CALL TODAYLOGINCart(0)$0.00

1U - SuperMicro Intel Xeon Scalable Servers

 
  • 1019GP-TT
    1019GP-TT
    $2,573.00
    SKU
    SYS-1019GP-TT 
    Processor
    CPU:
    Single Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)
    Support CPU TDP 70-205W
     
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0b or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    GPU Support:
    NVIDIA® Tesla® P100/P40/P4/M60
     
    Memory
    Memory Capacity:
    6 DIMM slots
    Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    28.5" (724mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps) with RAID 0, 1, 5, 10
     
    Network Connectivity:
    Intel® X550 Dual Port 10GBase-T
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    Matrox G200ew graphics
     
    HDD Drive Bays
    Hot-swap:
    6x Hot-swap 2.5" SAS/SATA drive bays
     
    M.2:
    Supports 2x M.2 form factor 2280
    Supports both M.2 NVMe and SATA SSD
     
    Expansion Slots
    1x PCI-E 3.0 x16 slot (center right)
    1x PCI-E 3.0 x16 slot (right riser)
    1x PCI-E 3.0 x16 slot (left riser)
     
    Power Supply
    1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
     
    AC Voltage:
    1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
    1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
     
    +5V standby:
    6 Amp
     
    +12V:
    100 Amp/115 Vac
    117 Amp/230 Vac
     
    With Power Distributor:
    +5V: 14 Amp
     
    Certification:
    Platinum Certified
     
    Input Output
    SATA:
    6x SATA3 (6Gbps) ports
     
    LAN:
    2x RJ45 10GBase-T ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    2x USB 3.0 ports (rear)
     
    Video:
    1x VGA port
     
    Serial Port:
    1x Fast UART 16550 header
     
    DOM:
    2x DOM (Disk on Module) power connectors
     
    Cooling
    8x heavy duty counter-rotating 4cm fans with air shroud and optimal fan speed control
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
    Software:

    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
    PC Health Monitoring
     
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1019P-WTR
    1019P-WTR
    $2,609.00
    SKU
    SYS-1019P-WTR 
    Processor
    CPU:
    Single Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake)
    Support CPU TDP 70-205W
     
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0b or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    6 DIMM slots
    Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    23.5" (597mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED
    Information LED (temp., status)
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C622 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
     
    Network Controllers:
    Dual Intel® X557 10GBase-T LAN ports
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Video:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    10x Hot-swap 2.5" SATA3 drive bays
    2x NVMe with AOC (option)
     
    M.2:
    M.2 mini-PCI-e support
     
    Expansion Slots
    2x PCI-E 3.0 x16 (FHFL) slots
    1x PCI-E 3.0 x8 (LP) slot
     
    Power Supply
    500W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFC
     
    AC Input:
    100-240V, 50-60Hz, 6.1-2.6A
     
    DC Output:
    +5V standby: 3A
    +12V: 42A
     
    With Power Distributor:
    +5V: 25A
    +3.3V: 12A
    -12V: 0.6A
     
    Certification:
    Platinum Level Certified
     
    Input Output
    SATA:
    10x SATA3 (6Gbps) ports
     
    LAN:
    2x RJ45 10GBase-T LAN ports
    1x RJ45 dedicated IPMI LAN port
     
    USB:
    2x USB 3.0 ports (rear)
    2x USB 2.0 ports (rear)
     
    Video:
    1x VGA port
     
    Serial Port / Header:
    2x COM ports (1x rear, 1x header)
     
    SuperDOM:
    2x SuperDOM (Disk on Module) ports with built-in power
     
    Cooling
    5x counter-rotation 40x56mm PWM fans
    1x fan for AOC cooling (option)
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature: 
       -40°C to 70°C (-40°F to 158°F)
    Operating Relative Humidity: 
       8% to 90% (non-condensing)
    Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
    PC Health Monitoring
    CPU:

    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029GQ-TNRT
    1029GQ-TNRT
    $4,116.00
    SKU
    SYS-1029GQ-TNRT 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    3 UPI up to 10.4GT/s
    Support CPU TDP up to 165W
    Cores:
    Up to 28 Cores
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
    GPU Support:
    Please refer to: Compatible GPU list
     
