2024US-TRT

Please Inquire

SKU	AS-2024US-TRT

Processor

CPU:
Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
Socket SP3
Supports CPU TDP up to 280W

Cores:
Up to 64 Cores

Chipset:
System on Chip (SoC)

Note:
Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

Memory

Memory Capacity:
32 DIMM slots
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus

Memory Type:
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs

DIMM Sizes:
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB

Memory Voltage:
1.2V

Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount chassis

Dimensions

Height:
3.5" (89mm)
Width:
17.2" (437mm)
Depth:
28.46" (723mm)

Front Panel

Buttons:
Power On/Off button
System Reset button

LEDs:
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Bios	BIOS Type: AMI 128Mb SPI Flash EEPROM BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

Onboard Devices

SATA:
SATA3 (6 Gbps)
Graphics:
ASPEED AST2500 BMC

HDD Drive Bays

Hot-swap:
12 hot-swap 3.5" Drive Bays:
12 SATA3 by default
or 8 SATA3 + 4 NVMe via optional kit
or 12 SAS3 via optional SAS kit

Expansion Slots

2 PCI-E 4.0 x16 (FH, 10.5" L) slots
1 PCI-E 4.0 x16 (FH, 9.5" L) slot
1 PCI-E 4.0 x16 (LP) slot
1 PCI-E 4.0 x8 (FH, 9.5" L, in x16) slot
1 PCI-E 4.0 x8 (internal proprietary LP in x16) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers.)

Power Supply

1600W Redundant Power Supplies with PMBus
Total Output Power:
1600W/1000W

Dimension (W x H x L):
73.5 x 40 x 203 mm

Input:
100-127Vac / 13 - 9A / 50-60Hz
200-240Vac / 10 - 8A / 50-60Hz

+12V:
Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)

12Vsb:
Max: 2.1A / Min: 0A

Output Type:
25 Pairs Gold Finger Connector

Certification:
Titanium Level

Input Output

SATA:
12 SATA3 (6 Gbps) ports

LAN:
Dual 10GBase-T LAN ports via Intel® X710-AT2
1 RJ45 Dedicated IPMI LAN port

USB:
3 USB 3.0 ports (2 rear + 1 Type A)

VGA:
1 VGA port

SAS:
12 SAS3 ports support via optional SAS kit

NVMe:
4 NVMe support via optional tray

Others:
1 COM port (rear)
2 SATA DOM power connector
TPM 1.2 header

Cooling

4 heavy-duty PWM fans with optimal fan speed control

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

Note:
Support for operating 35°C is available in certain system configurations. Contact sales rep or Technical Support for more details.

Details

PC Health Monitoring

CPU:

Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT

CPU switching voltage regulator

FAN:

Up to 8-fan status tachometer monitoring

Up to eight 4-pin fan headers

Status monitor for speed control

Pulse Width Modulated (PWM) fan connectors

Temperature:

Monitoring for CPU and chassis environment

CPU Thermal Trip Support

Thermal control for 8x Fan connectors

I²C Temperature Sensing Logic

LED:

CPU / System Overheat LED

Other Features

Chassis Intrusion Detection

Chassis Intrusion Header

2029U-MTNRV-NEBS

$9,128.00

CONFIGURE

SKU	2029U-MTNRV-NEBS

Processor

CPU:

Dual Socket P (LGA 3647)
Intel® Xeon® Gold 6240R Processors (2.4GHZ) integrated for Complete System
CPU TDP 165W

Memory

Memory Capacity:

24 DIMM slots

Up to 1.5TB 3DS ECC DDR4-2933MHz† RDIMM

Memory Type:

2933†/2666/2400/2133MHz ECC DDR4 RDIMM

2666 ECC DDR4 NVDIMM

Note:

2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro

Chassis

2U Short Depth Rackmount

Dimensions

Width

17.2" (432mm)

Height

3.5" (89mm)

Depth

22.6" (574mm)

Front Panel

Front Bezel:

2U Front Bezel

Replaceable UL900-2004 certified air filter

Buttons:

Power On/Off button

System Reset button

LEDs:

Power status LED

HDD activity LED

Network activity LEDs

System information (overheat/UID) LED

Bios	BIOS Type: AMI 32Mb SPI Flash ROM

Onboard Devices

Chipset:

Intel® C621 chipset

SATA:

SATA3 (6Gbps); RAID 0, 1, 5, 10

Network Connectivity:

Flexible Networking options

Graphics:

ASPEED AST2500 BMC

HDD Drive Bays

Hot-swap:

6 Hot-swap 2.5" drive bays, 6 NVMe/SATA ports (NVMe from CPU1) or 6 SATA ports; Optional SAS support via SAS storage controller

Note: SAS3 or NVMe support requires additional optional parts

M.2:

1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional parts

2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2

Expansion Slots

PCI-Express:

2 PCI-E 3.0 x16 (FH, 10.5"L)

4 PCI-E 3.0 x8 (FH, 10.5"L)

1 PCI-E 3.0 x8 (LP)

1 PCI-E 3.0 x8 (int)

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Power Supply

1600W Redundant Power Supplies with PMBus:

Total Output Power:

1600W/1000W

Dimension:

(W x H x L)

73.5 x 40 x 203 mm

Input:

100-127Vac / 13 - 9A / 50-60Hz

200-240Vac / 10 - 8A / 50-60Hz

+12V:

Max: 83.3A / Min: 0A (100-127Vac)

Max: 133A / Min: 0A (200-240Vac)

12Vsb:

Max: 2.1A / Min: 0A

Output Type:

25 Pairs Gold Finger Connector

Input Output

SATA:

6 SATA3 (6Gbps) ports

LAN:

Flexible LAN options

USB:

2 USB 3.0 ports (rear)

Video:

1 VGA Connector

Serial Header:

1 Serial header

DOM:

2 SuperDOM (Disk on Module) ports

Cooling

Fans:
6 Hot-swap Heavy duty fans with optimal fan speed control

Air Shroud:
1 Set of Air Shroud

Operating Environment

RoHS

RoHS Compliant

Environmental Spec.

