2024US-TRT

Please Inquire

SKU	AS-2024US-TRT

Processor

CPU:
Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
Socket SP3
Supports CPU TDP up to 280W

Cores:
Up to 64 Cores

Chipset:
System on Chip (SoC)

Note:
Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

Memory

Memory Capacity:
32 DIMM slots
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus

Memory Type:
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs

DIMM Sizes:
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB

Memory Voltage:
1.2V

Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount chassis

Dimensions

Height:
3.5" (89mm)
Width:
17.2" (437mm)
Depth:
28.46" (723mm)

Front Panel

Buttons:
Power On/Off button
System Reset button

LEDs:
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Bios	BIOS Type: AMI 128Mb SPI Flash EEPROM BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

Onboard Devices

SATA:
SATA3 (6 Gbps)
Graphics:
ASPEED AST2500 BMC

HDD Drive Bays

Hot-swap:
12 hot-swap 3.5" Drive Bays:
12 SATA3 by default
or 8 SATA3 + 4 NVMe via optional kit
or 12 SAS3 via optional SAS kit

Expansion Slots

2 PCI-E 4.0 x16 (FH, 10.5" L) slots
1 PCI-E 4.0 x16 (FH, 9.5" L) slot
1 PCI-E 4.0 x16 (LP) slot
1 PCI-E 4.0 x8 (FH, 9.5" L, in x16) slot
1 PCI-E 4.0 x8 (internal proprietary LP in x16) slot
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers.)

Power Supply

1600W Redundant Power Supplies with PMBus
Total Output Power:
1600W/1000W

Dimension (W x H x L):
73.5 x 40 x 203 mm

Input:
100-127Vac / 13 - 9A / 50-60Hz
200-240Vac / 10 - 8A / 50-60Hz

+12V:
Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)

12Vsb:
Max: 2.1A / Min: 0A

Output Type:
25 Pairs Gold Finger Connector

Certification:
Titanium Level

Input Output

SATA:
12 SATA3 (6 Gbps) ports

LAN:
Dual 10GBase-T LAN ports via Intel® X710-AT2
1 RJ45 Dedicated IPMI LAN port

USB:
3 USB 3.0 ports (2 rear + 1 Type A)

VGA:
1 VGA port

SAS:
12 SAS3 ports support via optional SAS kit

NVMe:
4 NVMe support via optional tray

Others:
1 COM port (rear)
2 SATA DOM power connector
TPM 1.2 header

Cooling

4 heavy-duty PWM fans with optimal fan speed control

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

Note:
Support for operating 35°C is available in certain system configurations. Contact sales rep or Technical Support for more details.

Details

PC Health Monitoring

CPU:

Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT

CPU switching voltage regulator

FAN:

Up to 8-fan status tachometer monitoring

Up to eight 4-pin fan headers

Status monitor for speed control

Pulse Width Modulated (PWM) fan connectors

Temperature:

Monitoring for CPU and chassis environment

CPU Thermal Trip Support

Thermal control for 8x Fan connectors

I²C Temperature Sensing Logic

LED:

CPU / System Overheat LED

Other Features

Chassis Intrusion Detection

Chassis Intrusion Header

2124US-TNRP

Please Inquire

CONFIGURE

SKU	AS-2124US-TNRP

Processor

CPU:
Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
Socket SP3
Supports CPU TDP up to 280W

Cores:
Up to 64 Cores

Chipset:
System on Chip (SoC)

Note:
Certain CPUs with TDP higher than 225W may be supported only under specific conditions. Please contact Technical Support for additional information about specialized system optimization

Memory

Memory Capacity:
32 DIMM slots
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus

Memory Type:
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs

DIMM Sizes:
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB

Memory Voltage:
1.2V

Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (89mm)
Width:
17.2" (437mm)
Depth:
28.46" (723mm)

Front Panel

Buttons:
Power On/Off button
System Reset button

LEDs:
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Bios	BIOS Type: AMI 128Mb SPI Flash EEPROM BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

Onboard Devices

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC

Network Connectivity:
Dual-port 10GBase-T and Dual-port 10G SFP+ via Intel® X710-TM4

VGA:
ASPEED AST2500 BMC

HDD Drive Bays

24 hot-swap 2.5" U.2 NVMe drive bays
Up to 24 SAS/SATA drives supported via optional SAS kit

Expansion Slots

1 PCIe 4.0 x16 slot (FH, 9.5" L)
(Both CPUs need to be installed for full access to PCIe slots and onboard controllers.)

Power Supply

1600W Redundant Power Supplies with PMBus
Total Output Power:
1600W/1000W

Dimension(W x H x L):
73.5 x 40 x 203 mm

Input:
100-127Vac / 13 - 9A / 50-60Hz
200-240Vac / 10 - 8A / 50-60Hz

+12V:
Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)