    Memory
    Memory Capacity:
    12 DIMM slots
    Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
    Width:
    17.2" (437mm)
    Depth:
    35.2" (894mm)
    39.3" (997mm) with rails
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
    SATA:
    SATA3 (6Gbps) with RAID 0, 1, 5, 10
    Network Connectivity:
    Intel® X550 Dual Port 10GBase-T
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    2x Hot-swap 2.5" SAS/SATA/NVMe drive bays

    Fixed:
    2x Internal 2.5" drive bays
     
    M.2
    Support 1x M.2 2242/2260/2280
    Support M.2 SATA and NVMe
     
    Expansion Slots
    4x PCI-E 3.0 x16 slots (FHFL)
    1x PCI-E 3.0 x16 (LP) slot
    1x PCI-E 3.0 x8 (LP) slot
     
    Power Supply
    2000W Redundant Power Supplies with PMBus
    Total Output Power:

    1000W/1800W/1980W/2000W
    Dimension (W x H x L):
    73.5 x 40 x 265 mm
    Input:
    100-120Vac / 12-9.5A / 50-60Hz
    200-220Vac / 10-9.5A / 50-60Hz
    220-230Vac / 10-9.8A / 50-60Hz
    230-240Vac / 10-9.8A / 50-60Hz
    200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
    +12V:
    Max: 83.3A / Min: 0A (100-120Vac)
    Max: 150A / Min: 0A (200-220Vac)
    Max: 165A / Min: 0A (220-230Vac)
    Max: 166.7A / Min: 0A (230-240Vac)
    Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
    12Vsb:
    Max: 2.1A / Min: 0A
    Output Type:
    25 Pairs Gold Finger Connector
    Certification:
    UL/cUL/CB/BSMI/CE/CCC
      Titanium Level
     
    Input Output
    SATA:
    4x SATA3 (6Gbps) ports
    LAN:
    2x RJ45 10GBase-T ports
    1x RJ45 Dedicated IPMI LAN port
    USB:
    4x USB 3.0 ports (rear)
    Video:
    1x VGA port
    Serial Header:
    1x Fast UART 16550 header
     
    Cooling
    9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control
     
    Operating Environment
    RoHS:
    RoHS Compliant
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
    Software:

    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
    Power Configurations:
    ACPI / APM Power Management
     
    PC Health Monitoring
    CPU:

    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029GQ-TRT
    1029GQ-TRT
    $4,576.00
    SKU
    SYS-1029GQ-TRT 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    3 UPI up to 10.4GT/s
    Support CPU TDP up to 165W
     
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    GPU Support:
    Please refer to: Compatible GPU list
     
    Memory
    Memory Capacity:
    12 DIMM slots
    Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    35.2" (894mm)
    39.3" (997mm) with rails
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps) with RAID 0, 1, 5, 10
     
    Network Connectivity:
    Intel® X550 Dual Port 10GBase-T
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    2 Hot-swap 2.5" SAS/SATA drive bays

    Fixed:
    2 Internal 2.5" drive bays
     
    M.2
    Support 1x M.2 2242/2260/2280
    Support M.2 SATA and NVMe
     
    Expansion Slots
    4x PCI-E 3.0 x16 slots (FHFL)
    1x PCI-E 3.0 x16 (LP) slot
    1x PCI-E 3.0 x8 (LP) slot
     
    Power Supply
    2000W Redundant Power Supplies with PMBus
    Total Output Power:

    1000W/1800W/1980W/2000W
     
    Dimension (W x H x L):
    73.5 x 40 x 265 mm
     
    Input:
    100-120Vac / 12-9.5A / 50-60Hz
    200-220Vac / 10-9.5A / 50-60Hz
    220-230Vac / 10-9.8A / 50-60Hz
    230-240Vac / 10-9.8A / 50-60Hz
    200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
    +12V:
    Max: 83.3A / Min: 0A (100-120Vac)
    Max: 150A / Min: 0A (200-220Vac)
    Max: 165A / Min: 0A (220-230Vac)
    Max: 166.7A / Min: 0A (230-240Vac)
    Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
    12Vsb:
    Max: 2.1A / Min: 0A
     
