2U - Entry Level Servers (Single-CPU)

CPU:
Single processor(s)
AMD EPYC™ 8004 Series Processor
Core Count:
Up to 64C/128T
Note:
Supports up to 225W TDP CPUs (Air Cooled)

GPU
Max GPU Count:
Up to 1 double-width or 2 single-width GPUs
Supported GPU:
NVIDIA PCIe: T400, RTX 4000 Ada Generation

Memory:
Slot Count: 6 DIMM slots
Max Memory (1DPC): Up to 576GB 4800MT/s ECC DDR5 RDIMM

Memory Voltage:
1.1V

LED:
Device Activity
LAN 1 Activity
LAN 2 Activity
Power Failure LED
Power status
System information

Buttons:
Power On/Off 
System Reset

BIOS Type:
AMI 32MB SPI Flash EEPROM

BIOS Features:
ACPI 6.4
Plug and Play (PnP)
SMBIOS 3.5 or later
UEFI 2.8
USB Keyboard support

Chipset:
System on Chip

Network Connectivity:
2 RJ45 10GBASE-T with Broadcom® BCM57416

Drive Bays Configuration:
Default: Total 12 bays
12 front hot-swap 3.5" SATA drive bays
Option A: Total 12 bays
6 front hot-swap 3.5"/2.5" PCIe 5.0 NVMe/SATA drive bays
6 front hot-swap 3.5"/2.5" SATA drive bays
Option B: Total 12 bays
12 front hot-swap 2.5" SAS drive bays
(NVMe/SAS support may require additional storage controller and/or cables, please see the optional parts list for details)

M.2:
2 M.2 PCIe 3.0 x4 NVMe slots (M-key 2280/22110)

PCI-Express (PCIe) Configuration:
Default
2 PCIe 5.0 x16 FHFL slots
2 PCIe 5.0 x8 LP slots

M.2:
2 M.2 PCIe 4.0 x4 NVMe slots (M-key)

2x 800W Redundant Titanium Level (96%) power supplies
Dimension (WxHxL):
76 x 40 x 336 mm

Input:
800W: 100-240Vac / 50-60Hz
800W: 200-240Vdc / 50-60Hz

+12V:
Max: 66A / Min: 0A (100Vac-240Vac)
Max: 66A / Min: 0A (200Vdc-240Vdc)

5V SB:
Max: 4A / Min: 0A

Output Type:
Backplanes (gold finger)

LAN:
1 RJ45 1 GbE Dedicated BMC LAN port
2 RJ45 10 GBASE-T LAN ports

USB:
4 ports(rear)

Video:
1 VGA port

Serial:
1 COM port(Rear)

TPM:
1 TPM Onboard/port 80

CPU:
Single Socket SP5
AMD EPYC™ 9004 Series Processors

Core Count:
Up to 84C/168T; Up to 384MB Cache

Note:
Supports 200W - 290W TDP CPUs (Air Cooled)

Memory:
Slot Count: 12 DIMM slots
Max Memory (2DPC): Up to 3TB 4800MT/s ECC DDR5 RDIMM/LRDIMM

Memory Voltage:
1.1V

LED:
Network activity
Power status
SSD activity
System information (overheat/UID) 

Buttons:
Power On/Off 

Chipset:
System on Chip
Network Connectivity:
Via AIOM

NVMe

Drive Bays Configuration:
Default: Total 26 bay(s)
12 front hot-swap 3.5" SAS/SATA drive bay(s)
12 top-loading hot-swap 3.5" SAS/SATA drive bay(s)
2 rear hot-swap 2.5" SATA drive bay(s)
Option A: Total 28 bay(s)
12 front hot-swap 3.5" SAS/SATA drive bay(s)
12 top-loading fixed 3.5" SAS/SATA drive bay(s)
2 rear hot-swap 2.5" SATA drive bay(s)
2 rear hot-swap 2.5" NVMe drive bay(s)
Option B: Total 30 bay(s)
12 front hot-swap 3.5" SAS/SATA drive bay(s)
12 top-loading hot-swap 3.5" SAS/SATA drive bay(s)
4 rear hot-swap 2.5" NVMe drive bay(s)
2 rear hot-swap 2.5" SATA drive bay(s)

M.2:
2 M.2 NVMe slot(s) (M-key 2280/22110)