12Vsb:
Max: 2.1A / Min: 0A

Output Type:
25 Pairs Gold Finger Connector

Certification:
Titanium Level

Input Output

NVMe:
24 U.2 NVMe support

LAN:
Dual 10GBase-T LAN ports
Dual 10G SFP+ LAN ports
1 RJ45 Dedicated IPMI LAN port

USB:
3 USB 3.0 ports (2 rear + 1 Type A)

VGA:
2 VGA ports (1 rear, 1 onboard)

Others:
1 COM port
2 SATA DOM power connectors
TPM 2.0 header

Cooling

Fans:
4 heavy-duty PWM fans with optimal fan speed control

Air Shroud:
1 Air Shroud

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

AS-2025HS-TNR

$7,520.00

CONFIGURE

SKU	AS-2025HS-TNR

Processor

CPU:
Dual Socket SP5
4th Generation AMD EPYC™ 9004 Series Processor
Support CPU TDP up to 360W
Cores:
Up to 192C/384T
Note:
Certain CPUs with high TDP may be supported only under specific conditions. Please contact our Technical Support for additional information about specialized system optimization

Memory

Memory:
Memory Capacity: 24 DIMM slots
Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz
Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory
Note:
For optimal performance AMD recommends full memory population
Memory Voltage:
1.1 V
Error Detection:
Corrects single-bit errors Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (88.9mm)
Width:
17.2" (437mm)
Depth:
31.6" (803mm)

Front Panel

Buttons:
Power On/Off
UID button
LEDs:
HDD activity
LAN1 activity
Power status
System information

Bios	BIOS Type: AMI 256MB SPI Flash BIOS Features: ACPI 6.4 Plug and Play (PnP) SMBIOS 3.5 or later UEFI 2.8 USB Keyboard support

Onboard Devices

Chipset:
System on Chip
Network Connectivity:
Via AIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Hot-swap:
12x 3.5" hot-swap NVMe/SATA/SAS drive bays
M.2:
2x NVMe (PCIe 3.0 x4, Boot drive only)
M-Key, 2280/22110

Expansion Slots

4x (Optional) PCIe 5.0 x16 or x8 FH, 10.5"L slot(s)
4x (Optional) PCIe 5.0 x8 FH, 10.5"L slot(s)

Power Supply

1600W 1U redundant power supply
Dimension (W x H x L):
73.5 x 40 x 265 mm
AC Input:
1000W: 100-127Vac / 12A-9A / 50-60Hz
1600W: 200-240Vac / 9A-7.5A / 50-60Hz
+12V:
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133.3A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 3.5A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

LAN:
1 Dedicated IPMI LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)

Cooling

Fans:
4x 8cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

Operating Environment

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Note:
Operating Temperature based on configurations

AS-2125HS-TNR

$7,777.00

CONFIGURE

SKU	AS-2125HS-TNR

Processor

CPU:
Dual Socket SP5
4th Generation AMD EPYC™ 9004 Series Processor
Support CPU TDP up to 360W
Cores:
Up to 192C/384T
Note:
Certain CPUs with high TDP may be supported only under specific conditions. Please contact our Technical Support for additional information about specialized system optimization

Memory

Memory:
Memory Capacity: 24 DIMM slots
Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz
Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory
Note:
For optimal performance AMD recommends full memory population
Memory Voltage:
1.1 V
Error Detection:
Corrects single-bit errors Detects double-bit errors (using ECC memory)

Chassis

2U Rackmount Chassis

Dimensions

Height:
3.5" (88.9mm)
Width:
17.2" (437mm)
Depth:
29.9" (760mm)

Front Panel

Buttons:
Power On/Off
UID button
LEDs:
HDD activity
LAN1 activity
Power status
System information

Bios	BIOS Type: AMI 256MB SPI Flash BIOS Features: ACPI 6.4 Plug and Play (PnP) SMBIOS 3.5 or later UEFI 2.8 USB Keyboard support

Onboard Devices

Chipset:
System on Chip
Network Connectivity:
Via AIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Hot-swap:
24x 2.5" hot-swap NVMe/SATA/SAS drive bays
M.2:
2x NVMe (PCIe 3.0 x4, Boot drive only)
M-Key, 2280/22110

Expansion Slots

4 (Optional) PCIe 5.0 x16 or x8 FH, 10.5"L slot(s)
4 (Optional) PCIe 5.0 x8 FH, 10.5"L slot(s)