    Output Type:
    25 Pairs Gold Finger Connector
     
    Certification:
    UL/cUL/CB/BSMI/CE/CCC
      Titanium Level
     
    Input Output
    SATA:
    4x SATA3 (6Gbps) ports
     
    LAN:
    2x RJ45 10GBase-T ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    4x USB 3.0 ports (rear)
    Video:
    1x VGA port
     
    Serial Header:
    1x Fast UART 16550 header
     
    Cooling
    9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control
     
    Operating Environment
    RoHS:
    RoHS Compliant
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
    Software:

    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
    PC Health Monitoring
     
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029GQ-TXRT
    1029GQ-TXRT
    $6,372.00
    SKU
    SYS-1029GQ-TXRT 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    3X UPI up to 10.4GT/s
    Support CPU TDP up to 165W
     
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    GPU:
    4X Nvidia® Tesla® P100 SXM2 GPUs
    NVIDIA® NVLINK™ up to 80GB/s
     
    Memory
    Memory Capacity:
    12 DIMM slots
    Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    35.2" (894mm)
    39.3" (997mm) with rails
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps) with RAID 0, 1, 5, 10
     
    Network Connectivity:
    Intel® X550 Dual Port 10GBase-T
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    2 Hot-swap 2.5" SAS/SATA drive bays
     
    Fixed:
    2 Internal 2.5" drive bays
     
    M.2
    Support 1x M.2 2242/2260/2280
    Support M.2 SATA and NVMe
     
    Expansion Slots
    4x PCI-E 3.0 x16 slots
    1x PCI-E 3.0 x8 (LP) slot
     
    Power Supply
    2000W Redundant Power Supplies with PMBus
     
    Total Output Power:
    1000W/1800W/1980W/2000W
     
    Dimension (W x H x L):
    73.5 x 40 x 265 mm
    Input:
    100-120Vac / 12-9.5A / 50-60Hz
    200-220Vac / 10-9.5A / 50-60Hz
    220-230Vac / 10-9.8A / 50-60Hz
    230-240Vac / 10-9.8A / 50-60Hz
    200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
    +12V:
    Max: 83.3A / Min: 0A (100-120Vac)
    Max: 150A / Min: 0A (200-220Vac)
    Max: 165A / Min: 0A (220-230Vac)
    Max: 166.7A / Min: 0A (230-240Vac)
    Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
     
    12Vsb:
    Max: 2.1A / Min: 0A
     
    Output Type:
    25 Pairs Gold Finger Connector
     
    Certification:
    UL/cUL/CB/BSMI/CE/CCC
      Titanium Level
     
    Input Output
    SATA:
    4x SATA3 (6Gbps) ports
     
    LAN:
    2x RJ45 10GBase-T ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    4x USB 3.0 ports (rear)
     
    Video:
    1x VGA port
     
    Serial Header:
    1x Fast UART 16550 header
     
    Cooling
    9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
    PC Health Monitoring
     
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029P-MT
    1029P-MT
    $2,330.00
    SKU
    SYS-1029P-MT 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    Dual UPI up to 10.4GT/s
    Support CPU TDP 70-140W with IVR
     
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    8 DIMM slots
    Up to 2TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Width:
    17.2" (437mm)
     
    Height:
    1.7" (43mm)
     
    Depth:
    19.98" (508mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power status LED
    HDD activity LED
    Network activity LEDs
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    256Mb SPI Flash EEPROM with AMI BIOS
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
    Network Controllers
    Marvell 88E1512 PHY Gigabit Ethernet controller
    Supports 1000BASE-T
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Video:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    8x Hot-swap 2.5" SATA3 drive bays
     
    Optical Drive
    1x Slim DVD-ROM drive (optional)
    PCIe/SATA M.2 drive (optional)
     
    Expansion Slots
    1x PCI-E 3.0 x8 (FHHL) slot
     
    Power Supply
    600W High-Efficiency Power Supply w/PMBus 1.2, I2C, PFC, and Digital Switching
     
    AC Input:
    100-240V, 50-60Hz
     
    DC Output:
    +3.3V: 15A
    +5V: 18A
    +5V standby: 3A
    +12V: 49A
    -12V: 0.5A
     
