1024US-TRT

Please Inquire

SKU	1024US-TRT

Processor

CPU:
Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
Socket SP3
Supports CPU TDP up to 280W
Cores:
Up to 64 Cores
Chipset:
System on Chip (SoC)
Note:
Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

Memory

Memory Capacity:
32 DIMM slots
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus
Memory Type:
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes:
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage:
1.2V
Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

Chassis

1U Rackmount Chassis

Dimensions

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
29" (737mm)

Front Panel

Buttons：
Power On/Off button
System Reset button
LEDs：
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Bios	BIOS Type: AMI 128Mb SPI Flash EEPROM BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

Onboard Devices

VGA:
ASPEED AST2500 BMC

HDD Drive Bays

Hot-swap:
4 Hot-swap 3.5" SATA3 drive bays

HDD Backplane:
Supports 4 SATA3 or 4 NVMe or 4 SAS3 HDD

Expansion Slots

2 PCI-E 4.0 x16 (FH/HL 9.5") slots
1 PCI-E 4.0 x16 (LP) slot
1 PCI-E 4.0 x16 (internal proprietary LP slot)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Power Supply

1000W Redundant Power Supplies with PMBus
Total Output Power:
800W/1000W
Dimension (W x H x L):
73.5 x 40 x 203 mm
Input:
100-127Vac / 9.8 - 7A / 50-60Hz
200-240Vac / 7 - 5A / 50-60Hz
200-240Vdc / 7 - 5A (for CCC only)
+12V:
Max: 66.7A / Min: 0A (100-127Vac)
Max: 83A / Min: 0A (200-240Vac)
Max: 83A / Min: 0A (200-240Vdc)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

SATA:
4 SATA3 (6 Gbps) ports
LAN:
Dual 10GBase-T LAN ports via Intel® X710-AT2
1 RJ45 Dedicated IPMI LAN port
USB:
3 USB 3.0 ports (2 rear + 1 Type A)
VGA:
1 VGA port
SAS:
4 SAS3 ports support via optional SAS kit
NVMe:
4 NVMe support via optional drive tray
Others:
1 COM port (rear)
2 SATA DOM power connector
TPM 1.2 header

Cooling

Fans:
8 heavy-duty PWM fans with optimal fan speed control
Air Shroud:
2 Air Shroud

Operating Environment

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Note:
Support for operating 35°C is available in certain system configurations. Contact your our sales rep or Technical Support for more details.

Details

CPU:
Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
CPU switching voltage regulator
FAN:
Up to 8-fan status tachometer monitoring
Up to eight 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I²C Temperature Sensing Logic
LED:
CPU / System Overheat LED
Other Features:
Chassis Intrusion Detection
Chassis Intrusion Header

1029P-N32R

Please Inquire

CONFIGURE

SKU	SYS-1029P-N32R

Processor

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
3 UPI up to 10.4GT/s
Support CPU TDP up to 140W

Cores:
Up to 22 Cores

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM
Supports Intel® Optane™ DCPMM

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

Chassis

1U Rackmount Chassis

Dimensions

Height:
1.7" (43mm)

Width:
17.26" (438mm)

Depth:
35.95" (913mm)

Front Panel

Buttons:
Power On/Off button
UID button

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

Bios	BIOS Type: AMI 32Mb SPI Flash ROM

Onboard Devices

Chipset:
Intel® C627 chipset

Network Connectivity:
Intel® X550 Dual Port 10GBase-T

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Graphics:
ASPEED AST2500 BMC

HDD Drive Bays

Hot-swap:
Dual Drawer/Tray with a total of 32 NVMe 2.5" SSDs

Expansion Slots

PCI-Express:
2 PCI-E 3.0 x16 Low-profile slots

M.2:
M.2 Interface: 2 PCI-E 3.0 x2, RAID 0, 1
M.2 Form Factor: 2260/2280/22110
M.2 Key: M-Key

Power Supply

1000 / 1600W 1U Redundant Power Supply

Total Output Power:
1000W / 1600W

Dimension (W x H x L):
73.5 x 40 x 185 mm

Input:
100 -- 127Vac / 13.8A / 47-63Hz
200 -- 240Vac / 9.6A / 47-63Hz
200 -- 240Vdc / 8.5A (CCC Only)

+12V:
Max: 83A / Min: 0A (1000W)
Max: 132A / Min: 0A (1600W)