Power Supply

1600W 1U redundant power supply
Dimension (W x H x L):
73.5 x 40 x 265 mm
AC Input:
1000W: 100-127Vac / 12A-9A / 50-60Hz
1600W: 200-240Vac / 9A-7.5A / 50-60Hz
+12V:
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133.3A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 3.5A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

LAN:
1 Dedicated IPMI LAN port
USB:
2 USB 3.0 port(s) (2 rear)
Video:
1 VGA port(s)

Cooling

Fans:
4x 8cm heavy duty fans with optimal fan speed control
Air Shroud:
2 Air Shroud(s)

Operating Environment

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Note:
Operating Temperature based on configurations

E283-S90-AAD1

Please Inquire

CONFIGURE

SKU	E283-S90-AAD1

Processor

5th Generation Intel® Xeon® Scalable Processors
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series
Dual processor, CPU TDP up to 350W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Socket
2 x LGA 4677
Socket E

Memory

32 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported

5th Gen Intel® Xeon®: Up to 5600MHz (1DPC), 4400MHz (2DPC)
4th Gen Intel® Xeon®: Up to 4800MHz (1DPC), 4400MHz (2DPC)
Intel® Xeon® Max Series: Up to 4800MHz (1DPC), 4400MHz (2DPC)

Note:
5600MHz support under 2DPC configuration requires verified memory and BIOS setup.

Chassis

2U Rackmount Chassis

Dimensions

438mm x 87.5mm x 625mm

Onboard Devices

LAN
2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
Support NCSI function
1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

Rear side:
4 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Expansion Slots

Riser Card CRS101J:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

Riser Card CRS101K:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

Riser Card CRS202G:
2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*

NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

Riser Card CRS202H:
2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
Supports NCSI function

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
Supports NCSI function

Power Supply

Dual 1600W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-120V~/ 12A, 50-60Hz
200-240V~/ 10A, 50-60Hz

DC Input:
240Vdc/ 10A

DC Output:
Max 1000W/ 100-120V~
+ 12V/ 81.5A
+ 12Vsb/ 2.5A
Max 1600W/ 200-240V~ or 240Vdc Input
+ 12V/ 133A
+ 12Vsb/ 2.5A

Input Output

Internal I/O
1x TPM header
1x VROC connector
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
2x LAN activity LEDs
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
2x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP2022NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

Cooling

4 x 80x80x38mm (18,300rpm) System Fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

System Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

E283-S90-AAV1

Please Inquire

CONFIGURE

SKU	E283-S90-AAV1

Processor

5th Generation Intel® Xeon® Scalable Processors
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series
Dual processor, CPU TDP up to 350W

Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

Socket
2 x LGA 4677
Socket E

Memory

32 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported

5th Gen Intel® Xeon®: Up to 5600MHz (1DPC), 4400MHz (2DPC)
4th Gen Intel® Xeon®: Up to 4800MHz (1DPC), 4400MHz (2DPC)
Intel® Xeon® Max Series: Up to 4800MHz (1DPC), 4400MHz (2DPC)

Note: 5600MHz support under 2DPC configuration requires verified memory and BIOS setup.

Chassis

2U Rackmount Chassis

Dimensions

438mm x 87.5mm x 625mm

Onboard Devices

LAN
2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
Support NCSI function
1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

Rear side:
4 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Expansion Slots

Riser Card CRS101J:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

Riser Card CRS101K:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

Riser Card CRS202G:
2x PCIex16 (Gen5x16) FHHL slots, from CPU_0*

NOTE: Slot_10 would be downgraded to Gen4 if usingxCC CPU with 4x UPI

Riser Card CRS202H:
2x PCIex16 (Gen5x16) FHHL slots, from CPU_1

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
Supports NCSI function

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
Supports NCSI function

Power Supply

Dual 1600W (240V) 80 PLUS Titanium redundant power supply

AC Input:
100-127V~/ 12A, 50-60Hz
200-240V~/ 10A, 50-60Hz

DC Input:
240Vdc/ 8A

DC Output:
Max 1000W/ 100-127V~
+ 12.2V/ 82A
+ 12Vsb/ 3A
Max 1600W/ 200-240V~
+ 12.2V/ 132A
+ 12Vsb/ 3A

Input Output

Internal I/O
1x TPM header
1x VROC connector
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
2x LAN activity LEDs
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
2x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP2022NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

Cooling

4 x 80x80x38mm (18,300rpm) System Fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

System Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

E283-Z90-AAD1

Please Inquire

CONFIGURE

SKU	E283-Z90-AAD1

Processor

AMD EPYC™ 9004 series processor family
Dual processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 400W