Operating Temperature:

Continuous: 5°C ~ 40°C (41°F ~ 104°F)

Short term: -5°C ~ 55°C (23°F ~ 131°F)

Non-operating Temperature:

-40°C to 70°C (-40°F to 158°F)

Operating Relative Humidity:

5% to 85% with excursion of

5% to 93% (non-condensing)

Non-operating Relative Humidity:

5% to 95% (non-condensing)

Details

Software:

Intel® Node Manager

Redfish API

IPMI 2.0

KVM with dedicated LAN

NMI

SSM, SPM, SUM

SuperDoctor® 5

Power Configurations:

ACPI Power Management

2124US-TNRP

Please Inquire

CONFIGURE

SKU	AS-2124US-TNRP

Processor

CPU:
Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
Socket SP3
Supports CPU TDP up to 280W

Cores:
Up to 64 Cores

Chipset:
System on Chip (SoC)

Note:
Certain CPUs with TDP higher than 225W may be supported only under specific conditions. Please contact Technical Support for additional information about specialized system optimization

Memory

Memory Capacity:
32 DIMM slots
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus

Memory Type:
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs

DIMM Sizes:
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB

Memory Voltage:
1.2V

Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (89mm)
Width:
17.2" (437mm)
Depth:
28.46" (723mm)

Front Panel

Buttons:
Power On/Off button
System Reset button

LEDs:
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Bios	BIOS Type: AMI 128Mb SPI Flash EEPROM BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

Onboard Devices

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC

Network Connectivity:
Dual-port 10GBase-T and Dual-port 10G SFP+ via Intel® X710-TM4

VGA:
ASPEED AST2500 BMC

HDD Drive Bays

24 hot-swap 2.5" U.2 NVMe drive bays
Up to 24 SAS/SATA drives supported via optional SAS kit

Expansion Slots

1 PCIe 4.0 x16 slot (FH, 9.5" L)
(Both CPUs need to be installed for full access to PCIe slots and onboard controllers.)

Power Supply

1600W Redundant Power Supplies with PMBus
Total Output Power:
1600W/1000W

Dimension(W x H x L):
73.5 x 40 x 203 mm

Input:
100-127Vac / 13 - 9A / 50-60Hz
200-240Vac / 10 - 8A / 50-60Hz

+12V:
Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)

12Vsb:
Max: 2.1A / Min: 0A

Output Type:
25 Pairs Gold Finger Connector

Certification:
Titanium Level

Input Output

NVMe:
24 U.2 NVMe support

LAN:
Dual 10GBase-T LAN ports
Dual 10G SFP+ LAN ports
1 RJ45 Dedicated IPMI LAN port

USB:
3 USB 3.0 ports (2 rear + 1 Type A)

VGA:
2 VGA ports (1 rear, 1 onboard)

Others:
1 COM port
2 SATA DOM power connectors
TPM 2.0 header

Cooling

Fans:
4 heavy-duty PWM fans with optimal fan speed control

Air Shroud:
1 Air Shroud

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

AS-2025HS-TNR

$6,901.00

CONFIGURE

SKU	AS-2025HS-TNR

Processor

CPU:
Dual Socket SP5
4th Generation AMD EPYC™ 9004 Series Processor
Support CPU TDP up to 360W
Cores:
Up to 192C/384T
Note:
Certain CPUs with high TDP may be supported only under specific conditions. Please contact our Technical Support for additional information about specialized system optimization

Memory

Memory:
Memory Capacity: 24 DIMM slots
Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz
Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory
Note:
For optimal performance AMD recommends full memory population
Memory Voltage:
1.1 V
Error Detection:
Corrects single-bit errors Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (88.9mm)
Width:
17.2" (437mm)
Depth:
31.6" (803mm)

Front Panel

Buttons:
Power On/Off
UID button
LEDs:
HDD activity
LAN1 activity
Power status
System information

Bios	BIOS Type: AMI 256MB SPI Flash BIOS Features: ACPI 6.4 Plug and Play (PnP) SMBIOS 3.5 or later UEFI 2.8 USB Keyboard support

Onboard Devices

Chipset:
System on Chip
Network Connectivity:
Via AIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Hot-swap:
12x 3.5" hot-swap NVMe/SATA/SAS drive bays
M.2:
2x NVMe (PCIe 3.0 x4, Boot drive only)
M-Key, 2280/22110

Expansion Slots

4x (Optional) PCIe 5.0 x16 or x8 FH, 10.5"L slot(s)
4x (Optional) PCIe 5.0 x8 FH, 10.5"L slot(s)

Power Supply

1600W 1U redundant power supply
Dimension (W x H x L):
73.5 x 40 x 265 mm
AC Input:
1000W: 100-127Vac / 12A-9A / 50-60Hz
1600W: 200-240Vac / 9A-7.5A / 50-60Hz
+12V:
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133.3A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 3.5A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

LAN:
1 Dedicated IPMI LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)

Cooling

Fans:
4x 8cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

Operating Environment

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Note:
Operating Temperature based on configurations

AS-2125HS-TNR

$6,964.00

CONFIGURE

SKU	AS-2125HS-TNR

Processor

CPU:
Dual Socket SP5
4th Generation AMD EPYC™ 9004 Series Processor
Support CPU TDP up to 360W
Cores:
Up to 192C/384T
Note:
Certain CPUs with high TDP may be supported only under specific conditions. Please contact our Technical Support for additional information about specialized system optimization