1x 1600W Redundant Titanium Level power supply
Dimension (WxHxL):
73.5 x 40 x 203 mm

+12V:
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133A / Min: 0A (200Vac-240Vac)

12V SB:
Max: 2.1A / Min: 0A

AC Input:
1000W: 100-127Vac / 50-60Hz
1600W: 200-240Vac / 50-60Hz

Output Type:
Backplanes (gold finger)

LAN:
1 RJ45 1 GbE Dedicated IPMI LAN port(s)

USB:
2 USB 3.0 port(s) (rear)

Video:
1 VGA port(s)

ROHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 8% to 90% (Non-Condensing)
Non-operating Relative Humidity: 5% to 95% (Non-Condensing)

CPU:
Single Socket SP5
AMD EPYC™ 9004 Series Processors

Core Count:
Up to 84C/168T; Up to 384MB Cache

Note:
Supports 200W - 290W TDP CPUs (Air Cooled)

Memory:
Slot Count: 12 DIMM slots
Max Memory (2DPC): Up to 3TB 4800MT/s ECC DDR5 RDIMM/LRDIMM

Memory Voltage:
1.1V

LED:
Network activity
Power status
SSD activity
System information (overheat/UID) 

Buttons:
Power On/Off 

Chipset:
System on Chip

Network Connectivity:
Via AIOM

NVMe

Drive Bays Configuration:
Default: Total 26 bay(s)
12 front hot-swap 3.5" SAS/SATA drive bay(s)
12 top-loading hot-swap 3.5" SAS/SATA drive bay(s)
2 rear hot-swap 2.5" SATA drive bay(s)
Option A: Total 28 bay(s)
12 front hot-swap 3.5" SAS/SATA drive bay(s)
12 top-loading hot-swap 3.5" SAS/SATA drive bay(s)
2 rear hot-swap 2.5" SATA drive bay(s)
2 rear hot-swap 2.5" NVMe drive bay(s)
Option B: Total 30 bay(s)
12 front hot-swap 3.5" SAS/SATA drive bay(s)
12 top-loading hot-swap 3.5" SAS/SATA drive bay(s)
4 rear hot-swap 2.5" NVMe drive bay(s)
2 rear hot-swap 2.5" SATA drive bay(s)

M.2:
2 M.2 NVMe slot(s) (M-key 2280/22110)

1x 1600W Redundant Titanium Level power supply
Dimension (WxHxL):
73.5 x 40 x 203 mm

+12V:
Max: 83.3A / Min: 0A (100Vac-127Vac)
Max: 133A / Min: 0A (200Vac-240Vac)

12V SB:
Max: 2.1A / Min: 0A

AC Input:
1000W: 100-127Vac / 50-60Hz
1600W: 200-240Vac / 50-60Hz

Output Type:
Backplanes (gold finger)

LAN:
1 RJ45 1 GbE Dedicated IPMI LAN port(s)

USB:
2 USB 3.0 port(s) (rear)

Video:
1 VGA port(s)

ROHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 8% to 90% (Non-Condensing)
Non-operating Relative Humidity: 5% to 95% (Non-Condensing)

CPU:
Single Socket SP5
AMD EPYC™ 9004 Series Processors

Note:
Supports 200W - 360W TDP CPUs (Air Cooled)

Memory:
Slot Count: 24 DIMM slots
Max Memory (1DPC): Up to 4TB 4800MT/s ECC DDR5 RDIMM/LRDIMM
Max Memory (2DPC): Up to 6TB 4800MT/s ECC DDR5 RDIMM/LRDIMM

Memory Voltage:
1.1V

Chipset:
AMD System on Chip

Network Connectivity:
Via AIOM

Drive Bays Configuration:
Default: Total 34 bay(s)
32 front hot-swap E3.S 1T NVMe drive bay(s)
2 rear hot-swap 2.5" SATA drive bay(s)

M.2:
2 M.2 NVMe slot(s) (M-key 2280/22110)

PCI-Express (PCIe) Configuration:
Default
2 PCIe 5.0 x16 FHHL slot(s)
2 PCIe 5.0 x16 AIOM slot(s) (OCP 3.0 compatible)

M.2:
2 M.2 PCIe 3.0 x2 NVMe slot(s) (M-key 2280/22110)

