CALL TODAYLOGINCart(0)$0.00

2U - Intel Xeon Scalable Servers

 
Results For: 2U - Intel Xeon Scalable Servers
  • 2029U-MTNRV-NEBS
    2029U-MTNRV-NEBS
    $9,128.00
    CONFIGURE
    SKU
    2029U-MTNRV-NEBS 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    Intel® Xeon® Gold 6240R Processors (2.4GHZ) integrated for Complete System
    CPU TDP 165W
     
    Memory
    Memory Capacity:
     
    24 DIMM slots
    Up to 1.5TB 3DS ECC DDR4-2933MHz† RDIMM
     
    Memory Type:
    2933†/2666/2400/2133MHz ECC DDR4 RDIMM
    2666 ECC DDR4 NVDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
     
    Chassis
    2U Short Depth Rackmount
     
    Dimensions
    Width
    17.2" (432mm)
     
    Height
    3.5" (89mm)
     
    Depth
    22.6" (574mm)
     
    Front Panel
    Front Bezel:
    2U Front Bezel
    Replaceable UL900-2004 certified air filter
     
    Buttons:
    Power On/Off button
    System Reset button
     
    LEDs:
    Power status LED
    HDD activity LED
    Network activity LEDs
    System information (overheat/UID) LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C621 chipset
     
    SATA:
    SATA3 (6Gbps); RAID 0, 1, 5, 10
     
    Network Connectivity:
    Flexible Networking options
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    6 Hot-swap 2.5" drive bays, 6 NVMe/SATA ports (NVMe from CPU1) or 6 SATA ports; Optional SAS support via SAS storage controller
    Note: SAS3 or NVMe support requires additional optional parts
     
    M.2:
    1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional parts
    2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2
     
    Expansion Slots
    PCI-Express:
    2 PCI-E 3.0 x16 (FH, 10.5"L)
    4 PCI-E 3.0 x8 (FH, 10.5"L)
    1 PCI-E 3.0 x8 (LP)
    1 PCI-E 3.0 x8 (int)
    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
     
    Power Supply
    1600W Redundant Power Supplies with PMBus:
     
    Total Output Power:
    1600W/1000W
     
    Dimension:
    (W x H x L)
    73.5 x 40 x 203 mm
     
    Input:
    100-127Vac / 13 - 9A / 50-60Hz
    200-240Vac / 10 - 8A / 50-60Hz
     
    +12V:
    Max: 83.3A / Min: 0A (100-127Vac)
    Max: 133A / Min: 0A (200-240Vac)
     
    12Vsb:
    Max: 2.1A / Min: 0A
     
    Output Type:
    25 Pairs Gold Finger Connector
     
    Input Output
    SATA:
    6 SATA3 (6Gbps) ports
     
    LAN:
    Flexible LAN options
     
    USB:
    2 USB 3.0 ports (rear)
     
    Video:
    1 VGA Connector
     
    Serial Header:
    1 Serial header
     
    DOM:
    2 SuperDOM (Disk on Module) ports
     
    Cooling
    Fans:
    6 Hot-swap Heavy duty fans with optimal fan speed control
     
    Air Shroud:
    1 Set of Air Shroud
     
    Operating Environment
    RoHS
    RoHS Compliant
     
    Environmental Spec.
     
    Operating Temperature:
       Continuous: 5°C ~ 40°C (41°F ~ 104°F)
       Short term: -5°C ~ 55°C (23°F ~ 131°F)
     
    Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
     
    Operating Relative Humidity:
       5% to 85% with excursion of
       5% to 93% (non-condensing)
     
    Non-operating Relative Humidity:
       5% to 95% (non-condensing)
     
    Details
    Software:
    Intel® Node Manager
    Redfish API
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
     
    Power Configurations:
    ACPI Power Management
     
  • E283-S90-AAD1
    E283-S90-AAD1
    Please Inquire
    CONFIGURE
    SKU
    E283-S90-AAD1 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, CPU TDP up to 350W
    NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported
     