12Vsb:
Max: 2.1A / Min: 0A

Output Type:
Gold Finger

Certification:
Platinum Level Certified

Input Output

LAN:

2 RJ45 10GBase-T ports

1 RJ45 Dedicated IPMI LAN port

USB:

2 USB 3.0 ports (rear)

Video:

1 VGA port

Serial Header

1 COM port (header)

Cooling

8x 40x56mm PWM fans

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C ~ 30°C (50°F ~ 86°F)
Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

Details

Software:
Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor® 5
Watch Dog

Power Configurations:
ACPI / APM Power Management

1124US-TNRP

Please Inquire

CONFIGURE

SKU	AS-1124US-TNRP

Processor

CPU：
Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
Socket SP3
Supports CPU TDP up to 280W

Cores：
Up to 64 Cores

Note：
Certain CPUs with high TDP may be supported only under specific conditions. Please contact Technical Support for additional information about specialized system optimization

Memory

Memory Capacity：
32 DIMM slots
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus

Memory Type：
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs

DIMM Sizes：
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB

Memory Voltage：
1.2V

Error Detection：
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

Chassis

1U Rackmount Chassis

Dimensions

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
29.1" (739mm)

Front Panel

Buttons:
Power On/Off button
System UID button
LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
UID LED

Bios	BIOS Type: AMI 128Mb SPI Flash EEPROM

Onboard Devices

Chipset:
System on Chip (SoC)

SATA:
SATA3 (6Gbps)

Network Connectivity:
Networking options provided via Ultra Riser card

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Graphics:
ASPEED AST2500 BMC

HDD Drive Bays

Hot-swap:
12 Hot-swap 2.5" U.2 NVMe drive bays

HDD Backplane:
Supports 12 NVMe or 12 SAS3 HDD or 12 SATA3

Expansion Slots

2x PCI-E 4.0 x16 (FH/HL, 9.5"L)
1x PCI-E 4.0 x16 (LP)
1x PCI-E 4.0 x16 (internal proprietary LP slot)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Power Supply

1200W Redundant Power Supplies with PMBus
Total Output Power:
800W: 100 – 127Vac
1200W: 200 – 240Vac
1200W: 200 -240Vdc (for CCC only)
Dimension (W x H x L):
73.5 x 40 x 203 mm
Input:
100-127Vac / 9.8 - 7A / 50-60Hz
200-240Vac / 7.5 - 6A / 50-60Hz
200-240Vdc / 7.5 - 6A (for CCC only)
+12V:
Max: 66.7A / Min: 0A (100-127Vac)
Max: 100A / Min: 0A (200-240Vac)
Max: 100A / Min: 0A (200-240Vdc)
+12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

NVMe:
12 NVMe ports (default)

LAN:
Dual-port 10GBase-T and Dual-port 10G SFP+ via Intel X710-TM4
1 RJ45 Dedicated IPMI LAN port

USB:
4 USB 3.0 ports
(2 rear + 1 Type A + 1 front)

VGA:
1 VGA port

SAS:
12 SAS3 ports support via optional SAS kit

SATA:
12 SATA3 ports support via optional kits

Others:
1 COM port (rear)
2 SATA DOM power connectors
TPM 2.0 header

Cooling

Fans:
8 Heavy duty fans with optimal fan speed control
Air Shroud:
1 Air Shroud

Operating Environment

RoHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature:
10°C ~ 30°C (50°F ~ 86°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

Details

PC Health Monitoring
CPU:
Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator

FAN:
Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors

Temperature:
Monitoring for CPU and chassis environment
Thermal Control for fan connectors

AS-1125HS-TNR

$6,657.00

CONFIGURE

SKU	AS-1125HS-TNR

Processor

CPU:

Dual Socket SP5

4th Generation AMD EPYC™ 9004 Series Processor

Support CPU TDP up to 360W

Cores:

Up to 192C/384T

Note:

Certain CPUs with high TDP may be supported only under specific conditions. Please contact our Technical Support for additional information about specialized system optimization

Memory

Memory:
Memory Capacity: 24 DIMM slots
Up to 6TB: 3DS ECC Registered RDIMM, DDR5-4800MHz
Memory Type: 4800MHz ECC DDR5 RDIMM Up to 512GB of memory
Note:
For optimal performance AMD recommends full memory population
Memory Voltage:
1.1 V
Error Detection:
Corrects single-bit errors Detects double-bit errors (using ECC memory)

Chassis

1U Rackmount Chassis

Dimensions

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
29.4" (747mm)