    Certification:
    Platinum Level Certified  
     
    Input Output
    SATA:
    8x SATA3 (6Gbps) ports
     
    LAN:
    2x RJ45 Gigabit Ethernet LAN ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    2x USB 2.0 ports (rear)
     
    Video:
    1x VGA port
     
    Serial Port / Header:
    1x COM port (header)
     
    DOM:
    2x SuperDOM (Disk on Module) ports
     
    Cooling
    4x 4cm 22.5K RPM middle cooling fans
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature: 
       -40°C to 70°C (-40°F to 158°F)
    Operating Relative Humidity: 
       8% to 90% (non-condensing)
    Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
    PC Health Monitoring
    CPU:

    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
    PECI
     
  • 1029P-MTR
    1029P-MTR
    $2,652.00
    SKU
    SYS-1029P-MTR 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    Intel® Xeon® Scalable Processors,
    Dual UPI up to 10.4GT/s
    Support CPU TDP 45-140W with IVR
     
    Cores:
    Up to 28 Cores with Intel® HT Technology
     
    Memory
    Memory Capacity:
    8 DIMM slots
    Up to 1TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666MHz
     
    Memory Type:
    2666/2400/2133MHz ECC DDR4 SDRAM
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Width:
    17.2" (437mm)
    Height:
    1.7" (43mm)
    Depth:
    19.98" (508mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power status LED
    HDD activity LED
    Network activity LEDs
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    256Mb SPI Flash EEPROM with AMI BIOS
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
    Network Controllers
    Marvell 88E1512 PHY Gigabit Ethernet controller
    Supports 1000BASE-T
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Video:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    8x Hot-swap 2.5" SATA3 drive bays
     
    Optical Drive
    Slim DVD-ROM drive (optional)
    PCIe/SATA M.2 drive (optional)
     
    Expansion Slots
    1x PCI-E 3.0 x8 (FHHL) slot
     
    Power Supply
    600W Redundant High-Efficiency Power Supplies, PMBus 1.2
     
    AC Input:
    100-240V, 50-60Hz
    Dimension(W x H x L):
    54.5 x 40.25 x 220 mm
     
    Output:
      +5V standby: 3A
      +12V: 50A (100Vac-240Vac)
     
    Certification:
    Platinum Level Certified
     
    Input Output
    SATA:
    8x SATA3 (6Gbps) ports
     
    LAN:
    2x RJ45 Gigabit Ethernet LAN ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    2x USB 2.0 ports (rear)
     
    Video:
    1x VGA port
    Serial Port / Header:
    1x COM port (header)
     
    DOM:
    2x SuperDOM (Disk on Module) ports
     
    Cooling
    4x 4cm 22.5K RPM middle cooling fans
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature: 
       -40°C to 70°C (-40°F to 158°F)
    Operating Relative Humidity: 
       8% to 90% (non-condensing)
    Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
     
    Details
    Management
    Software:

    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
    PC Health Monitoring
     
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029P-N32R
    1029P-N32R
    Please Inquire
    SKU
    SYS-1029P-N32R 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    3 UPI up to 10.4GT/s
    Support CPU TDP up to 140W
     
    Cores:
    Up to 22 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    24 DIMM slots
    Up to 6TB 3DS ECC DDR4-2933MHz RDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.26" (438mm)
     
    Depth:
    35.95" (913mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C627 chipset
     
    Network Connectivity:
    Intel® X550 Dual Port 10GBase-T
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    Dual Drawer/Tray with a total of 32 NVMe 2.5" SSDs
     
    Expansion Slots
    PCI-Express:
    2 PCI-E 3.0 x16 Low-profile slots
     
    M.2:
    M.2 Interface: 2 PCI-E 3.0 x2, RAID 0, 1
    M.2 Form Factor: 2260/2280/22110
    M.2 Key: M-Key
     
    Power Supply
    1000 / 1600W 1U Redundant Power Supply
     
    Total Output Power:
    1000W / 1600W
     
    Dimension (W x H x L):
    73.5 x 40 x 185 mm
     
    Input:
    100 -- 127Vac / 13.8A / 47-63Hz
    200 -- 240Vac / 9.6A / 47-63Hz
    200 -- 240Vdc / 8.5A (CCC Only)
     