    5th Gen Intel® Xeon®: Up to 5600MHz (1DPC), 4400MHz (2DPC)
    4th Gen Intel® Xeon®: Up to 4800MHz (1DPC), 4400MHz (2DPC)
    Intel® Xeon® Max Series: Up to 4800MHz (1DPC), 4400MHz (2DPC)
     
    Note:
    5600MHz support under 2DPC configuration requires verified memory and BIOS setup.
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 625mm
     
    Onboard Devices
    LAN
    2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
    Support NCSI function
    1 x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Rear side:
    4 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202G:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*
    NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 1600W (240V) 80 PLUS Platinum redundant power supply

    AC Input:
    100-120V~/ 12A, 50-60Hz
    200-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 10A

    DC Output:
    Max 1000W/ 100-120V~
    + 12V/ 81.5A
    + 12Vsb/ 2.5A
    Max 1600W/ 200-240V~ or 240Vdc Input
    + 12V/ 133A
    + 12Vsb/ 2.5A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • E283-S90-AAV1
    E283-S90-AAV1
    Please Inquire
    CONFIGURE
    SKU
    E283-S90-AAV1 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, CPU TDP up to 350W
    Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported

    5th Gen Intel® Xeon®: Up to 5600MHz (1DPC), 4400MHz (2DPC)
    4th Gen Intel® Xeon®: Up to 4800MHz (1DPC), 4400MHz (2DPC)
    Intel® Xeon® Max Series: Up to 4800MHz (1DPC), 4400MHz (2DPC)

    Note: 5600MHz support under 2DPC configuration requires verified memory and BIOS setup.
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 625mm
     
    Onboard Devices
    LAN
    2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
    Support NCSI function
    1 x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Rear side:
    4 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202G:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*

    NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 1600W (240V) 80 PLUS Titanium redundant power supply

    AC Input:
    100-127V~/ 12A, 50-60Hz
    200-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 8A

    DC Output:
    Max 1000W/ 100-127V~
    + 12.2V/ 82A
    + 12Vsb/ 3A
    Max 1600W/ 200-240V~
    + 12.2V/ 132A
    + 12Vsb/ 3A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • EB201-ID
    EB201-ID
    Please Inquire
    CONFIGURE
    SKU
    EB201-ID 
    Processor
    Processor Support:
    Intel® Xeon® 6 processors 6500/6700 series CPU
    Please contact Technical Support for more info/details about optimized CPUs and specialized system
     
    Memory
    DDR5
    6400MHz (1DPC RDIMM)
    8000MHz (1DPC MCR)

    Total 16 memory slots; 8 slots per CPU (1DPC)
    Supports up to 4TB (3DS RDIMM)
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    (W x D x H)
    mm: 438 x 450 x 88
    inches: 17.2 x 17.7 x 3.5
     
    Front Panel
    System power on/off
    System ID
    System reset
    2 x USB 3.0 Type A
     
    LEDs
    Power status
    System alert
    LAN activity
    Drive activity
    System ID
     
    Bios
    BIOS Type:
    AMI / SPI (Serial Peripheral Interface) FLASH interface

    BIOS Features:
    ACPI
    PXE
    WOL
    AC loss recovery
    IPMI 2.0 KCS interface
    SMBIOS
    Serial console redirection
    BIOS boot specification
    BIOS recovery mode
    SRIOV
    TPM
     
    Onboard Devices
    SATA:
    2 x SATA 7-pin connectors with ASM1062R SATA 6Gbps Controller (Supports RAID 0, RAID 1, SPAN)

    IPMI:
    Aspeed AST2600 Advanced PCIe Graphics & Remote Management Processor
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    SMASH support

    Network Controllers:
    2 x 10G Base-T/1GbE RJ45 connectors with Broadcom BCM57416 + BCM5720L co-design

    Graphics:
    Aspeed AST2600 Advanced PCIe Graphics & Remote Management Processor
    PCIe VGA/2D Controller
    1920x1200@60Hz 32bpp
     
    HDD Drive Bays
    External:
    4 x 2.5" hot-swap (SATA/SAS/NVMe)
     