Socket
2 x LGA 6096
Socket SP5

Memory

24 x DIMM slots
DDR5 memory supported only
12-Channel memory architecture per processor
RDIMM modules up to 128GB supported
3DS RDIMM modules up to 256GB supported
Memory speed: Up to 4800 MHz

Chassis

2U Rackmount Chassis

Dimensions

438mm x 87mm x 625mm

Onboard Devices

LAN
2x 1GbE LAN ports (1x Intel® I350-AM2)
Supported NCSI function
1x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

4x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays on rear side
SAS card is required for SAS devices support

Expansion Slots

Riser Card CRS101T:
1x PCIex16 slot (Gen5x16), FHHL from CPU_0

Riser Card CRS101Q:
1x PCIex16 slot (Gen5x16), FHHL from CPU_1

Riser Card CRS202M:
1x PCIex16 slot (Gen5x16), FHHL from CPU_0
1x PCIex16 slot (Gen5x8), FHHL from CPU_0

Riser Card CRS202N:
1x PCIex16 slot (Gen5x16), FHHL from CPU_1
1x PCIex16 slot (Gen5x8), FHHL from CPU_0

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
(1x from CPU_0 and 1x from CPU_1)
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4 from CPU_0
Supports 2280/22110 cards

1x M.2 slot:
M-key
PCIe Gen3x4 from CPU_1
Supports 2280/22110 cards
Occupied by CRS2810. 4x SATA ports

1x M.2 slot:
M-key
PCIe Gen3x2 from CPU_1
Supports 2280/22110 cards

Power Supply

Dual 1600W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-120V~/ 12A, 50-60Hz
200-240V~/ 10A, 50-60Hz

DC Input:
240Vdc/ 10A

DC Output:
Max 1000W/ 100-120V~
+ 12V/ 81.5A
+ 12Vsb/ 2.5A
Max 1600W/ 200-240V~ or 240Vdc Input
+ 12V/ 133A
+ 12Vsb/ 2.5A

Input Output

Internal I/O
3x M.2 slots
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
2x LAN activity LEDs
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
2x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Rear Side Backplane P/N: 9CBP2022NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s on rear side

Cooling

4x 80x80x38mm (18,300rpm) System Fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

System Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

ESC4000-E10-WOCPU009Z

$3,891.00

CONFIGURE

SKU	ESC4000-E10-WOCPU009Z

Processor

2 x Socket P+ (LGA 4189)

3rd Gen Intel® Xeon® Scalable Processors Family(205W)

Memory

Total Slots : 16 (8-channel per CPU, 8 DIMM per CPU)
Capacity : Maximum up to 2048GB RDIMM
Memory Type :
DDR4 3200 RDIMM
DDR4 3200 LRDIMM
DDR4 3200 LR-DIMM 3DS
Memory Size :
128GB, 64GB, 32GB, 16GB

Chassis

2U Rackmount Chassis

Dimensions

800mm x 440mm x 88mm
31.50" x 17.22" x 3.5"

Front Panel

Front Switch/LED:
1x Power Button/LED
1x Location Button/LED
1x Message LED
1x HDD Access LED
2x LAN LED
1x Q-code/port-80 LED

Rear Switch/LED:
1x Power Button/LED
1x Location LED
1x Message LED
1x HDD Access LED

Onboard Devices

Networking:
1x Dual Port Intel I350-AM2 Gigabit LAN controller + 1 x Mgmt LAN

HDD Drive Bays

8x 3.5" or 2.5" Hot-swap Storage Bays
(SKU-1 & SKU-2 Backplane Supports 6x SATA/SAS + 2x SATA/SAS/NVMe Devices)
(SKU-3 Backplane Supports 8x SATA/SAS/NVMe Devices)

1x M.2 socket (Gen3 x4 link or SATA mode, up to 2280 on-motherboard)

Expansion Slots

Rear:
4x PCIe x16 slots (Gen4 x16 link, FH,FL) for dual-slot GPU cards or
8x PCIe x16 slots (Gen4 x8 link, FH,FL) for single-slot GPU cards
2x PCIe x16 slots (Gen4 x16 link, LP,HL)

Front:
SKU-1 (default)
1x PCIe x8 slot (Gen4 x8 link, LP,HL)
4x M.2 sockets (Gen4 x4 link, up to 22110 module)

SKU-2 (by request)
1x PCIe x8 slot (Gen4 x8 link, LP,HL)
1x OCP3.0 slot (Gen4 x16 link)

SKU-3 (by request)
N/A

Power Supply

1+1 Redundant 2200W 80 PLUS Platinum Power Supply
Rating: 100-127Vac/200-240Vac,14A/12.6A,47-63Hz