    +12V:
    Max: 83A / Min: 0A (1000W)
    Max: 132A / Min: 0A (1600W)
     
    12Vsb:
    Max: 2.1A / Min: 0A
     
    Output Type:
    Gold Finger
     
    Certification:
    Platinum Level Certified
     
    Input Output
    LAN:
    2 RJ45 10GBase-T ports
    1 RJ45 Dedicated IPMI LAN port
     
    USB:
    2 USB 3.0 ports (rear)
     
    Video:
    1 VGA port
    Serial Header
    1 COM port (header)
     
    Cooling
    8x 40x56mm PWM fans
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature:
       10°C ~ 30°C (50°F ~ 86°F)
    Non-operating Temperature:
       -40°C to 60°C (-40°F to 140°F)
    Operating Relative Humidity:
       8% to 90% (non-condensing)
    Non-operating Relative Humidity:
       5% to 95% (non-condensing)
     
    Details
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
  • 1029P-WT
    1029P-WT
    $2,549.00
    SKU
    SYS-1029P-WT 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    Dual UPI up to 10.4GT/s
    Support CPU TDP 70-165W
    Cores:
    Up to 28 Cores
     
    Note:
    Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    12 DIMM slots
    Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Width:
    17.2" (437mm)
     
    Height:
    1.7" (43mm)
     
    Depth:
    23.5" (597mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
     
    LEDs:
    Power status LED
    HDD activity LED
    Network activity LEDs
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
     
    Network Controllers:
    Intel® X722 Gigabit Ethernet controller
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Video:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    8x Hot-swap 2.5" SAS/SATA drive bays
     
    Optical Drive
    1x Slim DVD-ROM drive bay (optional)
     
    Expansion Slots
    2x PCI-E 3.0 x16 (FHHL) slots
    1x PCI-E 3.0 x8 (LP) slot
    1x PCI-E 3.0 x16 for Add-on-Module (AOM)
    1x PCI-E M.2 SSD slot
     
    Power Supply
    600W High-Efficiency Power Supply w/PMBus 1.2, I2C, PFC, and Digital Switching
     
    AC Input:
    100-240V, 50-60Hz
     
    DC Output:
    +3.3V: 15A
    +5V: 18A
    +5V standby: 3A
    +12V: 49A
    -12V: 0.5A
     
    Certification:
    Platinum Level
     
    Input Output
    SATA:
    8x SATA3 (6 Gbps) ports
     
    LAN:
    2x RJ45 Gigabit Ethernet ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    4x USB 3.0 ports (rear)
     
    Video:
    1x VGA port
     
    Serial Port / Header:
    1x Fast UART 16550 header
     
    DOM:
    2x SuperDOM (Disk on Module) ports
     
    Cooling
    4x Counter-rotating 4cm PWM fans, 2 fans for cooling AOC
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     

    PC Health Monitoring
     
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029P-WTR
    1029P-WTR
    $2,897.00
    SKU
    SYS-1029P-WTR 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    Dual UPI up to 10.4GT/s
    Support CPU TDP 70-165W
     
    Cores:
    Up to 28 Cores
     
    Note:
    Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    12 DIMM slots
    Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Width:
    17.2" (437mm)
     
    Height:
    1.7" (43mm)
     
    Depth:
    23.5" (597mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
     
    LEDs:
    Power status LED
    HDD activity LED
    Network activity LEDs
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
     
    Network Controllers:
    Intel® X722 Gigabit Ethernet controller
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Video:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    8x Hot-swap 2.5" SAS/SATA drive bays
     
    Optical Drive
    Peripheral:
    1x Slim DVD-ROM drive bay (optional)
     
    Expansion Slots
    2x PCI-E 3.0 x16 (FHHL) slots
    1x PCI-E 3.0 x8 (LP) slot
    1x PCI-E 3.0 x16 for Add-on-Module (AOM)
    1x PCI-E M.2 SSD slot
     
    Power Supply
    700W/750W Redundant Power Supplies with PMBus
    Total Output Power:

    700W/750W
     
    Dimension (W x H x L):
    54.5 x 40 x 320 mm
    Input:
    100 - 140Vac / 8 - 6A / 50-60Hz
    200 - 240Vac / 4.5 - 3.8A / 50-60Hz
    200 - 240Vdc / 4.5 - 3.8A (CCC Only)
     
    +12V:
    Max: 58A / Min: 0.5A (100 - 140Vac)
    Max: 62A / Min: 0.5A (200 - 240Vac)
    Max: 62A / Min: 0.5A (200 - 240Vdc)
    (CB/CCC Only)
     
    +5V sb:
    Max: 3A / Min: 0A
     
    Output Type:
    Gold Finger Connector Mating with Molex 45984-4343
     
    Certification:
    Platinum Level
     
    Input Output
    SATA:
    8x SATA3 (6 Gbps) ports
     
    LAN:
    2x RJ45 Gigabit Ethernet ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    4x USB 3.0 ports (rear)
     
    Video:
    1x VGA port
     
    Serial Port / Header:
    1x Fast UART 16550 header
     
    DOM:
    2x SuperDOM (Disk on Module) ports
     
    Cooling
    4x Counter-rotating 4cm PWM fans, 2x fans for cooling AOC
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
     
    PC Health Monitoring
    CPU:

    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029P-WTRT
    1029P-WTRT
    $3,091.00
    SKU
    SYS-1029P-WTRT 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    Dual UPI up to 10.4GT/s
    Support CPU TDP 70-165W
    Cores:
    Up to 28 Cores
     
    Note:
    Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    12 DIMM slots
    Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Width:
    17.2" (437mm)
     
    Height:
    1.7" (43mm)
     
    Depth:
    23.5" (597mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
     
    LEDs:
    Power status LED
    HDD activity LED
    Network activity LEDs
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C622 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
     
    Network Controllers:
    Intel® X722 10GBase-T Ethernet controller
    Virtual Machine Device Queues reduce I/O overhead
    Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Video:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    8x SATA3 (6Gbps) ports and 2x NVMe/SATA3 hybrid ports (connected to onboard storage controller)
     
    Expansion Slots
    2x PCI-E 3.0 x16 (FHHL) slots
    1x PCI-E 3.0 x8 (LP) slot
    1x PCI-E 3.0 x16 for Add-on-Module (AOM)
    1x PCI-E M.2 SSD slot
     
    Power Supply
    700W/750W Redundant Power Supplies with PMBus
    Total Output Power:

    700W/750W
     
    Dimension (W x H x L):
    54.5 x 40 x 320 mm
    Input:
    100 - 140Vac / 8 - 6A / 50-60Hz
    200 - 240Vac / 4.5 - 3.8A / 50-60Hz
    200 - 240Vdc / 4.5 - 3.8A (CCC Only)
     
    +12V:
    Max: 58A / Min: 0.5A (100 - 140Vac)
    Max: 62A / Min: 0.5A (200 - 240Vac)
    Max: 62A / Min: 0.5A (200 - 240Vdc)
    (CB/CCC Only)
     
    +5V sb:
    Max: 3A / Min: 0A
     
    Output Type:
    Gold Finger Connector Mating with Molex 45984-4343
     
    Certification:
    Platinum Level
     
    Input Output
    SATA:
    8x SATA3 (6 Gbps) ports and 2x NVMe/SATA3 hybrid ports
     
    LAN:
    2x RJ45 10GBase-T ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    6x USB 3.0 ports (4 rear, 2 front via header)
     
    Video:
    1x VGA port
     
    Serial / Header:
    1x Fast UART 16550 header
     
    DOM:
    2x SuperDOM (Disk on Module) ports
     
    Cooling
    4x Counter-rotating 4cm PWM fans, 2 fans for AOC cooling
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
     
    PC Health Monitoring
     
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029U-E1CR25M
    1029U-E1CR25M
    $3,027.00
    SKU
    SYS-1029U-E1CR25M 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    Dual UPI up to 10.4GT/s
    Support CPU TDP 70-205W
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    24 DIMM slots
    Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
    2666 ECC DDR4 NVDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    27.8" (707mm)
     