    Expansion Slots
    3 x PCIe X16 slots (HHHL)
     
    Power Supply
    800W 1+1 redundant power supply 80+ Platinum/Titanium
     
    Input Output
    Rear I/O
    LAN: 
    2 x 10G Base-T/1GbE RJ45 connectors with BCM57416/BCM5720L
    1 x dedicated BMC management port with RJ45 connector

    USB: 
    2 x USB 3.0 Type-A connectors

    Video Output: 
    1 x DB-15 VGA connector

    Serial Port:
    1 x COM connector (by Audio Jack)
     
    Cooling
    4x 60x38mm easy swap fans
     
    Operating Environment
    Storage temperature: -10°C(14°F) ~ 60°C(140°F)
    Operating temperature: 0°C(32°F) ~ 35°C(95°F)
    Storage operating humidity: 5%~95% non-condensing
     
    Details
    System Management
    IPMI 2.0
    KVM over IP
    Media redirection
    Temperature, fan, voltage, PSU sensor monitor
    System temperature
    SNMP support
    System ID / System fail indicator
    Remote power on/off/reset
    SEL message alarm through mail
    Intel NM
     
  • EB201-VO
    EB201-VO
    Please Inquire
    CONFIGURE
    SKU
    EB201-VO 
    Processor
    Processor Support:
    Intel® Xeon® 6 processors 6500/6700 series CPU
    Please contact Technical Support for more info/details about optimized CPUs and specialized system
     
    Memory
    DDR5
    6400MHz (1DPC RDIMM)
    8000MHz (1DPC MCR)

    Total 16 memory slots; 8 slots per CPU (1DPC)
    Supports up to 4TB (3DS RDIMM)
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    (W x D x H)
    mm: 438 x 450 x 88
    inches: 17.2 x 17.7 x 3.5
     
    Front Panel
    System power on/off
    System ID
    System reset
    2 x USB 3.0 Type A
     
    LEDs
    Power status
    System alert
    LAN activity
    Drive activity
    System ID
     
    Bios
    BIOS Type:
    AMI / SPI (Serial Peripheral Interface) FLASH interface

    BIOS Features:
    ACPI
    PXE
    WOL
    AC loss recovery
    IPMI 2.0 KCS interface
    SMBIOS
    Serial console redirection
    BIOS boot specification
    BIOS recovery mode
    SRIOV
    TPM
     
    Onboard Devices
    SATA:
    2 x SATA 7-pin connectors with ASM1062R SATA 6Gbps Controller (Supports RAID 0, RAID 1, SPAN)

    IPMI :
    Aspeed AST2600 Advanced PCIe Graphics & Remote Management Processor
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    SMASH support

    Network Controllers:
    2 x 10G Base-T/1GbE RJ45 connectors with Broadcom BCM57416 + BCM5720L co-design

    Graphics:
    Aspeed AST2600 Advanced PCIe Graphics & Remote Management Processor
    PCIe VGA/2D Controller
    1920x1200@60Hz 32bpp
     
    HDD Drive Bays
    External:
    4x 2.5" hot-swap (SATA/SAS/NVMe)
     
    Expansion Slots
    3 x PCIe X16 slots (HHHL)
     
    Power Supply
    800W 1+1 redundant power supply 80+ Platinum/Titanium
     
    Input Output
    Rear I/O
    LAN: 
    2 x 10G Base-T/1GbE RJ45 connectors with BCM57416/BCM5720L
    1 x dedicated BMC management port with RJ45 connector

    USB: 
    2 x USB 3.0 Type-A connectors

    Video Output: 
    1 x DB-15 VGA connector

    Serial Port:
    1 x COM connector (by Audio Jack)
     
    Cooling
    4x 60x38mm easy swap fans
     
    Operating Environment
    Storage temperature: -10°C(14°F) ~ 60°C(140°F)
    Operating temperature: 0°C(32°F) ~ 35°C(95°F)
    Storage operating humidity: 5%~95% non-condensing
     