Memory

Memory:
Memory Capacity: 24 DIMM slots
Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz
Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory
Note:
For optimal performance AMD recommends full memory population
Memory Voltage:
1.1 V
Error Detection:
Corrects single-bit errors Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (88.9mm)
Width:
17.2" (437mm)
Depth:
29.9" (760mm)

Front Panel

Buttons:
Power On/Off
UID button
LEDs:
HDD activity
LAN1 activity
Power status
System information

Bios	BIOS Type: AMI 256MB SPI Flash BIOS Features: ACPI 6.4 Plug and Play (PnP) SMBIOS 3.5 or later UEFI 2.8 USB Keyboard support

Onboard Devices

Chipset:
System on Chip
Network Connectivity:
Via AIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Hot-swap:
24x 2.5" hot-swap NVMe/SATA/SAS drive bays
M.2:
2x NVMe (PCIe 3.0 x4, Boot drive only)
M-Key, 2280/22110

Expansion Slots

4 (Optional) PCIe 5.0 x16 or x8 FH, 10.5"L slot(s)
4 (Optional) PCIe 5.0 x8 FH, 10.5"L slot(s)

Power Supply

1600W 1U redundant power supply
Dimension (W x H x L):
73.5 x 40 x 265 mm
AC Input:
1000W: 100-127Vac / 12A-9A / 50-60Hz
1600W: 200-240Vac / 9A-7.5A / 50-60Hz
+12V:
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133.3A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 3.5A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

LAN:
1 Dedicated IPMI LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)

Cooling

Fans:
4x 8cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

Operating Environment

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Note:
Operating Temperature based on configurations

SSG-221E-NE324R

Please Inquire

CONFIGURE

SKU	SSG-221E-NE324R

Processor

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors

Note:
Supports 145W - 350W TDP CPUs (Air Cooled)

Memory

Memory:
Slot Count: 32 DIMM slots
Max Memory (2DPC): Up to 8TB 5600MT/s ECC DDR5 RDIMM/LRDIMM

Memory Voltage:
1.1V

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (89.8 mm)
Width:
17.2" (438.4 mm)
Depth:
30.8" (789.9 mm)

Onboard Devices

Chipset:
Intel® C741

Network Connectivity:
Via AIOM

NVMe

HDD Drive Bays

Drive Bays Configuration:
Default: Total 24 bay(s)
24 front hot-swap E3.S 1T NVMe drive bay(s)

M.2:
2 M.2 NVMe/SATA slot(s) (M-key 2280/22110)

Expansion Slots

PCI-Express (PCIe) Configuration:
Default
4 PCIe 5.0 x8 FHHL slot(s)
2 PCIe 5.0 x16 AIOM slot(s) (OCP 3.0 compatible)
Option A
2 PCIe 5.0 x8 FHHL slot(s)
1 PCIe 5.0 x16 FHHL slot(s)
2 PCIe 5.0 x16 AIOM slot(s) (OCP 3.0 compatible)
Option B
2 PCIe 5.0 x16 FHHL slot(s)
2 PCIe 5.0 x16 AIOM slot(s) (OCP 3.0 compatible)

Power Supply

1x 2000W Redundant Titanium Level power supply
Dimension (WxHxL):
73.5 x 40 x 203 mm

+12V:
Max: 166A / Min: 0A (230Vac-240Vac)

12V SB:
Max: 3.5A

AC Input:
2000W: 230-240Vdc / 50-60Hz (for China only)

Output Type:
Backplanes (gold finger)

Cooling

4 Heavy Duty 8cm Fan(s)

Operating Environment

ROHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 8% to 90% (Non-Condensing)
Non-operating Relative Humidity: 5% to 95% (Non-Condensing)

SYS-220HE-FTNR

Please Inquire

CONFIGURE

SKU	SYS-220HE-FTNR

Processor

Processor
CPU：
Dual Socket P+ (LGA-4189)
3rd Gen Intel® Xeon® Scalable processors
Note：
Supports up to 270W TDP CPUs (Air Cooled)

GPU
Max GPU Count：
Up to 3 double-width or 3 single-width GPU(s)
Supported GPU：
NVIDIA PCIe: T4, A40, A100, A10

CPU-GPU Interconnect：
PCIe 4.0 x16 CPU-to-GPU Interconnect

Memory

Memory:
Slot Count: 32 DIMM slots
Max Memory (2DPC): Up to 8TB 3200MT/s ECC DDR4 RDIMM/LRDIMM

Memory Voltage:
1.2V

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (88.9 mm)
Width:
17.2" (436.88 mm)
Depth:
22.6" (574 mm)

Front Panel

LED:
HDD activity LED
LAN1 activity
LAN2 activity
Power Fail
Power status LED
System information

Buttons:
Power On/Off
UID button

Onboard Devices

SATA:
SATA (6Gbps) ; RAID 0/1/5/10 support

NVMe:
NVMe; RAID 0/1/5/10 support(Intel® VROC RAID key required)

Chipset:
Intel® C621A

Network Connectivity:
2 RJ45 1GbE with Intel® I350-AM2 (optional)
4 SFP 1GbE with Intel® I350-AM4 (optional)
2 RJ45 10GBASE-T with Intel® X550-AT2 (optional)
2 SFP+ 10GbE with Intel® X710-BM2 (optional)
4 SFP+ 10GbE with Intel® XL710-BM1 (optional)
4 SFP+ 10GbE with Intel® X710-TM4 (optional)
2 SFP28 25GbE with Broadcom® BCM57414 (optional)
4 SFP28 25GbE (optional)
2 QSFP28 100GbE with Broadcom® BCM57508 (optional)
4 RJ45 1GbE with Intel® I350-AM4 (optional)