1x 2000W Redundant Titanium Level power supply
Dimension (WxHxL):
73.5 x 40 x 203 mm

+12V:
Max: 166A / Min: 0A (230Vac-240Vac)

12V SB:
Max: 3.5A

AC Input:
2000W: 230-240Vdc / 50-60Hz (for China only)

Output Type:
Backplanes (gold finger)

LAN:
1 RJ45 1 GbE Dedicated IPMI LAN port(s)

USB:
2 USB 3.0 port(s) (rear)
2 USB 3.0 port(s) (front)

Video:
1 VGA port(s)

AMD EPYC™ 9004 series processor family
Single processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 320W
Supports CPU 360W at ambient 30°C
Supports CPU 400W at ambient 20°C

Socket
1 x LGA 6096
Socket SP5

LAN
1x 1Gb/s LAN port (1x Intel® I210-AT)
Supported NCSI function
1x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

Rear Side:
2 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Riser Card CRS201M:
1x PCIex16 slot (Gen5x16), FHFL

Riser Card CRS201H:
1x PCIex16 slot (Gen5x16), FHFL

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4
Supports 2280/22110 cards

Dual 1600W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-120V~/ 12A, 50-60Hz
200-240V~/ 10A, 50-60Hz

DC Input:
240Vdc/ 10A

DC Output:
Max 1000W/ 100-120V~
+12V/ 81.5A
+12Vsb/ 2.5A
Max 1600W/ 200-240V~ or 240Vdc Input
+12V/ 133A
+12Vsb/ 2.5A

NOTE: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP2022NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

Storage Controller :
CPU Integrated
Optional kits:
ASUS PIKE II 3008 8-port SAS 12Gb/s HBA card
ASUS PIKE II 3108 8-port SAS HW 12Gb/s RAID card
Broadcom MegaRAID 9540-8i
Broadcom MegaRAID 9560-16i

Networking
2x GbE LAN ports (Intel I350 Controller)
1x Management Port

Rear:
4 x PCIe x16 slots (Gen5 x16 link, FH, FL) for dual-slot GPU cards or
8 x PCIe x16 slots (Gen5 x8 link, FH,FL) for single-slot GPU cards

 

1 x PCIe x16 slots (Gen5 x16 link, FH, HL)
1 x PCIe x16 slot (Gen5 x16/x8 link, FH, HL) or OCP socket option or M.2 riser module
1 x PCIe x8 slot (Gen5 x0/x8 link, LP, HL)

 

Front: 1 x PCIe x8 slot (Gen5 x8 link, LP, HL) Only for SKU1

Front I/O Ports
1x Q-code/port-80 LED
4x USB 3.2 Gen1 ports

Rear I/O Ports
2x USB 3.2 Gen1 ports
2x Gigabit LAN ports 
1x MAnagement port 
1x VGA port

Switch/LED
Front :
1x Power Button/LED
1x Location Button/LED
1x Message LED
1x Q-Code/Port 80 LED
2x LAN LED
Rear :
1x Power Button/LED
1x Location LED
1x Message LED

5th Generation Intel® Xeon® Scalable Processors
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series
Single processor, TDP up to 350W

Socket
1 x LGA 4677
Socket E

16 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported

5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

Note: 5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup. 

LAN
Rear side:
1 x 1Gb/s LAN port (1 x Intel® I210-AT)
Supports NCSI function

1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

Front side:
12 x 3.5"/2.5" SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Riser Card CRS201C:
1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

Riser Card CRS201D:
1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

Riser Card CRS2018:
1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth, from CPU
Support NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4, from PCH
Supports 2280/22110 cards

Dual 2400W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-127V~/ 12.5A, 47-63Hz
180-240V~/ 14.5A, 47-63Hz

DC Input:
240Vdc/ 12A

DC Output:
Max 1000W/ 100-127V~
+ 12V/ 84A
+ 12Vsb/ 3A
Max 2200W/ 180-200V~
+ 12V/ 180A
+ 12Vsb/ 3.5A
Max 2400W/ 200-240V~ or 240Vdc
+ 12V/ 197A
+ 12Vsb/ 3.5A

NOTE:

1. The system power supply requires C19 power cord

2. The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1 x M.2 slot
1 x TPM header
1 x VROC connector
2 x OCP 3.0 mezzanine slots