    Details
    System Management
    IPMI 2.0
    KVM over IP
    Media redirection
    Temperature, fan, voltage, PSU sensor monitor
    System temperature
    SNMP support
    System ID / System fail indicator
    Remote power on/off/reset
    SEL message alarm through mail
    Intel NM
     
  • ESC4000-E10-WOCPU009Z
    ESC4000-E10-WOCPU009Z
    $4,027.00
    CONFIGURE
    SKU
    ESC4000-E10-WOCPU009Z 
    Processor
    2 x Socket P+ (LGA 4189)
    3rd Gen Intel® Xeon® Scalable Processors Family(205W)
     
    Memory
    Total Slots : 16 (8-channel per CPU, 8 DIMM per CPU)
    Capacity : Maximum up to 2048GB RDIMM
    Memory Type :
    DDR4 3200 RDIMM
    DDR4 3200 LRDIMM
    DDR4 3200 LR-DIMM 3DS
    Memory Size :
    128GB, 64GB, 32GB, 16GB
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    800mm x 440mm x 88mm 
    31.50" x 17.22" x 3.5"
     
    Front Panel
    Front Switch/LED:
    1x Power Button/LED
    1x Location Button/LED
    1x Message LED
    1x HDD Access LED
    2x LAN LED
    1x Q-code/port-80 LED
     
    Rear Switch/LED:
    1x Power Button/LED
    1x Location LED
    1x Message LED
    1x HDD Access LED
     
    Onboard Devices
    Networking:
    1x Dual Port Intel I350-AM2 Gigabit LAN controller + 1 x Mgmt LAN
     
    HDD Drive Bays
    8x 3.5" or 2.5" Hot-swap Storage Bays
    (SKU-1 & SKU-2 Backplane Supports 6x SATA/SAS + 2x SATA/SAS/NVMe Devices)
    (SKU-3 Backplane Supports 8x SATA/SAS/NVMe Devices)
    1x M.2 socket (Gen3 x4 link or SATA mode, up to 2280 on-motherboard)
     
    Expansion Slots
    Rear:
    4x PCIe x16 slots (Gen4 x16 link, FH,FL) for dual-slot GPU cards or
    8x PCIe x16 slots (Gen4 x8 link, FH,FL) for single-slot GPU cards
    2x PCIe x16 slots (Gen4 x16 link, LP,HL)

    Front:
    SKU-1 (default)
    1x PCIe x8 slot (Gen4 x8 link, LP,HL)
    4x M.2 sockets (Gen4 x4 link, up to 22110 module)
    SKU-2 (by request)
    1x PCIe x8 slot (Gen4 x8 link, LP,HL)
    1x OCP3.0 slot (Gen4 x16 link)
     
    SKU-3 (by request)
    N/A
     
    Power Supply
    1+1 Redundant 2200W 80 PLUS Platinum Power Supply
    Rating: 100-127Vac/200-240Vac,14A/12.6A,47-63Hz
     
    Input Output
    Front I/O Ports:
    4x USB 3.2 Gen1 ports
     
    Rear I/O Ports:
    2x USB 3.2 Gen1 port
    1x VGA port
    1x Management port (RJ45)
    2x Gigabit LAN ports (RJ45)
     
    Operating Environment
    Operation temperature: 10℃ ~ 35℃ / 
    Non operation temperature: -40℃ ~ 70℃
    Non operation humidity: 20% ~ 90% ( Non condensing)
     
  • HP202-KT
    HP202-KT
    Please Inquire
    CONFIGURE
    SKU
    HP202-KT 
    Processor
    Processor Support:
    5th Gen Intel® Xeon® Scalable Processors (Emerald Rapids)
    4th Gen Intel® Xeon® Scalable Processors (Sapphire Rapids)
    Supports CPU TDP up to 350W
    Please contact Technical Support for more info/details about optimized CPUs and specialized system.

