swap 3.5" SATA3 HDD trays

(per Node)
2x PCI-E 3.0 x16 Low-profile slots
1x SIOM card support
Note: Must bundle with Network Card

 

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
Titanium Level
UL/cUL/CB/BSMI/CE/CCC

(per Node)
SATA:
3x SATA3 (6Gbps) ports
LAN:
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports total (rear)
VGA:
1x VGA port
Serial Port / Header:
1x Fast UART 16550 port / 1 Header (internal)
Others:
2x SATADOM support on the motherboard

4x Heavy duty 8cm PWM fans with optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

(per Node)
CPU:
Dual Socket P (LGA 3647)
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
Support CPU TDP 70-140W
Cores:
Up to 22 Cores
Note:
BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)

(per Node)
Memory Capacity:
8 DIMM slots
Up to 2TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro

2U Chassis

Width:
17.25" (438mm)
Height:
3.47" (88mm)
Depth:
28.5" (724mm)

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

AMI 32Mb SPI Flash ROM with UEFI

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps); RAID 0, 1, 5 support
Network Controllers:
Intel® C621 chipset
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per Node)
Hot-swap:
3x Hot-swap 3.5" SATA3 HDD trays
Others:
2x SATA DOM
1x PCI-E 3.0 x4 NVMe or 1 SATA M.2 (22110/2280) support via BPN-ADP-6SATA3M2-1UL
M.2 and SuperDOM are for OS boot

(per Node)
PCI-Express:
1x PCI-E 3.0 x16 Low-profile slot

1600W 1U Redundant Power Supplies with PMBus
Total Output Power:
800W: 100 – 140Vac
1600W: 180 – 240Vac
Dimension (W x H x L):
76 x 40.4 x 336 mm
Input:
100-140Vac / 10-7A / 50-60Hz
180-240Vac / 11-8A / 50-60Hz
+12V:
Max: 67A / Min: 0A (100-140Vac)
Max: 133A / Min: 0A (180-240Vac)
+5Vsb:
Max: 1A / Min: 0A
Output Type:
27 Pairs Gold Finger Connector
Certification:
Titanium Level Certified

(per Node)
SATA:
3x SATA3 (6Gbps) ports
LAN:
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports total (rear)
VGA:
1x VGA port
Serial Port / Header:
1x COM Port (1 rear)
Others:
TPM 2.0 Header

4x 8cm heavy duty PWM fans with optimal fan speed controlled

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)

(per Node)
CPU:
Single Socket SP5
AMD EPYC™ 9004 Series Processor
Support CPU TDP up to 360W
Note:
Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

(per Node)
Memory:
Memory Capacity: 12 DIMM slots
Up to 3TB: 12x 256 GB DRAM
Memory Type: 4800MHz ECC DDR5 RDIMM

2U Rackmount Chassis

Height:
3.46" (88mm)
Width:
17.67" (449mm)
Depth:
28" (711.2mm)

Buttons:
Power On/Off button
UID button
LEDs:
HDD activity LED
Network activity LEDs
Power status LED
Universal Information (UID) LED

BIOS Type:
AMI 32MB Flash ROM

(per Node)
Chipset:
AMD SP5
Network Connectivity:
Via IO Module
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Hot-swap:
4x 2.5" hot-swap NVMe/SATA drive bays (4x 2.5" NVMe hybrid)
M.2:
2 M.2 NVMe OR 2 M.2 SATA3

(per Node)
PCI-Express (PCIe):
1 PCIe 5.0 x16 LP slot(s)

Redundant 2200w Titanium Level(96%)High-Efficiency Power Supplies with I2C & PMBus
Dimension (W x H x L):
106 x 84 x 245 mm
AC Input:
100-127Vdc (1200W for the Rest of the World)
200-220Vdc (1800W for the Rest of the World)
200-220Vdc (2090W for North America - UL & cUL)
220-230Vdc (1980W for the Rest of the World)
220-240Vdc (2200W for North America - UL & cUL)
230-240Vdc (2090W for the Rest of the World)
Certification:
Titanium Level