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Drive Bays Configuration:
Default: Total 6 bay(s)
6 front hot-swap 2.5" NVMe/SAS/SATA drive bay(s)

M.2:
2 M.2 NVMe/SATA slot(s) (M-key 2280/22110)

Expansion Slots

Default:
3 PCIe 4.0 x16 FHFL slot(s)
1 PCIe 4.0 x16 FHHL slot(s)
Option A:
6 PCIe 4.0 x8 (in x16) FHFL slot(s)
2 PCIe 4.0 x8 (in x16) FHHL slot(s)

Power Supply

2000W Redundant Titanium (certification pending) Level power supplies

Dimension (WxHxL):
73.5 x 40 x 203 mm

+12V:
Max: 83A (100Vac-127Vac)
Max: 150A (200Vac-220Vac)
Max: 165A (220Vac-230Vac)
Max: 166A (230Vac-240Vac)

12V SB:
Max: 3.5A

AC Input:
1000W: 100-127Vac / 50-60Hz
1800W: 200-220Vac / 50-60Hz
1980W: 220-230Vac / 50-60Hz
2000W: 220-240Vac / 50-60Hz (for UL only)
2000W: 230-240Vac / 50-60Hz
2000W: 230-240Vdc / 50-60Hz (for China only)

Output Type:
Backplanes (gold finger)

Input Output

LAN:
1 RJ45 1 GbE Dedicated BMC LAN port(s)

USB:
2 USB 2.0 port(s) (front)

Video:
1 VGA port(s)

Cooling

6 Counter-rotating, Hot-swappable 60x60x56mm Fan(s)

Operating Environment

Operating Temperature: 5°C ~ 35°C (41°F ~ 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Details

Security
Hardware:
Trusted Platform Module (TPM) 2.0
Silicon Root of Trust (RoT) – NIST 800-193 Compliant
Features:
Cryptographically Signed Firmware
Secure Boot
Secure Firmware Updates
Automatic Firmware Recovery
System Lockdown

PC Health Monitoring
CPU:
Monitors for CPU Cores, Chipset Voltages, Memory
FAN:
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
Thermal Control for fan connectors

SYS-220U-TNR

$6,080.00

CONFIGURE

SKU	SYS-220U-TNR

Processor

Processor
CPU:
Dual Socket P+ (LGA-4189)
3rd Gen Intel® Xeon® Scalable processors
Core Count:
Up to 40C/80T; Up to 60MB Cache per CPU
Note:
Supports up to 270W TDP CPUs (Air Cooled)

GPU
Max GPU Count:
Up to 4 double-width or 6 single-width GPU(s)
Supported GPU:
NVIDIA PCIe: T4, RTX A6000, RTX A5000, A40, A30, A16, A2, A100, A10
View GPU Options
Certification:
NVIDIA CERTIFIED

Memory

Memory:
Slot Count: 32 DIMM slots
Max Memory (2DPC): Up to 8TB 3200MT/s ECC DDR4 RDIMM/LRDIMM
Supports Intel® Optane™ persistent memory 200 series

Memory Voltage:
1.2V

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (89 mm)
Width:
17.2" (437 mm)
Depth:
28.2" (717.2 mm)

Front Panel

LED:
HDD activity
LAN1 activity
LAN2 acticity
Power Fail
Power status
System information (overheat/UID)

Buttons:
Power On/Off
UID button

Bios	BIOS Type: AMI 32MB SPI Flash EEPROM

Onboard Devices

SATA:
SATA (6Gbps) ; RAID 0/1/5/10 support

NVMe:
NVMe; RAID 0/1/5/10 support

Chipset:
Intel® C621A

Network Connectivity:
2 RJ45 10GBASE-T with Intel® X710-AT2 (optional)
2 RJ45 10GBASE-T with Intel® X710-TM4 (optional)
2 SFP+ 10GbE with Intel® X710-TM4 (optional)
No NIC option supported

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Default: Total 24 bay(s)
22 front hot-swap 2.5" NVMe/SAS/SATA drive bay(s)
2 front hot-swap 2.5" SAS*/SATA drive bay(s)
(SAS support may require additional storage controller and/or cables)

Expansion Slots

1 PCIe 4.0 x16 FH/10.5″L slot(s)
5 PCIe 4.0 x8 FH/10.5″L slot(s)
1 PCIe 4.0 x8 LP slot(s)
1 PCIe 4.0 x16 LP slot(s)

Power Supply

1600W Redundant Titanium Level Hot-plug power supplies
Dimension (WxHxL)：
73.5 x 40 x 203 mm

+12V：
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133A / Min: 0A (200Vac-240Vac)

12V SB：
Max: 2.1A / Min: 0A

AC Input：
1000W: 100-127Vac / 50-60Hz
1600W: 200-240Vac / 50-60Hz

Output Type：
Backplanes (gold finger)

Certification：
Titanium Level

Input Output

LAN：
1 RJ45 1 GbE Dedicated BMC LAN port(s)

USB：
2 USB 3.0 port(s) (rear)

Video：
1 VGA port(s)

DOM：
2 SuperDOM (Disk on Module) port(s)

Cooling

Fans：
4x 8cm heavy duty fans with optimal fan speed control
Air Shroud：
2 Air Shroud(s)

Operating Environment

Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Details

Security
Hardware：
Trusted Platform Module (TPM) 2.0
Silicon Root of Trust (RoT) – NIST 800-193 Compliant
Features：
Cryptographically Signed Firmware
Secure Boot
Secure Firmware Updates
Automatic Firmware Recovery
System Lockdown