    CPU Interconnection:
    12.8, 14.4, and 16GT/s

    Socket Type:
    Socket E (LGA 4677)
     
    Memory
    (per node)
    DDR5 4800MHz (1DPC); DDR5 5600MHz (1DPC) by Emerald Rapids CPU
    Total 16 memory slots; 8 slots per CPU (1DPC)
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    (W x D x H)
    mm: 438 x 850 x 87
    inches: 17.2 x 33.5 x 3.4
     
    Front Panel
    Front Panel (per node)
    Power on/off button

    LEDs (per node)
    Power LED / Alert LED / UID LED
     
    Bios
    BIOS Type:
    AMI UEFI BIOS

    BIOS Features:
    ACPI
    PXE
    WOL
    AC loss recovery
    BIOS recovery
    IPMI 2.0 KCS mode interface
    SRIOV
    SMBIOS
    TPM
    Serial console redirection
    PCIe hotplug
     
    Onboard Devices
    SATA:
    6 SATA to front edge connectors (SATA 6Gb/s)

    BMC:
    Aspeed AST2600 Advanced PCIe Graphics & Remote Management Processor
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    HTML5
    Redfish
    SMASH Support

    Network Controllers:
    Realtek RTL8211F GbE PHY for dedicated management port
    Intel® i210 GbE NIC for shared management port

    Graphics:
    Aspeed AST2600 Advanced PCIe Graphics & Remote Management Processor
    PCIe Graphic/2D Controller
    1920x1200@60Hz 32bpp
     
    HDD Drive Bays
    External:
    12 x 3.5" hot-swap (3 x drives per node)
    Internal:
    2 x M.2(NGFF)/ M-Key/ 2280/ Support SATA or PCIe 4.0 X4

    Backplane:
    12 x SAS/SATA 12G
     
    Expansion Slots
    2 x PCIe X16 slots (HHHL)
    1 x OCP 3.0 bay (PCIe X16 width)
     
    Power Supply
    3000W 1+1 CRPS 80+ Platinum
     
    Input Output
    Rear I/O
    LAN:
    1 x GbE RJ45 dedicated/shared BMC management

    USB:
    2 x USB 3.2 Gen1 Type A

    Video Output:
    1 x DB15 connector
     
    Cooling
    4 x 80x80mm easy swap fans
     
    Operating Environment
    Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
    Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
    Storage operating humidity : 5%~95% non-condensing
     
  • R263-S33-AAF1
    R263-S33-AAF1
    Please Inquire
    CONFIGURE
    SKU
    R263-S33-AAF1 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Single processor, TDP up to 350W

    Socket
    1 x LGA 4677
    Socket E
     
    Memory
    16 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported

    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

    Note: 5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup. 
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 700mm
     
    Onboard Devices
    LAN
    Rear side:
    1 x 1Gb/s LAN port (1 x Intel® I210-AT)
    Supports NCSI function
    1 x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    12 x 3.5"/2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS201C:
    1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

    Riser Card CRS201D:
    1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

    Riser Card CRS2018:
    1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

    2x OCP 3.0 slots with PCIe Gen5x16 bandwidth, from CPU
    Support NCSI function

    1x M.2 slot:
    M-key
    PCIe Gen3x4, from PCH
    Supports 2280/22110 cards
     
    Power Supply
    Dual 2400W (240V) 80 PLUS Platinum redundant power supply

    AC Input:
    100-127V~/ 12.5A, 47-63Hz
    180-240V~/ 14.5A, 47-63Hz

    DC Input:
    240Vdc/ 12A

    DC Output:
    Max 1000W/ 100-127V~
    + 12V/ 84A
    + 12Vsb/ 3A
    Max 2200W/ 180-200V~
    + 12V/ 180A
    + 12Vsb/ 3.5A
    Max 2400W/ 200-240V~ or 240Vdc
    + 12V/ 197A
    + 12Vsb/ 3.5A

    NOTE:
    1. The system power supply requires C19 power cord
    2. The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.
     