Input Output

Front I/O Ports:
4x USB 3.2 Gen1 ports

Rear I/O Ports:
2x USB 3.2 Gen1 port
1x VGA port
1x Management port (RJ45)
2x Gigabit LAN ports (RJ45)

Operating Environment

Operation temperature: 10℃ ~ 35℃ /
Non operation temperature: -40℃ ~ 70℃
Non operation humidity: 20% ~ 90% ( Non condensing)

G291-280

$4,073.00

CONFIGURE

SKU

G291-280

Processor

2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 128GB x6 pcs

DCPMM installation locations:
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our technical or sales representative

Chassis

2U Rackmount Chassis

Dimensions

448mm(W) x 87.5mm(H) x 800mm(D)

Onboard Devices

LAN:
2x 10Gb/s BASE-T LAN ports (Intel® X550-AT2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

8x 2.5" hot-swappable HDD/SSD bays

Expansion Slots

8x PCIe x16 slots (Gen3 x16 bus) for GPUs
2x PCIe x16 (Gen3 x16 bus) Half-length low-profile slots
OCP type add-on card in option

System is validated for population with a uniform GPU model
Support is not provided for mixed GPU populations
For the latest GPU cards QVL, please contact your GIGABYTE representative

Power Supply

2x 2200W redundant PSUs
80 PLUS Platinum

AC Input:
100-127V~/ 14A, 47-63Hz
200-240V~/ 12.6A, 47-63Hz

DC Output:
Max 1200W/ 100-127V~
+12.12V/ 95.6A
+12Vsb/ 3.5A
Max 2200W/ 200-240V
+12.12V/ 178.1A
+12Vsb/ 3.5A

Input Output

Internal I/O:
1x 18-pin power connector
1x 14-pin power connector
2x 8-pin power connectors
2x 4-pin power connectors
1x USB 3.0 header
1x USB 2.0 header
1x TPM header
1x HDD back plane board header
1x 12-pin front panel header
1x 23-pin front panel header
1x JTAG header
2x SATA SGPIO headers
1x Front VGA header
1x Serial header
1x IPMB connector
1x P12V standby connector
1x PMBus selection jumper
1x Clear CMOS jumper
1x LT debug jumper
Front I/O:
1x Power button with LED
1x ID button with LED
2x LAN activity LEDs
1x HDD activity LED
1x System status LED
1x Reset button
Rear I/O:
2x USB 3.0
1x VGA
2x RJ45
1x MLAN
1x Power button with LED
1x ID button with LED
1x Reset button
1x NMI button
1x System status LED
Backplane I/O:
8x SAS/SATA ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
SAS card is required for SAS devices support

Cooling

8x 80x80x38mm (15000rpm)

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with SPI interface
Optional TPM2.0 kit: CTM010

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R2520G6

Please Inquire

CONFIGURE

SKU	R2520G6U2BC

Processor

Q'ty / Socket Type:
(2) LGA4710

Supported CPU Series:
Xeon® 6 Processor

Thermal Design Power Wattage:
Max up to 350W* (TDP)

Memory

Supported DIMM Qty:
(16)+(16) DIMM slots

DIMM Type / Speed:
RDIMM / RDIMM-3DS DDR5 6400 MHz (1DPC) / 5200MHz (2DPC) / MRDIMM 8000 (1DPC) -P Core only

Capacity:
Up to 8192GB RDIMM *Follow latest Intel DDR5 Memory POR

Memory channel:
8-Channel DDR5 RDIMM / MRDIMM

Memory voltage:
1.1V

Chassis

2U Rackmount Chassis

Dimensions

Dimension (D x W x H):
30.31" x 17.24" x 3.43"
770mm x 438mm x 87mm

Front Panel

Buttons:
(1) PWR w/ LED / (1) ID w/ LED / (1) RST / (1) NMI

LEDs:
(1) PWR / (1) ID / (1) Drive / (1) System Event

I/O Ports:
(1) USB 2.0 port / (1) USB 3.0 port

Bios	Brand / ROM size: AMI / 64MB Feature: PXE boot support / Console Redirection / SMBIOS 3.6 / ACPI 6.5 / ACPI sleeping states S0, S5 / UEFI Secure Boot / IPMI Boot / Redfish support / PFR Secure Update / HTTP Boot

Onboard Devices

LAN
Q'ty / Port:
(1) GbE dedicated for IPMI
PHY:
Realtek RTL8211F

Storage NVMe
Connector (M.2):
(2) 22110/2280 (by PCIe Gen 4 interface)
Connector (U.2):
(4) SFF-TA-1016 (MCIO 8x) for (8) front NVMe

Graphic
Connector type:
Mini Display Port
Resolution:
Up to 1920x1200
Chipset:
Aspeed AST2600

HDD Drive Bays

Q'ty / Type:
(8) 2.5" Hot-Swap SSDs

Front Drive Bay Interface:
(8) SATA 6Gb/s / SAS 24Gb/s / NVMe U.2

Front Drive Backplane Support:
SAS 24Gb/s /SATA 6Gb/s /NVMe

Notification:
The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact technical support if a discrete SAS HBA/RAID adapter is required.