PC Health Monitoring
CPU：
Monitors for CPU Cores, Chipset Voltages, Memory
7 +1 Phase-switching voltage regulator
FAN：
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature：
Monitoring for CPU and chassis environment
Thermal Control for fan connectors

SYS-221BT-DNC8R

$11,039.00

CONFIGURE

SKU	SYS-221BT-DNC8R

Processor

(per Node)

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
Supports Intel Xeon CPU Max Series with high bandwidth memory (HBM)

Core Count:
Up to 64C/128T; Up to 320MB Cache per CPU

Note:
Supports up to 350W TDP CPUs (Air Cooled)
Supports up to 350W TDP CPUs (Liquid Cooled)

Memory

(per Node)
Memory:
Slot Count: 16 DIMM slots
Max Memory (1DPC): Up to 4TB 5600MT/s ECC DDR5 RDIMM

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.47" (88mm)
Width:
17.68" (449mm)
Depth:
28.75" (730mm)

Front Panel

Buttons:
Power On/Off button
UID button
LEDs:
HDD activity LED
Network activity LEDs
Power status LED
Universal Information (UID) LED

Bios	BIOS Type: AMI 32MB Flash ROM

Onboard Devices

(per Node)
SAS:
SAS3 (12Gbps) via Broadcom® 3816 (IT mode)

Chipset:
Intel® C741

Network Connectivity:
Via AIOM

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

(per Node)
Hot-swap:
12x 2.5" hot-swap NVMe/SAS drive bays (2x PCI-E 5.0 NVMe/SAS and 10x PCI-E 4.0 NVMe/SAS)

M.2:
2 M.2 NVMe

Expansion Slots

(per Node)
PCI-Express (PCIe):
1 PCIe 5.0 x8 LP slot(s)
1 PCIe 5.0 x16 LP slot(s)

Power Supply

2200W Redundant Power Supplies with PMBus
Total Output Power:
2200W : 100 - 240 Vac
2090W : 230 - 240 Vdc for CCC only

Dimension (W x H x L):
45 x 40 x 480 mm

AC Input:
1200W: 100-127Vac / 50-60Hz
2090W: 180-220Vac (for UL/cUL only)
1800W: 200-220Vac / 50-60Hz
1980W: 220-230Vac / 50-60Hz
2200W: 220-240Vac (for UL/cUL only)
2090W: 230-240Vac / 50-60Hz
2090W: 230-240Vdc (for CCC only)

+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)
12V SB:
Max: 2.1A / Min: 0A

Certification:
Titanium Level

Input Output

(per Node)
LAN:
1 RJ45 Dedicated BMC LAN port

USB:
2 USB 3.1 port(s) (2 rear)

Video:
1 VGA port(s)

Others:
2x M.2 for boot drive or caching
M.2 form factor: NVMe double-sided 22x110mm
Note: Enterprise-grade M.2 only for caching application

Cooling

Fans:
4x 16.5K RPM Heavy Duty 8cm Fan(s)
Liquid Cooling:
Direct to Chip (D2C) Cold Plate (optional)

Operating Environment

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (Non-Condensing)
Non-operating Relative Humidity:
5% to 95% (Non-Condensing)

Details

Management
Software:
Supermicro Out of Band (OOB) License (Included per Node)
SuperCloud Composer
SSM
Intel® Node Manager
SPM
KVM with dedicated LAN
IPMI 2.0
SUM
Watch Dog
SuperDoctor® 5
Power Configurations:
ACPI / APM Power Management

SYS-221BT-DNTR

$9,676.00

CONFIGURE

SKU	SYS-221BT-DNTR

Processor

(per Node)

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
Supports Intel Xeon CPU Max Series with high bandwidth memory (HBM)

Core Count:
Up to 64C/128T; Up to 320MB Cache per CPU

Note:
Supports up to 350W TDP CPUs (Air Cooled)
Supports up to 350W TDP CPUs (Liquid Cooled)

Memory

(per Node)
Memory:
Slot Count: 16 DIMM slots
Max Memory (1DPC): Up to 4TB 5600MT/s ECC DDR5 RDIMM

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.47" (88mm)
Width:
17.68" (449mm)
Depth:
28.75" (730mm)

Front Panel

Buttons:
Power On/Off button
UID button

LEDs:
HDD activity LED
Network activity LEDs
Power status LED
Universal Information (UID) LED

Bios	BIOS Type: AMI 32MB Flash ROM

Onboard Devices

(per Node)
Chipset:
Intel® C741

Network Connectivity:
Via AIOM

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

(per Node)
Hot-swap:
12x 2.5" hot-swap NVMe/SATA drive bays (2x PCI-E 5.0 NVMe/SATA and 10x PCI-E 4.0 NVMe/SATA)
M.2:
2 M.2 NVMe

Expansion Slots

(per Node)
PCI-Express (PCIe):
2 PCIe 5.0 x8 LP slot(s)
1 PCIe 5.0 x16 LP slot(s)

Power Supply

2200W Redundant Power Supplies with PMBus
Total Output Power:
2200W : 100 - 240 Vac
2090W : 230 - 240 Vdc for CCC only

Dimension (W x H x L):
45 x 40 x 480 mm

AC Input:
1200W: 100-127Vac / 50-60Hz
2090W: 180-220Vac (for UL/cUL only)
1800W: 200-220Vac / 50-60Hz
1980W: 220-230Vac / 50-60Hz
2200W: 220-240Vac (for UL/cUL only)
2090W: 230-240Vac / 50-60Hz
2090W: 230-240Vdc (for CCC only)

+12V:
Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)

12V SB:
Max: 2.1A / Min: 0A

Certification:
Titanium Level

Input Output

(per Node)
LAN:
1 RJ45 Dedicated BMC LAN port

USB:
2 USB 3.1 port(s) (2 rear)

Video:
1 VGA port(s)