    Input Output
    Internal I/O
    1 x M.2 slot
    1 x TPM header
    1 x VROC connector
    2 x OCP 3.0 mezzanine slots

    Front I/O
    2 x USB 3.2 Gen1
    1 x Power button with LED
    1 x ID button with LED
    1 x NMI button
    1 x Reset button
    1 x LAN activity LED
    1 x HDD activity LED
    1 x System status LED

    Rear I/O
    2 x USB 3.2 Gen1
    1 x Mini-DP
    1 x RJ45
    1 x MLAN
    1 x ID button with LED

    Backplane I/O
    Speed and bandwidth:
    PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • R263-S33-AAL1
    R263-S33-AAL1
    Please Inquire
    CONFIGURE
    SKU
    R263-S33-AAL1 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Single processor, TDP up to 350W

    Socket
    1 x LGA 4677
    Socket E
     
    Memory
    16 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported
     
    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
     
    Note: 5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 700mm
     
    Onboard Devices
    LAN
    Rear side:
    1 x 1Gb/s LAN port (1 x Intel® I210-AT)
    Supports NCSI function
    1 x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    12 x 3.5"/2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS201C:
    1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

    Riser Card CRS201D:
    1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

    Riser Card CRS2018:
    1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

    2x OCP 3.0 slots with PCIe Gen5x16 bandwidth, from CPU
    Support NCSI function

    1x M.2 slot:
    M-key
    PCIe Gen3x4, from PCH
    Supports 2280/22110 cards
     
    Power Supply
    Dual 2700W (240V) 80 PLUS Titanium redundant power supply

    AC Input:
    100-127V~/ 12A, 50-60Hz
    200-240V~/ 16A, 50-60Hz

    DC Input:
    240Vdc/ 16A

    DC Output:
    Max 1008W/ 100-127V~
    + 12V/ 84A
    + 12Vsb/ 3A
    Max 2700W/ 200-240V~
    + 12V/ 225A
    + 12Vsb/ 3A

    NOTE:
    1. The system power supply requires C19 power cord
    2. The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.
     
    Input Output
    Internal I/O
    1x M.2 slot
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    1x LAN activity LED
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    1x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Speed and bandwidth:
    PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • R283-S90-AAE1
    R283-S90-AAE1
    Please Inquire
    CONFIGURE
    SKU
    R283-S90-AAE1 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, TDP up to 350W
    Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported

    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

    Note:5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup. 
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 815mm
     
    Onboard Devices
    LAN
    2x 1Gb/s LAN ports (1x Intel® I350-AM2)
    Support NCSI function
    1x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    4x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
    8x 3.5"/2.5" SATA/SAS hot-swappable bays
    Rear side:
    2x 2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202E:
    2x PCIex16 (Gen5x8) low-profile slots, from CPU_0

    Riser Card CRS202G:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*
    NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 2000W (240V) 80 PLUS Platinum redundant power supply

    AC Input:
    100-120V~/ 12A, 50-60Hz
    180-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 10A

    DC Output:
    Max 1000W/ 100-120V~
    + 12.2V/ 81.5A
    + 12Vsb/ 2.5A
    Max 1600W/ 180-199V~
    + 12.2V/ 131A
    + 12Vsb/ 2.5A
    Max 1800W/ 200-220V~
    + 12.2V/ 147.5A
    + 12Vsb/ 2.5A
    Max 2000W/ 221-240V~
    + 12.2V/ 163.5A
    + 12Vsb/ 2.5A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Front Side Backplane P/N: 9CBP20C5NR-00
    Rear Side Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s on front side
    SATA 6Gb/s or SAS 12Gb/s on rear side
     
    Cooling
    4x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • R283-S90-AAE2
    R283-S90-AAE2
    Please Inquire
    CONFIGURE
    SKU
    R283-S90-AAE2 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, TDP up to 350W
    Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported

    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

    Note: 5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup. 
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 815mm
     
    Onboard Devices
    LAN
    2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
    Support NCSI function
    1 x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    12x 3.5"/2.5" SATA/SAS hot-swappable bays
    Rear side:
    2x 2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202E:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*
    NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

    Riser Card CRS202G:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 2000W (240V) 80 PLUS Platinum redundant power supply

    AC Input:
    100-120V~/ 12A, 50-60Hz
    180-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 10A