Expansion Slots

PCIe:
(1) PCIe Gen 5 x16 slot (w/ x8 link in HH/HL) / (2) PCIe Gen 5 x16 slots (FH/HL) / (2) PCIe Gen 5 x16 slots (FH/FL)

Others:
(2) PCIe Gen.5 x16 OCP 3.0 mezzanine slots

Power Supply

Type:
RPSU

Input Range:
AC 100-127V/12A / AC 200-240V/8.5A

Frequency:
50/60 Hz

Output Watts:
1,300 Watts

Efficiency:
80 plus Titanium

Redundancy:
1+1

Notification:
We have additional PSU options available, including 2000W, 2700W, and 3200W.

Input Output

USB：
(1) USB3.0 port / (1) USB UART (on DCSCM)

DisplayPort：
(1) Mini Display Port

RJ-45：
(1) GbE port dedicated for IPMI

Cooling

Fan:
(6) 6056 fans

Operating Environment

Operating Temp.:
10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp.:
- 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating Humidity:
5%~95%, non-condensing

Details

TPM (Optional)

TPM Support:

TM-TPM2-MS-I-9672

Interface:

SPI

System Monitoring

Chipset:

Aspeed AST2600

Temperature:

Monitors temperature for CPU & memory & system environment

Voltage Monitors voltage for CPU, memory, chipset & power supply

LED:

Over temperature warning indicator / Fan & PSU fail LED indicator

Server Management

Onboard Chipset:

Onboard Aspeed AST2600 (on DCSCM module)

AST2600 iKVM Feature:

24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub

AST2600 IPMI Feature IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface

R2520G6-U2XD

Please Inquire

CONFIGURE

SKU	R2520G6U2XD

Processor

Q'ty / Socket Type:
(2) LGA4710

Supported CPU Series:
Xeon® 6 Processor

Thermal Design Power Wattage:
Max up to 350W (TDP)

Memory

Supported DIMM Qty:
(16)+(16) DIMM slots

DIMM Type / Speed:
RDIMM / RDIMM-3DS DDR5 6400 MHz (1DPC) / 5200MHz (2DPC) / MRDIMM 8000 (1DPC) -P Core only

Capacity:
Up to 8192GB RDIMM *Follow latest Intel DDR5 Memory POR

Memory channel:
8-Channel DDR5 RDIMM / MRDIMM

Memory voltage:
1.1V

Chassis

2U Rackmount Chassis

Dimensions

Dimension (D x W x H):
30.31" x 17.24" x 3.43"
770mm x 438mm x 87mm

Front Panel

Buttons:
(1) PWR w/ LED / (1) ID w/ LED / (1) RST / (1) NMI

LEDs:
(1) PWR / (1) ID / (1) Drive / (1) System Event

I/O Ports:
(1) USB 2.0 port / (1) USB 3.0 port

Bios	Brand / ROM size: AMI / 64MB Feature: PXE boot support / Console Redirection / SMBIOS 3.6 / ACPI 6.5 / ACPI sleeping states S0, S5 / UEFI Secure Boot / IPMI Boot / Redfish support / PFR Secure Update / HTTP Boot

Onboard Devices

LAN
Q'ty / Port:
(1) GbE dedicated for IPMI
PHY:
Realtek RTL8211F

Storage NVMe
Connector (M.2):
(2) 22110/2280 (by PCIe Gen 4 interface)
Connector (U.2):
(12) SFF-TA-1016 (MCIO 8x) for (24) front NVMe

Graphic
Connector type:
Mini Display Port
Resolution:
Up to 1920x1200
Chipset:
Aspeed AST2600

HDD Drive Bays

Q'ty / Type:
(24) 2.5" Hot-Swap SSDs

Front Drive Bay Interface:
(24) SATA 6Gb/s / SAS 24Gb/s / NVMe U.2

Front Drive Backplane Support:
SAS 24Gb/s /SATA 6Gb/s /NVMe

Notification:
The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact technical support if a discrete SAS HBA/RAID adapter is required.