Others:
2x M.2 for boot drive or caching
M.2 form factor: NVMe double-sided 22x110mm
Note: Enterprise-grade M.2 only for caching application

Cooling

Fans:
4x 16.5K RPM Heavy Duty 8cm Fan(s)
Liquid Cooling:
Direct to Chip (D2C) Cold Plate (optional)

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (Non-Condensing)
Non-operating Relative Humidity:
5% to 95% (Non-Condensing)

Details

Management
Software:
Supermicro Out of Band (OOB) License (Included per Node)
SuperCloud Composer
SSM
Intel® Node Manager
SPM
KVM with dedicated LAN
IPMI 2.0
SUM
Watch Dog
SuperDoctor® 5

Power Configurations:
ACPI / APM Power Management

SYS-221BT-HNC8R

$14,506.00

CONFIGURE

SKU	SYS-221BT-HNC8R

Processor

(per Node)

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
Supports Intel Xeon CPU Max Series with high bandwidth memory (HBM)

Core Count:
Up to 64C/128T; Up to 320MB Cache per CPU

Note:
Supports up to 205W TDP CPUs (Air Cooled)
Supports up to 350W TDP CPUs (Liquid Cooled)
Air Cooled CPUs with TDP over 205W only supported under specific conditions.

Memory

(per Node)
Memory:
Slot Count: 16 DIMM slots
Max Memory (1DPC): Up to 4TB 5600MT/s ECC DDR5 RDIMM

Chassis

2U Rackmoun Chassis

Dimensions

Height:
3.47" (88mm)
Width:
17.68" (449mm)
Depth:
28.75" (730mm)

Front Panel

Buttons:
Power On/Off button
UID button

LEDs:
HDD activity LED
Network activity LEDs
Power status LED
Universal Information (UID) LED

Bios	BIOS Type: AMI 32MB Flash ROM

Onboard Devices

(per Node)
SAS:
SAS3 (12Gbps) via Broadcom® 3808 (IT mode)

Chipset:
Intel® C741

Network Connectivity:
Via AIOM

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

(per Node)
Hot-swap:
6x 2.5" hot-swap NVMe/SAS drive bays (2x PCI-E 5.0 NVMe/SAS and 4x PCI-E 4.0 NVMe/SAS)

M.2:
2 M.2 NVMe

Expansion Slots

(per Node)
PCI-Express (PCIe):
2 PCIe 5.0 x16 LP slot(s)

Power Supply

3000W 1U Redundant Power Supply
Total Output Power:
3000W : 208 - 240 Vac
3000W : 240 - 240 Vdc for CQC only

Dimension (W x H x L):
45 x 40 x 480 mm

AC Input:
1400W: 100-127Vac / 50-60Hz
2880W: 200-207Vac / 50-60Hz
3000W: 208-240Vac / 50-60Hz

DC Input:
3000W: 240-240Vdc for CQC only/ 50-60Hz

12V SB:
Max: 4.5A / Min: 0A

Certification:
Titanium Level

Input Output

(per Node)
LAN:
1 RJ45 Dedicated BMC LAN port

USB:
2 USB 3.1 port(s) (2 rear)

Video:
1 VGA port(s)

Others:
2x M.2 for boot drive or caching
M.2 form factor: NVMe double-sided 22x110mm
Note: Enterprise-grade M.2 only for caching application

Cooling

Fans:
4x 16K RPM Counter Rotating 8cm Fan(s)
Liquid Cooling:
Direct to Chip (D2C) Cold Plate (optional)

Operating Environment

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (Non-Condensing)
Non-operating Relative Humidity:
5% to 95% (Non-Condensing)

Details

Management
Software:
Supermicro Out of Band (OOB) License (Included per Node)
SuperCloud Composer
SSM
Intel® Node Manager
SPM
KVM with dedicated LAN
IPMI 2.0
SUM
Watch Dog
SuperDoctor® 5

Power Configurations:
ACPI / APM Power Management

SYS-221BT-HNC9R

$14,304.00

CONFIGURE

SKU	SYS-221BT-HNC9R

Processor

(per Node)

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
Supports Intel Xeon CPU Max Series with high bandwidth memory (HBM)

Core Count:
Up to 64C/128T; Up to 320MB Cache per CPU

Note:
Supports up to 205W TDP CPUs (Air Cooled)
Supports up to 350W TDP CPUs (Liquid Cooled)
Air Cooled CPUs with TDP over 205W only supported under specific conditions.

Memory

(per Node)
Memory:
Slot Count: 16 DIMM slots
Max Memory (1DPC): Up to 4TB 5600MT/s ECC DDR5 RDIMM

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.47" (88mm)
Width:
17.68" (449mm)
Depth:
28.75" (730mm)

Front Panel

Buttons:
Power On/Off button
UID button

LEDs:
HDD activity LED
Network activity LEDs
Power status LED
Universal Information (UID) LED

Bios	BIOS Type: AMI 32MB Flash ROM

Onboard Devices

(per Node)
SAS:
SAS3 (12Gbps) via Broadcom® 3908; RAID 0, 1, 5, 6, 10, 50 support

Chipset:
Intel® C741

Network Connectivity:
Via AIOM

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

(per Node)
Hot-swap:
6x 2.5" hot-swap NVMe/SAS drive bays (2x PCI-E 5.0 NVMe/SAS and 4x PCI-E 4.0 NVMe/SAS)

M.2:
2 M.2 NVMe

Expansion Slots

(per Node)
PCI-Express (PCIe):
1 PCIe 5.0 x16 LP slot(s)

Power Supply

3000W 1U Redundant Power Supply
Total Output Power:
3000W : 208 - 240 Vac
3000W : 240 - 240 Vdc for CQC only