    DC Output:
    Max 1000W/ 100-120V~
    + 12.2V/ 81.5A
    + 12Vsb/ 2.5A
    Max 1600W/ 180-199V~
    + 12.2V/ 131A
    + 12Vsb/ 2.5A
    Max 1800W/ 200-220V~
    + 12.2V/ 147.5A
    + 12Vsb/ 2.5A
    Max 2000W/ 221-240V~
    + 12.2V/ 163.5A
    + 12Vsb/ 2.5A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Front Side Backplane P/N: 9CBP20C5NR-00
    Rear Side Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    SATA 6Gb/s or SAS 12Gb/s on front side
    SATA 6Gb/s or SAS 12Gb/s on rear side
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • R283-S90-AAE3
    R283-S90-AAE3
    Please Inquire
    CONFIGURE
    SKU
    R283-S90-AAE3 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, TDP up to 350W
    Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported

    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

    Note:5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup. 
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 815mm
     
    Onboard Devices
    LAN
    2x 1Gb/s LAN ports (1x Intel® I350-AM2)
    Support NCSI function
    1x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    12x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
    Rear side:
    2x 2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202G:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 2000W (240V) 80 PLUS Platinum redundant power supply

    AC Input:
    100-120V~/ 12A, 50-60Hz
    180-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 10A

    DC Output:
    Max 1000W/ 100-120V~
    + 12.2V/ 81.5A
    + 12Vsb/ 2.5A
    Max 1600W/ 180-199V~
    + 12.2V/ 131A
    + 12Vsb/ 2.5A
    Max 1800W/ 200-220V~
    + 12.2V/ 147.5A
    + 12Vsb/ 2.5A
    Max 2000W/ 221-240V~
    + 12.2V/ 163.5A
    + 12Vsb/ 2.5A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Front Side Backplane P/N: 9CBP20C5NR-00
    Rear Side Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s on front side
    SATA 6Gb/s or SAS 12Gb/s on rear side
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • R283-S90-AAJ1
    R283-S90-AAJ1
    Please Inquire
    CONFIGURE
    SKU
    R283-S90-AAJ1 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, TDP up to 350W
    Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported

    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

    Note:5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup. 
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 815mm
     
    Onboard Devices
    LAN
    2x 1Gb/s LAN ports (1x Intel® I350-AM2)
    Support NCSI function
    1x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    4x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
    8x 3.5"/2.5" SATA/SAS hot-swappable bays
    Rear side:
    2x 2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202E:
    2x PCIex16 (Gen5x8) low-profile slots, from CPU_0

    Riser Card CRS202G:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*

    NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 2000W (240V) 80 PLUS Titanium redundant power supply

    AC Input:
    100-127V~/ 13A, 50-60Hz
    200-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 10A

    DC Output:
    Max 1000W/ 100-127V~
    + 12.2V/ 82A
    + 12Vsb/ 3A
    Max 1800W/ 200-220V~
    + 12.2V/ 148A
    + 12Vsb/ 3A
    Max 2000W/ 220-240V~
    + 12.2V/ 164A
    + 12Vsb/ 3A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Front Side Backplane P/N: 9CBP20C5NR-00
    Rear Side Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s on front side
    SATA 6Gb/s or SAS 12Gb/s on rear side
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • R283-S90-AAJ2
    R283-S90-AAJ2
    Please Inquire
    CONFIGURE
    SKU
    R283-S90-AAJ2 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, TDP up to 350W
    Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported

    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

    Note:5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup.
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 815mm
     
    Onboard Devices
    LAN
    2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
    Support NCSI function
    1 x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    12 x 3.5"/2.5" SATA/SAS hot-swappable bays
    Rear side:
    2 x 2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202E:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*

    *NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

    Riser Card CRS202G:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_0

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 2000W (240V) 80 PLUS Titanium redundant power supply

    AC Input:
    100-127V~/ 13A, 50-60Hz
    200-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 10A