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
     
    Network Connectivity:
    2 25GbE SFP28 ports via AOC-URN4-M2TS-O (Mellanox ConnectX-4 Lx EN)
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    10x Hot-swap 2.5" drives supported via expander
     
    Expansion Slots
    2x PCI-E 3.0 x16 (Full-height, 10.5" L)
    1x PCI-E 3.0 x8 (Low-profile)
    1x PCI-E 3.0 x16 (internal LP)
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
     
    Power Supply
    750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
     
    AC Input:
    100-127Vac, 50-60Hz
    200-240Vac, 50-60Hz
     
    +12V:
    Max: 62.5A & Min: 0A (100Vac-127Vac)
    Max: 62.5A & Min: 0A (200Vac-240Vac)
     
    12V SB:
    Max: 2.1A
    Min: 0A
     
    Certification:
    Platinum Level Certified
     
    Input Output
    SAS:
    10x SAS3 ports support via expander and storage Add-on Cards
     
    LAN:
    2x 25GbE SFP28 ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    5x USB 3.0 ports
    (2x rear, 2x front, 1x Type A)
     
    Video:
    2x VGA ports (1x rear, 1x onboard)
     
    Serial Port:
    1x Serial header
     
    Cooling
    Fans:
    8x heavy duty fans with optimal fan speed control
     
    Air Shroud:
    1x Air Shroud
     
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature: 
       -40°C to 60°C (-40°F to 140°F)
    Operating Relative Humidity: 
       8% to 90% (non-condensing)
    Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
     
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    Redfish API
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
     
    Power Configurations:
    ACPI Power Management
     
    PC Health Monitoring
     
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029U-E1CR4
    1029U-E1CR4
    $3,448.00
    SKU
    SYS-1029U-E1CR4 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), Dual UPI up to 10.4GT/s
    Support CPU TDP 70-205W
     
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    24 DIMM slots
    Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
    2666 ECC DDR4 NVDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    27.8" (707mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
    Network Connectivity:
    4 Gigabit Ethernet LAN ports via AOC-UR-i4G (Intel® i350)
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    10x Hot-swap 2.5" drives supported via expander
     
    Expansion Slots
    2x PCI-E 3.0 x16 (Full-height, 10.5" L)
    2x PCI-E 3.0 x8 (1 LP, 1 internal LP)
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
     
    Power Supply
    750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
     
    AC Input:
    100-127Vac, 50-60Hz
    200-240Vac, 50-60Hz
     
    +12V:
    Max: 62.5A & Min: 0A (100Vac-127Vac)
    Max: 62.5A & Min: 0A (200Vac-240Vac)
     
    12V SB:
    Max: 2.1A
    Min: 0A
     
    Certification:
    Platinum Level Certified
     
    Input Output
    SAS:
    10x SAS3 ports support via expander and storage Add-on Cards
     
    LAN:
    4x RJ45 GbE LAN ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    5x USB 3.0 ports
    (2x rear, 2x front, 1x Type A)
     
    Video:
    2x VGA ports (1x rear, 1x onboard)
     
    Serial Port:
    1x Serial header
     
    Cooling
    Fans:
    8x heavy duty fans with optimal fan speed control
     
    Air Shroud:
    1x Air Shroud
     
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature: 
       -40°C to 60°C (-40°F to 140°F)
    Operating Relative Humidity: 
       8% to 90% (non-condensing)
    Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
     
     
    Details
    Management
    Software:
    Intel® Node Manager
    Redfish API
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
    Power Configurations:
    ACPI Power Management
     
    PC Health Monitoring
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029U-E1CR4T
    1029U-E1CR4T
    $3,766.00
    SKU
    SYS-1029U-E1CR4T 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),Dual UPI up to 10.4GT/s
    Support CPU TDP 70-205W
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    24 DIMM slots
    Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
    2666 ECC DDR4 NVDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    27.8" (707mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
    Network Connectivity
    4x 10GBase-T ports via AOC-UR-i4XTF (Intel® XL710-B)
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    10x Hot-swap 2.5" drives supported via expander
     