Front Panel

Buttons:
Power On/Off
UID button
LEDs:
HDD activity
LAN1 activity
Power status
System information

Bios	BIOS Type: AMI 256MB SPI Flash BIOS Features: ACPI 6.4 Plug and Play (PnP) SMBIOS 3.5 or later UEFI 2.8 USB Keyboard support

Onboard Devices

Chipset:
System on Chip
Network Connectivity:
Via AIOM
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

HDD Drive Bays

Hot-swap:
8x 2.5" hot-swap NVMe/SATA/SAS drive bays (Up to 12x 2.5" hot-swap NVMe/SATA/SAS support with additional parts)
M.2:
2x NVMe (PCIe 3.0 x4, Boot drive only)
M-Key, 2280/22110

Expansion Slots

1 PCIe 5.0 x16 FH, 6.6"L slot(s)
2 PCIe 5.0 x16 FH, 10.5"L slot(s)

Power Supply

1U 800W/1200W Redundant Titanium CRPS w/PMBus power supply
Dimension(W x H x L):
73.5 x 40 x 265 mm
AC Input:
800W: 100-127Vac / 9.8A-7A / 50-60Hz
1200W: 200-240Vac / 7.5A-6A / 50-60Hz
+12V:
Max: 83A / Min: 0A (100Vac-127Vac)
Max: 100A / Min: 0A (200Vac-240Vac)
12V SB:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

Input Output

LAN:
1 Dedicated IPMI LAN port
USB:
3 USB 3.0 port(s) (1 front; 2 rear)
Video:
1 VGA port(s)

Cooling

Fans:
8x 4cm heavy duty fans with optimal fan speed control
Air Shroud:
2x Air Shroud(s)

Operating Environment

Environmental Spec.:
Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Note:
Operating Temperature based on configurations

ASG-1115S-NE316R

Please Inquire

CONFIGURE

SKU	ASG-1115S-NE316R

Processor

CPU:
Single Socket SP5
AMD EPYC™ 9004 Series Processors

Core Count:
Up to 96C/192T

Note:
Supports 200W - 300W TDP CPUs (Air Cooled)

Memory

Memory:
Slot Count: 24 DIMM slots
Max Memory (2DPC): Up to 6TB 4800MT/s ECC DDR5 RDIMM/LRDIMM

Memory Voltage:
1.1V

Chassis

1U Rackmount Chassis

Dimensions

Height:
1.7" (43.6 mm)
Width:
17.2" (438.4 mm)
Depth:
30.4" (773.25 mm)

Front Panel

LED:
Network activity
Power status
SSD activity
System information (overheat/UID)

Buttons:
Power On/Off

Bios	BIOS Type: AMI 32MB SPI Flash EEPROM

Onboard Devices

Chipset:
AMD System on Chip

Network Connectivity:
Via AIOM

NVMe

HDD Drive Bays

Drive Bays Configuration:
Default: Total 16 bay(s)
16 front hot-swap E3.S 1T NVMe drive bay(s)

M.2:
2 M.2 NVMe slot(s) (M-key 2280/22110)

Expansion Slots

PCI-Express (PCIe) Configuration:
Default
2 PCIe 5.0 x16 FHHL slot(s)
2 PCIe 5.0 x16 AIOM slot(s) (OCP 3.0 compatible)

M.2:
2 M.2 PCIe 3.0 x2 NVMe slot(s) (M-key 2280/22110)

Power Supply

1x 1600W Redundant Titanium Level power supply
Dimension (WxHxL):
73.5 x 40 x 203 mm

+12V:
Max: 133A / Min: 0A (200Vac-240Vac)

12V SB:
Max: 2.1A / Min: 0A

AC Input:
1600W: 200-240Vac / 50-60Hz

Output Type:
Backplanes (gold finger)

Input Output

LAN:
1 RJ45 1 GbE Dedicated IPMI LAN port(s)

USB:
2 USB 3.0 port(s) (rear)
2 USB 3.0 port(s) (front)

Video:
1 VGA port(s)

Cooling

8 Heavy Duty 4cm Fan(s)

Operating Environment

ROHS:
RoHS Compliant

Environmental Spec.:
Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 8% to 90% (Non-condensing)
Non-operating Relative Humidity: 8% to 95% (Non-condensing)