Expansion Slots

PCIe:
(1) PCIe Gen 5 x16 slot (w/ x8 link in HH/HL) / (2) PCIe Gen 5 x16 slots (FH/HL) / (2) PCIe Gen 5 x16 slots for (2) Retimer Cards (AXXG5X16RTM)

Others:
(2) PCIe Gen.5 x16 OCP 3.0 mezzanine slots

Power Supply

Type:
RPSU

Input Range:
AC 100-127V/12A / AC 200-240V/ 10A

Frequency:
50/60 Hz

Output Watts:
2,000 Watts

Efficiency:
80 plus Titanium

Redundancy:
1+1

Notification:
We have additional PSU options available, including 1300W, 2700W, and 3200W.

Input Output

USB:
(1) USB3.0 port / (1) USB UART (on DCSCM)

DisplayPort:
(1) Mini Display Port

RJ-45:
(1) GbE port dedicated for IPMI

Cooling

Fan:
(6) 6056 fans

Operating Environment

Operating Temp.:
10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp.:
- 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating Humidity:
5%~95%, non-condensing

Details

TPM (Optional)

TPM Support:

TM-TPM2-MS-I-9672

Interface:

SPI

System Monitoring

Chipset Aspeed AST2600

Temperature:

Monitors temperature for CPU & memory & system environment

Voltage:

Monitors voltage for CPU, memory, chipset & power supply

LED:

Over temperature warning indicator / Fan & PSU fail LED indicator

Server Management

Onboard Chipset:

Onboard Aspeed AST2600 (on DCSCM module)

AST2600 iKVM Feature:

24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub

AST2600 IPMI Feature IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface

R281-2O0

$2,665.00

CONFIGURE

SKU

R281-2O0

Processor

2 x LGA 3647
2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our technical or sales representative

Chassis

2U Rackmount Chassis

Dimensions

438mm(W) x 87.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

Front side:
24x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side:
2x 2.5" SATA/SAS hot-swappable HDD/SSD bays
SAS card is required to enable the drive bays
SATA:
1x 7-pin SATA III 6Gb/s with SATA DOM supported
SAS:
Supported via add-on SAS Card
RAID:
Depends on RAID card

Expansion Slots

Riser Card CRS2131:
1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2132:
1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2124:
1x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length
1x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length

2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3

Power Supply

2x 1200W redundant PSUs
80 PLUS Platinum
AC Input:
100-240V~/ 12-7A, 50-60Hz
DC Input:
240Vdc/ 6A
DC Output:
Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A

Input Output

Internal I/O:
2x Power supply connectors
4x SlimSAS connectors
2x SATA 7-pin connectors
2x CPU fan headers
1x USB 3.0 header
1x TPM header
1x VROC connector
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Front I/O:
2x USB 3.0
1x Power button with LED
1x ID button with LED
1x Reset button
1x NMI button
1x System status LED
1x HDD activity LED
2x LAN activity LEDs
Rear I/O:
2x USB 3.0
1x VGA
1x COM (RJ45 type)
2x RJ45
1x MLAN
1x ID button with LED
Backplane I/O:
Front side_CBP20O2: 24x SATA/SAS ports
Rear side_CBP2020: 2x SATA/SAS ports
LSI SAS35x36 expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
0x SAS/SATA drives
SAS card required to enable the drive bays

Cooling

4x 80x80x38mm (14'900rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R281-3C0

$2,413.00

CONFIGURE

SKU

R281-3C0

Processor

CPU:
2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Socket:
2 x LGA 3647
Socket P

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our technical or sales representative

Chassis

2U Rackmount Chassis

Dimensions

438mm(W) x 87.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

Front side:

12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
2.5" HDD/SSD supported
Rear side:

2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
SAS:
Supported via add-on SAS Card
RAID:
Intel® SATA RAID 0/1/10/5

Expansion Slots

Riser Card CRS2131:
1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2132:
1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2124:
1x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length
1x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length

2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3

Power Supply

2x 1200W redundant PSUs
80 PLUS Platinum
AC Input:
100-240V~/ 12-7A, 50-60Hz
DC Input:
240Vdc/ 6A
DC Output:
Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A

Input Output

Internal I/O:
2x Power supply connectors
4x SlimSAS connectors
2x SATA 7-pin connectors
2x CPU fan headers
1x USB 3.0 header
1 TPM header
1x VROC connector
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Front I/O:
2x USB 3.0
1x Power button with LED
1x ID button with LED
1x Reset button
1x NMI button
1x System status LED
1x HDD activity LED
2x LAN activity LEDs
Rear I/O:
2x USB 3.0
1x VGA
1x COM (RJ45 type)
2x RJ45
1x MLAN
1x ID button with LED
Backplane I/O:
Front side_CBP20C3: 12x SATA/SAS ports
Rear side_CBP2020: 2x SATA/SAS ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
SAS card is required for SAS devices support