Front I/O
2 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
1 x LAN activity LED
1 x HDD activity LED
1 x System status LED

Rear I/O
2 x USB 3.2 Gen1
1 x Mini-DP
1 x RJ45
1 x MLAN
1 x ID button with LED

Backplane I/O
Speed and bandwidth:
PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s

5th Generation Intel® Xeon® Scalable Processors
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series
Single processor, TDP up to 350W

Socket
1 x LGA 4677
Socket E

16 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported

 

5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

 

Note: 5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup

LAN
Rear side:
1 x 1Gb/s LAN port (1 x Intel® I210-AT)
Supports NCSI function

1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

Front side:
12 x 3.5"/2.5" SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Riser Card CRS201C:
1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

Riser Card CRS201D:
1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

Riser Card CRS2018:
1x PCIex16 (Gen5x16) FHFL slot, from CPU, for GPUs

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth, from CPU
Support NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4, from PCH
Supports 2280/22110 cards

Dual 2700W (240V) 80 PLUS Titanium redundant power supply

AC Input:
100-127V~/ 12A, 50-60Hz
200-240V~/ 16A, 50-60Hz

DC Input:
240Vdc/ 16A

DC Output:
Max 1008W/ 100-127V~
+ 12V/ 84A
+ 12Vsb/ 3A
Max 2700W/ 200-240V~
+ 12V/ 225A
+ 12Vsb/ 3A

NOTE:

1. The system power supply requires C19 power cord

2. The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
1x VROC connector
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

AMD EPYC™ 9004 series processor family
Single processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 360W
Supports CPU 400W at ambient 30°C

Socket
1x LGA 6096
Socket SP5

LAN
1x 1Gb/s LAN port (1x Intel® I210-AT)
Supported NCSI function
1x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM 

Riser Card CRS201M:
1x PCIex16 (Gen5x16) FHHL slot

Riser Card CRS201H:
1x PCIex16 (Gen5x16) FHHL slot

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4
Supports 2280/22110 cards

Dual 1300W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-240V~/ 12-7A, 50-60Hz
200-240V~/ 8A, 50-60Hz

DC Input:
240Vdc/ 6.5A

DC Output:
Max 1000W/ 100-240V~
+ 12V/ 80.5A
+ 12Vsb/ 3A
Max 1300W/ 200-240V~ or 240Vdc Input
+ 12V/ 105.4A
+ 12Vsb/ 3A

NOTE: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP20C5NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

AMD EPYC™ 9004 series processor family
Single processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 360W
Supports CPU 400W at ambient 30°C

Socket
1 x LGA 6096
Socket SP5

LAN
1x 1Gb/s LAN port (1x Intel® I210-AT)
Supported NCSI function
1x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

Riser Card CRS201M:
1x PCIex16 (Gen5x16) FHHL slot
2x PCIex16 (Gen4x8) FHHL slots

Riser Card CRS201H:
1x PCIex16 (Gen5x16) FHHL slot
1x PCIex16 (Gen4x16) FHHL slot

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4
Supports 2280/22110 cards

Dual 1300W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-240V~/ 12-7A, 50-60Hz
200-240V~/ 8A, 50-60Hz

DC Input:
240Vdc/ 6.5A

DC Output:
Max 1000W/ 100-240V~
+ 12V/ 80.5A
+ 12Vsb/ 3A
Max 1300W/ 200-240V~ or 240Vdc Input
+ 12V/ 105.4A
+ 12Vsb/ 3A

NOTE: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP20C5NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

AMD EPYC™ 9004 series processor family
Single processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 360W
Supports CPU 400W at ambient 30°C

Socket
1 x LGA 6096
Socket SP5

LAN
1x 1Gb/s LAN port (1x Intel® I210-AT)
Supported NCSI function
1x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

Riser Card CRS201M:
1x PCIex16 (Gen5x16) FHHL slot
2x PCIex16 (Gen4x8) FHHL slots

Riser Card CRS201H:
1x PCIex16 (Gen5x16) FHHL slot
1x PCIex16 (Gen4x16) FHHL slot