(per Node)
LAN:
1 RJ45 Dedicated BMC LAN port
USB:
2 USB 3.0 port(s) (2 USB)
Video:
1 VGA port(s)

Air Shroud:
1 per node Air Shroud(s)
Fans:
2x 17.6K RPM Heavy Duty 8cm Fan(s)

(per Node)

CPU:
Single Socket SP5
AMD EPYC™ 9004 Series Processor
Support CPU TDP up to 290W 
Note:
Certain CPUs with high TDP may be supported only under specific conditions. Please contact our Technical Support for additional information about specialized system optimization

(per Node)
Memory:
Memory Capacity: 12 DIMM slots
Up to 3TB: 12x 256 GB DRAM
Memory Type: 4800MHz ECC DDR5 RDIMM

2U Rackmount Chassis

Height:
3.46" (88mm)
Width:
17.67" (449mm)
Depth:
28" (711.2mm)

Buttons:
Power On/Off button
UID button
LEDs:
HDD activity LED
Network activity LEDs
Power status LED
Universal Information (UID) LED

BIOS Type:
AMI 32MB Flash ROM

(per Node)
Chipset:
AMD SP5
Network Connectivity:
Via IO Module
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

(per Node)
Hot-swap:
6x 2.5" hot-swap NVMe/SATA drive bays (6x 2.5" NVMe hybrid)
M.2:
2 M.2 NVMe OR 2 M.2 SATA3

Redundant 2200w Titanium Level(96%)High-Efficiency Power Supplies with I2C & PMBus
Dimension (W x H x L):
106 x 84 x 245 mm
AC Input:
100-127Vdc (1200W for the Rest of the World)
200-220Vdc (1800W for the Rest of the World)
200-220Vdc (2090W for North America - UL & cUL)
220-230Vdc (1980W for the Rest of the World)
220-240Vdc (2200W for North America - UL & cUL)
230-240Vdc (2090W for the Rest of the World)
Certification:
Titanium Level

(per Node)
LAN:
1 RJ45 Dedicated BMC LAN port
USB:
2 USB 3.0 port(s) (2 USB)
Video:
1 VGA port(s)

Air Shroud:
1 per node Air Shroud(s)
Fans:
2x 17.6K RPM Heavy Duty 8cm Fan(s)

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

 

4U Rackmount Chassis

Width:
17.63" (448mm)
Height:
6.96" (177mm)
Depth:
29" (737mm)

 

Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
Hard drive activity LED
Network activity LEDs
Information LED (UID, Fan failure, Overheat)

BIOS Type:
128Mb SPI Flash EEPROM with AMI BIOS

 

Chipset:
Intel® C621 chipset
SAS:
SAS3 (12Gbps) via Broadcom 3008
Network Controllers:
Flexible networking via SIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

(per node)
Hot-swap:
6x Hot-swap 2.5" SATA3 or 2x Hot-swap 2.5" SATA3 + 4x NVMe U.2
M.2:
M.2 Support

 

(per node)
PCI-Express:
1x PCI-E 3.0 x16 (Low-profile)
1x PCI-E 3.0 x16 (SIOM)

 

2200W Redundant Power Supplies with PMBus
Total Output Power and Input:
1200W with Input 100-127Vac
1800W with Input 200-220Vac
1980W with Input 220-230Vac
2090W with Input 230-240Vac
2090W with Input 200-220Vac
2200W with Input 220-240Vac (for UL/cUL use only)
2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency:
50-60Hz
Dimension (W x H x L):
76 x 40 x 336 mm
+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 183.3A / Min: 0A (220-240Vac)
5VSB:
Max: 1A / Min: 0A
Output Type:
Backplanes (gold finger)
Certification:
UL/cUL/CB/BSMI/CE/CCC
Titanium Level

(per node)
SAS:
6x SAS3 (12Gbps) ports
NVMe:
4x NVMe U.2 option
LAN:
SIOM flexible Network card
1x RJ45 Dedicated IPMI LAN port
USB:
2x USB 3.0 ports (rear)
VGA:
1x VGA port

(per node)
3x 4cm 20k RPM middle fans

 

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)