Cooling

4x 80x80x38mm (14'900rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R281-G30

$3,348.00

CONFIGURE

SKU

R281-G30

Processor

CPU:
2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Socket:
2 x LGA 3647
Socket P

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our technical or sales representative

Chassis

2U Rackmount Chassis

Dimensions

438mm(W) x 87.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

24x 2.5" SATA/SAS hot-swappable HDD/SSD bays
SAS card is required to enable the drive bays
SATA:
1x 7-pin SATA III 6Gb/s with SATA DOM supported
SAS:
Supported via add-on SAS Card
RAID:
Depends on RAID card

Expansion Slots

Riser Card CRS2131:
1x PCIe x16 slot (Gen3 x16 or x8),Full height full-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length
Riser Card CRS2132:
1x PCIe x16 slot (Gen3 x16 or x8),Full height full-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length
Riser Card CRS2123:
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x16 slot (Gen3 x16 or x8),Full height full-length
2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3
System is validated for population with a uniform GPU model
Support is not provided for mixed GPU populations
For the latest QVL, please contact your GIGABYTE representative

Power Supply

2x 2000W redundant PSUs
80 PLUS Platinum
AC Input:
100-127V~/ 12.5A, 50-60Hz
200-240V~/ 12.5A, 50-60Hz
DC Output:
Max 1008W/ 100-127V~
+12V/ 84A
+12Vsb/ 2A
Max 2004W/ 200-240V
+12V/ 167A
+12Vsb/ 2A

Input Output

Internal I/O:
2x Power supply connectors
4x SlimSAS connectors
2x SATA 7-pin connectors
2x CPU fan headers
1x USB 3.0 header
1x TPM header
1x VROC connector
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Front I/O:
2x USB 3.0
1x Power button with LED
1x ID button with LED
1x Reset button
1x NMI button
1x System status LED
1x HDD activity LED
2x LAN activity LEDs
Rear I/O:
2x USB 3.0
1x VGA
1x COM (RJ45 type)
2x RJ45
1x MLAN
1x ID button with LED
Backplane I/O:
Front side_CBP20O2: 24x SATA/SAS ports
LSI SAS3x36 expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
0x SAS/SATA drives
SAS card required to enable the drive bays

Cooling

4x 80x80x38mm (14'900rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R281-N40

$3,100.00

CONFIGURE

SKU

R281-N40

Processor

CPU:
2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Socket:
2 x LGA 3647
Socket P

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our technical or sales representative

Chassis

2U Rackmount Chassis

Dimensions

438mm(W) x 87.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

Front side:
4x 2.5" U.2, 20x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side:
2x 2.5" SATA/SAS hot-swappable HDD/SSD bays
SAS card is required to enable the drive bays
SATA:
1x 7-pin SATA III 6Gb/s with SATA DOM supported
SAS:
Supported via add-on SAS Card
RAID:
For SATA/SAS drives:
Depends on RAID card
For U.2 drives:
Intel® Virtual RAID On CPU (VROC) RAID 0, 1, 5
Note: VROC module is for Intel®SSD only

Expansion Slots

Riser Card CRS2131:
1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2132:
1x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
1x PCIe x8 slots (Gen3 x8), Full height half-length

Riser Card CRS2124:
1x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length
1x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length

2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3
1x OCP mezzanine slot is Occupied by CNVO124, 4x U.2 mezzanine card

Power Supply

2x 1200W redundant PSUs
80 PLUS Platinum
AC Input:
100-240V~/ 12-7A, 50-60Hz
DC Input:
240Vdc/ 6A
DC Output:
Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A

Input Output

Internal I/O:
2x Power supply connectors
4x SlimSAS connectors
2x SATA 7-pin connectors
2x CPU fan headers
1x USB 3.0 header
1x TPM header
1x VROC connector
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Front I/O:
2x USB 3.0
1x Power button with LED
1x ID button with LED
1x Reset button
1x NMI button
1x System status LED
1x HDD activity LED
2x LAN activity LEDs
Rear I/O:
2x USB 3.0
1x VGA
1x COM (RJ45 type)
2x RJ45
1x MLAN
1x ID button with LED
Backplane I/O:
Front side_CBP20O2: 24x SATA/SAS ports
Front side_CEPM080: 4x U.2 ports
Rear side_CBP2020: 2x SATA/SAS ports
LSI SAS35x36 expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
4x U.2, 0x SAS/SATA drives
SAS card required to enable the drive bays

Cooling

4x 80x80x38mm (14'900rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

2U - Enterprise Server (Dual CPU)

Category

Manufacturer

Price Range

Keyword