Dimension (W x H x L):
45 x 40 x 480 mm

AC Input:
1400W: 100-127Vac / 50-60Hz
2880W: 200-207Vac / 50-60Hz
3000W: 208-240Vac / 50-60Hz

DC Input:
3000W: 240-240Vdc for CQC only/ 50-60Hz

12V SB:
Max: 4.5A / Min: 0A

Certification:
Titanium Level

Input Output

(per Node)
LAN:
1 RJ45 Dedicated BMC LAN port

USB:
2 USB 3.1 port(s) (2 rear)

Video:
1 VGA port(s)

Others:
2x M.2 for boot drive or caching
M.2 form factor: NVMe double-sided 22x110mm
Note: Enterprise-grade M.2 only for caching application

Cooling

Fans:
4x 16K RPM Counter Rotating 8cm Fan(s)
Liquid Cooling:
Direct to Chip (D2C) Cold Plate (optional)

Operating Environment

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (Non-Condensing)
Non-operating Relative Humidity:
5% to 95% (Non-Condensing)

Details

Management
Software:
Supermicro Out of Band (OOB) License (Included per Node)
SuperCloud Composer
SSM
Intel® Node Manager
SPM
KVM with dedicated LAN
IPMI 2.0
SUM
Watch Dog
SuperDoctor® 5
Power Configurations:
ACPI / APM Power Management

SYS-221BT-HNTR

$12,564.00

CONFIGURE

SKU	SYS-221BT-HNTR

Processor

(per Node)

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
Supports Intel Xeon CPU Max Series with high bandwidth memory (HBM)

Core Count:
Up to 64C/128T; Up to 320MB Cache per CPU

Note:
Supports up to 205W TDP CPUs (Air Cooled)
Supports up to 350W TDP CPUs (Liquid Cooled)
Air Cooled CPUs with TDP over 205W only supported under specific conditions.

Memory

(per Node)
Memory:
Slot Count: 16 DIMM slots
Max Memory (1DPC): Up to 4TB 5600MT/s ECC DDR5 RDIMM

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.47" (88mm)
Width:
17.68" (449mm)
Depth:
28.75" (730mm)

Front Panel

Buttons:
Power On/Off button
UID button
LEDs:
HDD activity LED
Network activity LEDs
Power status LED
Universal Information (UID) LED

Bios	BIOS Type: AMI 32MB Flash ROM

Onboard Devices

(per Node)
Chipset:
Intel® C741

Network Connectivity:
Via AIOM

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

(per Node)
Hot-swap:
6x 2.5" hot-swap NVMe/SATA drive bays (2x PCI-E 5.0 NVMe/SATA and 4x PCI-E 4.0 NVMe/SATA)
M.2:
2 M.2 NVMe

Expansion Slots

(per Node)
PCI-Express (PCIe):
2 PCIe 5.0 x16 LP slot(s)

Power Supply

3000W 1U Redundant Power Supply
Total Output Power:
3000W : 208 - 240 Vac
3000W : 240 - 240 Vdc for CQC only

Dimension (W x H x L):
45 x 40 x 480 mm

AC Input:
1400W: 100-127Vac / 50-60Hz
2880W: 200-207Vac / 50-60Hz
3000W: 208-240Vac / 50-60Hz

DC Input:
3000W: 240-240Vdc for CQC only/ 50-60Hz

12V SB:
Max: 4.5A / Min: 0A

Certification:
Titanium Level

Input Output

(per Node)
LAN:
1 RJ45 Dedicated BMC LAN port

USB:
2 USB 3.1 port(s) (2 rear)

Video:
1 VGA port(s)

Others:
2x M.2 for boot drive or caching
M.2 form factor: NVMe double-sided 22x110mm
Note: Enterprise-grade M.2 only for caching application

Cooling

Fans:
4x 16K RPM Counter Rotating 8cm Fan(s)
Liquid Cooling:
Direct to Chip (D2C) Cold Plate (optional)

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (Non-Condensing)
Non-operating Relative Humidity:
5% to 95% (Non-Condensing)

Details

Management
Software:
Supermicro Out of Band (OOB) License (Included per Node)
SuperCloud Composer
SSM
Intel® Node Manager
SPM
KVM with dedicated LAN
IPMI 2.0
SUM
Watch Dog
SuperDoctor® 5
Power Configurations:
ACPI / APM Power Management

SYS-221GE-NR

Please Inquire

CONFIGURE

SKU	SYS-221GE-NR

Processor

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
Core Count:
Up to 64C/128T; Up to 320MB Cache per CPU
Note:
Supports up to 350W TDP CPUs (Air Cooled)

GPU
Max GPU Count:
Up to 4 double-width GPUs
Supported GPU:
NVIDIA PCIe: H100 NVL, H100, L40S
View GPU Options
CPU-GPU Interconnect:
PCIe 5.0 x16 CPU-to-GPU Interconnect
GPU-GPU Interconnect:
NVIDIA® NVLink® Bridge (optional)

Memory

Memory:
Slot Count: 32 DIMM slots
Max Memory (1DPC): Up to 4TB 5600MT/s ECC DDR5
Max Memory (2DPC): Up to 8TB 4400MT/s ECC DDR5

Memory Voltage:
1.1V

Chassis

2U Rakmount Chassis

Dimensions

Height:
3.46" (88 mm)
Width:
17.25" (438.4 mm)
Depth:
35.43" (900 mm)

Front Panel

LED:
Hard drive activity LED
Network activity LEDs
Power status LED
System Overheat & Power Fail LED

Buttons:
Power On/Off button
System Reset button

Bios	BIOS Type: AMI 32MB SPI Flash EEPROM

Onboard Devices

Chipset:
Intel® C741

Network Connectivity:
1 RJ45 1GbE

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Drive Bays Configuration:
Default: Total 8 bays
8 front hot-swap E1.S NVMe drive bays