    DC Output:
    Max 1000W/ 100-127V~
    + 12.2V/ 82A
    + 12Vsb/ 3A
    Max 1800W/ 200-220V~
    + 12.2V/ 148A
    + 12Vsb/ 3A
    Max 2000W/ 220-240V~
    + 12.2V/ 164A
    + 12Vsb/ 3A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID button with LED

    Backplane I/O
    Front Side Backplane P/N: 9CBP20C5NR-00
    Rear Side Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    SATA 6Gb/s or SAS 12Gb/s on front side
    SATA 6Gb/s or SAS 12Gb/s on rear side
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
  • R283-S90-AAJ3
    R283-S90-AAJ3
    Please Inquire
    CONFIGURE
    SKU
    R283-S90-AAJ3 
    Processor
    5th Generation Intel® Xeon® Scalable Processors
    4th Generation Intel® Xeon® Scalable Processors
    Intel® Xeon® CPU Max Series
    Dual processor, TDP up to 350W
    Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

    Socket
    2 x LGA 4677
    Socket E
     
    Memory
    32 x DIMM slots
    DDR5 memory supported only
    8-Channel memory architecture
    RDIMM modules up to 96GB supported
    3DS RDIMM modules up to 256GB supported
    5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
    4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
    Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

    Note:5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup.
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x 87.5mm x 815mm
     
    Onboard Devices
    LAN
    Rear side:
    2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
    Support NCSI function
    1 x 10/100/1000 management LAN

    Video
    Integrated in Aspeed® AST2600
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Front side:
    12 x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays (8 x from CPU_0, 4 x from CPU_1)
    Rear side:
    2 x 2.5" SATA/SAS hot-swappable bays
    SAS card is required for SAS devices support
     
    Expansion Slots
    Riser Card CRS101J:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS101K:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

    Riser Card CRS202G:
    1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

    Riser Card CRS202H:
    2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
    Supports NCSI function

    1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
    Supports NCSI function
     
    Power Supply
    Dual 2000W (240V) 80 PLUS Titanium redundant power supply

    AC Input:
    100-127V~/ 13A, 50-60Hz
    200-240V~/ 10A, 50-60Hz

    DC Input:
    240Vdc/ 10A

    DC Output:
    Max 1000W/ 100-127V~
    + 12.2V/ 82A
    + 12Vsb/ 3A
    Max 1800W/ 200-220V~
    + 12.2V/ 148A
    + 12Vsb/ 3A
    Max 2000W/ 220-240V~
    + 12.2V/ 164A
    + 12Vsb/ 3A
     
    Input Output
    Internal I/O
    1x TPM header
    1x VROC connector
    2x OCP 3.0 mezzanine slots

    Front I/O
    2x USB 3.2 Gen1
    1x Power button with LED
    1x ID button with LED
    1x NMI button
    1x Reset button
    2x LAN activity LEDs
    1x HDD activity LED
    1x System status LED

    Rear I/O
    2x USB 3.2 Gen1
    1x Mini-DP
    2x RJ45
    1x MLAN
    1x ID LED

    Backplane I/O
    Front side Backplane P/N: 9CBP20C5NR-00
    Rear side Backplane P/N: 9CBP2022NR-00
    Speed and bandwidth:
    PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s on front side
    SATA 6Gb/s or SAS 12Gb/s on rear side
     
    Cooling
    4 x 80x80x38mm (18,300rpm) System Fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management
    Aspeed® AST2600 management controller
    GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

    Dashboard
    HTML5 KVM
    Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
    Sensor Reading History Data
    FRU Information
    SEL Log in Linear Storage / Circular Storage Policy
    Hardware Inventory
    Fan Profile
    System Firewall
    Power Consumption
    Power Control
    LDAP / AD / RADIUS Support
    Backup & Restore Configuration
    Remote BIOS/BMC/CPLD Update
    Event Log Filter
    User Management
    Media Redirection Settings
    PAM Order Settings
    SSL Settings
    SMTP Settings
     
Show More Products ...
Refine
Category
Manufacturer
Price Range
Keyword
Search
 
Copyright © Yang Ming International Corp Visit Full Site