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4
Supports 2280/22110 cards

Dual 1300W (240V) 80 PLUS Titanium redundant power supply

AC Input:
100-127V~/ 12A, 50-60Hz
200-240V~/ 8A, 50-60Hz

DC Input:
240Vdc/ 7A

DC Output:
Max 1000W/ 100-127V~
+ 12.2V/ 82A
+ 12Vsb/ 3A
Max 1300W/ 200-240V~ or 240Vdc Input
+ 12.2V/ 106A
+ 12Vsb/ 3A

NOTE: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP20C5NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

AMD EPYC™ 9004 series processor family
Single processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 360W
Supports CPU 400W at ambient 30°C

Socket
1 x LGA 6096
Socket SP5

LAN
1 x 1Gb/s LAN port (1 x Intel® I210-AT)
Supported NCSI function
1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

8x 2.5" Gen4 NVMe hot-swappable bays
16x 2.5" SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Riser Card CRS201M:
1x PCIex16 slot (Gen5x16), FHHL
1x PCIex16 slot (Gen4x8), FHHL

Riser Card CRS201H:
1x PCIex16 slot (Gen5x16), FHHL
1x PCIex16 slot (Gen4x8), FHHL

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4
Supports 2280/22110 cards

Dual 1300W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-240V~/ 12-7A, 50-60Hz
200-240V~/ 8A, 50-60Hz

DC Input:
240Vdc/ 6.5A

DC Output:
Max 1000W/ 100-240V~
+ 12V/ 80.5A
+ 12Vsb/ 3A
Max 1300W/ 200-240V~ or 240Vdc Input
+ 12V/ 105.4A
+ 12Vsb/ 3A

NOTE: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP20O7NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

CPU
AMD EPYC™ 9004 series processor family
Single processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 360W

Supports CPU 400W at ambient 30°C

Socket
1 x LGA 6096
Socket SP5

LAN
1 x 1Gb/s LAN port (1 x Intel® I210-AT)
Supported NCSI function
1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

12 x 2.5" Gen4 NVMe hot-swappable bays
12 x 2.5" SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Riser Card CRS201M:
1x PCIex16 (Gen5x16) FHHL slot

Riser Card CRS201H:
1x PCIex16 (Gen5x16) FHHL slot

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4
Supports 2280/22110 cards

Dual 1600W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-120V~/ 12A, 50-60Hz
200-240V~/ 10A, 50-60Hz

DC Input:
240Vdc/ 10A

DC Output:
Max 1000W/ 100-120V~
+ 12V/ 81.5A
+ 12Vsb/ 2.5A
Max 1600W/ 200-240V~ or 240Vdc Input
+ 12V/ 133A
+ 12Vsb/ 2.5A

NOTE: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP20O7NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

AMD EPYC™ 9004 series processor family
Single processor, 5nm technology
Up to 96-core, 192 threads per processor
cTDP up to 320W
Supports CPU 360W at ambient 30°C
Supports CPU 400W at ambient 20°C

Socket
1 x LGA 6096
Socket SP5

LAN
1x 1Gb/s LAN port (1x Intel® I210-AT)
Supported NCSI function
1x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

Riser Card CRS201M:
1x PCIex16 slot (Gen5x16), FHFL

Riser Card CRS201H:
1x PCIex16 slot (Gen5x16), FHFL

Riser Card CRS2018:
1x PCIex16 slot (Gen4x16), FHHL

2x OCP 3.0 slots with PCIe Gen5x16 bandwidth
Supported NCSI function

1x M.2 slot:
M-key
PCIe Gen3x4
Supports 2280/22110 cards

Dual 2400W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-127V~/ 12.5A, 47-63Hz
180-240V~/ 14.5A, 47-63Hz

DC Input:
240Vdc/ 12A

DC Output:
Max 1000W/ 100-127V~
+ 12V/ 84A
+ 12Vsb/ 3A
Max 2200W/ 180-200V~
+ 12V/ 180A
+ 12Vsb/ 3.5A
Max 2400W/ 200-240V~ or 240Vdc
+ 12V/ 197A
+ 12Vsb/ 3.5A

NOTE:
The system power supply requires C19 type power cord

The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Internal I/O
1x M.2 slot
1x TPM header
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
1x LAN activity LED
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
1x RJ45
1x MLAN
1x ID button with LED

Backplane I/O
Backplane P/N: 9CBP20C5NR-00
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s