M.2:
2 M.2 NVMe/SATA slots (M-key)

Expansion Slots

Default
4 PCIe 5.0 x16 FHFL double-width slots
3 PCIe 5.0 x16 FHFL slots

Power Supply

3x 2000W Redundant Titanium Level (96%) power supplies

Input Output

LAN:
1 RJ45 1 GbE Dedicated BMC LAN port(s)

USB:
2 port(s) (rear)

Video:
1 mini-DP port(s)

Cooling

Fans:
6x 6cm heavy duty fans with optimal fan speed control
Air Shroud:
1 Air Shroud

Operating Environment

Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -30°C to 60°C (-22°F to 140°F)
Operating Relative Humidity: 8% to 80% (max 21° DP; non-condensing)
Non-operating Relative Humidity: 8% to 90% (max 38° DP; non-condensing)

Details

Management
Software:
Redfish API
Supermicro Server Manager (SSM)
Supermicro Power Manager (SPM)
Supermicro SuperDoctor® 5 (SD5)
KVM with dedicated LAN
IPMI 2.0
OOB Management Package (SFT-OOB-LIC )
SMCIPMITool
IPMIView
Power configurations:
Power-on mode for AC power recovery
ACPI Power Management

Security
Hardware:
Trusted Platform Module (TPM) 2.0
Silicon Root of Trust (RoT) – NIST 800-193 Compliant
Features:
Cryptographically Signed Firmware
Secure Boot
Secure Firmware Updates
Automatic Firmware Recovery
Supply Chain Security: Remote Attestation
Runtime BMC Protections
System Lockdown

PC Health Monitoring
CPU:
Monitors for CPU Cores, Chipset Voltages, Memory
8+4 Phase-switching voltage regulator
FAN:
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
Thermal Control for fan connectors

SYS-221H-TN24R

$8,068.00

CONFIGURE

SKU	SYS-221H-TN24R

Processor

CPU:
Dual Socket E (LGA-4677)
5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
Supports Intel Xeon CPU Max Series with high bandwidth memory (HBM)

Core Count:
Up to 64C/128T; Up to 320MB Cache per CPU

Note:
Supports up to 350W TDP CPUs (Air Cooled)
Supports up to 350W TDP CPUs (Liquid Cooled)

Memory

Memory:
Slot Count: 32 DIMM slots
Max Memory (1DPC): Up to 4TB 5600MT/s ECC DDR5 RDIMM
Max Memory (2DPC): Up to 8TB 4400MT/s ECC DDR5 RDIMM

Memory Voltage:
1.1 V

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (88.9mm)
Width:
17.2" (437mm)
Depth:
29.9" (760mm)

Front Panel

Buttons:
Power On/Off
UID button
LEDs:
HDD activity
LAN1 activity
Power
System information

Bios	BIOS Type: AMI 256MB SPI Flash

Onboard Devices

SATA:
SATA3 (6Gbps); RAID 0/1/5/10 support
NVMe:
NVMe; RAID 0/1/5/10 support (Intel® VROC RAID Key required)
Chipset:
Intel® C741
Network Connectivity:
2x 1GbE BaseT with Intel® i350-AM2 (optional)
4x 1GbE BaseT or 4x 1GbE SFP with Intel® i350-AM4 (optional)
2x 10GbE BaseT with Intel® X550-AT2 (optional)
2x 10GbE SFP+ with Intel® X710-BM2 (optional)
4x 10GbE SFP+ with Intel® XL710-BM1 (optional)
4x 10GbE RJ45/SFP+ with Intel® X710-TM4 (optional)
2x 25GbE SFP28 with Broadcom® BCM57414 (optional)
4x 25GbE RJ45/SFP28 with Mellanox® CX-4 Lx EN Intel® X550-AT2 (optional)
2x 100GbE QSFP28 with Broadcom® BCM57508 (optional)
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Hot-swap:
24x 2.5" hot-swap NVMe/SATA/SAS drive bays (NVMe, SATA, or SAS support requires additional parts. Please see the Optional Parts list.)
M.2:
2 M.2 NVMe OR 2 M.2 SATA3
M-Key, 2280/2210

Expansion Slots

PCI-Express (PCIe):
4 (Optional) PCIe 5.0 x16 or x8 FH, 10.5"L slot(s)
4 (Optional) PCIe 5.0 x8 FH, 10.5"L slot(s)
Note:
For 16 NVMe configurations, PCIe slots 1,2 and AIOM slot A2 cannot be used.
For 24 NVMe configurations, PCIe slots 1,2,5,6 and AIOM slot A2 cannot be used.

Power Supply

1600W 1U redundant power supply
Dimension (W x H x L):
73.5 x 40 x 265 mm
AC Input:
1000W: 100-127Vac / 12A-9A / 50-60Hz
1600W: 200-240Vac / 9A-7.5A / 50-60Hz
+12V:
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133.3A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 3.5A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

LAN:
1 RJ45 Dedicated BMC LAN port
USB:
2 USB 2.0 port(s) (2 rear)
Video:
1 VGA port(s)

Cooling

Fans:
4x 8cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)
Liquid Cooling:
Direct to Chip (D2C) Cold Plate (optional)

Operating Environment

Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

Details

Management
Software:
Redfish API
IPMI 2.0
SSM
Intel® Node Manager
SPM
KVM with dedicated LAN
SUM
NMI
Watch Dog
SuperDoctor® 5
Power Configurations:
Power-on mode for AC power recovery
ACPI Power Management

2U - SuperMicro Dual Processor Server

Category

Manufacturer

Price Range

Keyword