    Expansion Slots
    2x PCI-E 3.0 x16 (Full-height, 10.5" L)
    2x PCI-E 3.0 x8 (1 LP, 1 internal LP)
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
     
    Power Supply
    750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
     
    AC Input:
    100-127Vac, 50-60Hz
    200-240Vac, 50-60Hz
     
    +12V:
    Max: 62.5A & Min: 0A (100Vac-127Vac)
    Max: 62.5A & Min: 0A (200Vac-240Vac)
     
    12V SB:
    Max: 2.1A
    Min: 0A
     
    Certification:
    Platinum Level
     
    Input Output
    SAS:
    10x SAS3 ports support via expander and storage Add-on Cards
     
    LAN:
    4x RJ45 10GBase-T Ethernet ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    5x USB 3.0 ports
    (2x rear, 2x front, 1x Type A)
     
    Video:
    2x VGA ports (1x rear, 1x onboard)
     
    Serial Port:
    1x Serial header
     
    Cooling
    Fans:
    8x Heavy duty fans with optimal fan speed control
     
    Air Shroud:
    1x Air Shroud
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       0°C ~ 50°C (32°F ~ 122°F)
    Non-operating Temperature: 
       -20°C to 60°C (-4°F to 140°F)
    Operating Relative Humidity: 
       10% to 85% (non-condensing)
    Non-operating Relative Humidity: 
       10% to 95% (non-condensing)
     
    Details
    Management
     
    Software:
    Intel® Node Manager
    Redfish API
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
     
    Power Configurations:
    ACPI Power Management
     
    PC Health Monitoring
    CPU:

    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
     
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
     
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
  • 1029U-E1CRT
    1029U-E1CRT
    $3,601.00
    SKU
    SYS-1029U-E1CRT 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),Dual UPI up to 10.4GT/s
    Support CPU TDP 70-205W
     
    Cores:
    Up to 28 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    24 DIMM slots
    Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
    2666 ECC DDR4 NVDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.2" (437mm)
     
    Depth:
    27.8" (707mm)
     
     
    Front Panel
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
     
    Network Connectivity:
    2x 10GBase-T ports via AOC-UR-I2XT (Intel® X540)
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    10x Hot-swap 2.5" drives supported via expander
     
    Expansion Slots
    2x PCI-E 3.0 x16 (Full-height, 10.5" L)
    2x PCI-E 3.0 x8 (1 LP, 1 internal LP)
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
     
     
    Power Supply
    750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
     
    AC Input:
    100-127Vac, 50-60Hz
    200-240Vac, 50-60Hz
     
    +12V:
    Max: 62.5A & Min: 0A (100Vac-127Vac)
    Max: 62.5A & Min: 0A (200Vac-240Vac)
     
    12V SB:
    Max: 2.1A
    Min: 0A
     
    Certification:
    Platinum Level Certified
     
     
    Input Output
    SAS:
    10x SAS3 ports support via expander and storage Add-on Cards
     
    LAN:
    2x RJ45 10GBase-T Ethernet ports
    1x RJ45 Dedicated IPMI LAN port
     
    USB:
    5x USB 3.0 ports
    (2x rear, 2x front, 1x Type A)
     
    Video:
    2x VGA ports (1x rear, 1x onboard)
     
    Serial Port:
    1x Serial header
     
    Cooling
    Fans:
    8x heavy duty fans with optimal fan speed control
     
    Air Shroud:
    1x Air Shroud
     
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature: 
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature: 
       -40°C to 60°C (-40°F to 140°F)
    Operating Relative Humidity: 
       8% to 90% (non-condensing)
    Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
     
    Details
    Management
    Software:
    Intel® Node Manager
    Redfish API
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
    Power Configurations:
    ACPI Power Management
     
    PC Health Monitoring
    CPU:
    Monitors for CPU Cores, Chipset Voltages, Memory.
    4+1 Phase-switching voltage regulator
    FAN:
    Fans with tachometer monitoring
    Status monitor for speed control
    Pulse Width Modulated (PWM) fan connectors
    Temperature:
    Monitoring for CPU and chassis environment
    Thermal Control for 8x fan connectors
     
Refine
Category
Manufacturer
Price Range
Keyword