CB121-VL

$2,871.00

CONFIGURE

SKU

CB121-VL

Processor

Dual 2nd Generation Intel® Xeon® Scalable Processor product family (Cascade Lake Refresh/Cascade Lake/Skylake)
Support CPU TDP up to 165W

QPI Speeds:
10.4 GT/s, 9.6 GT/s

Socket Type:
Socket P0 (LGA-3647 Socket)

Memory

6x memory channels per CPU 2 channels with 2DPC + 4 channels with 1DPC
16x DIMM slots support: DDR4 2933/2666/2400MHz RDIMM/LRDIMM
Intel® Optane™ DC Persistent Memory (Apache Pass) support

Chassis

1U Chassis

Dimensions

438mm x 650mm x 44.4mm
17.2" x 26.5" x 1.75"

Front Panel

System power on/off
System ID
System reset
USB 2.0 Type A connector

Bios	BIOS Type : Insyde UEFI BIOS BIOS Features : ACPI PXE WOL AC loss recovery IPMI 2.0 KCS interface SMBIOS Serial console redirection BIOS Boot Specification BIOS Recovery Mode SRIOV iSCSI TPM

Onboard Devices

SATA :
Intel® Lewisburg PCH on-chip solution
2x SATA 6.0 Gb/s (by 2 x SATA 7 pin)
8x SATA 6.0 Gb/s by edge slot for extension
RAID 0,1,5,10 support by Intel® RSTe

Network Controllers :
Via OCP Mezzanine card/PCIe slots extension
Realtek RTL8211E GbE Ethernet for BMC dedicated management port

Graphics :
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
PCIe VGA/2D Controller
1920x1200@60Hz 32bpp

HDD Drive Bays

External:
2x 2.5" hot-swap
Internal:
2x M.2(NGFF)/M-Key/2280

Expansion Slots

1x OCP
1x FHFL, PCIe X16
1x FHHL, PCIe X16

Power Supply

AC 750W 1+1 redundant high-efficiency power supply 80+
90~264VAC, 47~63 Hz

Input Output

Rear I/O
LAN:
1x RJ45 dedicated to BMC management

USB:
2x USB 3.0

VGA:
1x external DB-15 VGA port

Serial Port:
1x external COM port by 3.5mm phone jack

Cooling

5x 40x56mm easy swap fans

Operating Environment

Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
Storage operating humidity: 5%~95% non-condensing

GC68AB7136

Please Inquire

CONFIGURE

SKU	B7136G68AV4E8HR

Processor

Q'ty / Socket Type:
2x LGA4677

Supported CPU Series:
4th Gen. Intel Xeon Scalable Processors / 5th Gen. Intel Xeon Scalable Processors

Thermal Design Power Wattage:
Max up to 270W (TDP)

Memory

Supported DIMM Qty:
(8)+(8) DIMM slots

DIMM Type / Speed:
RDIMM / RDIMM-3DS DDR5 4800 MHz (1DPC) / 4400MHz (2DPC) - 4th Gen. / RDIMM / RDIMM-3DS DDR5 5600 MHz (1DPC) / 4400MHz (2DPC) - 5th Gen.

Capacity:
Up to 2,048GB RDIMM/3DS RDIMM DDR5 5600/4800/4400 *Follow latest Intel DDR5 Memory POR

Memory channel:
8 Channels per CPU

Memory voltage:
1.1V

Chassis

1U Rackmount Chassis

Dimensions

D x W x H:
26.77" x 17.26" x 1.69" (680 x 438.5 x 43mm)

Front Panel

Buttons:
(1) ID / (1) PWR w/ LED

LEDs:
(1) ID / (1) PWR

I/O Ports:
(1) USB 3.2 Gen.1 port

Bios	Brand / ROM size: AMI / 64MB Feature: Hardware Monitor / FAN speed control automatic / Boot from USB device/PXE via LAN/Storage / Console Redirection / SMBIOS 3.3/PnP/Wake on LAN / ACPI 6.0 / ACPI sleeping states S0, S5

Onboard Devices

LAN
Q'ty / Port:
(1) GbE dedicated for IPMI
PHY:
Realtek RTL8211F

Storage SATA
Connector:
(4) SATA
Controller:
Intel C741
Speed:
6Gb/s
RAID:
RAID 0/1/10/5 (Intel RSTe)

Storage NVMe
Connector (M.2):
(2) 2280 (by PCIe 4.0 interface)
Connector (U.2):
(8) MCIO x4

Graphic
Connector type:
D-Sub 15-pin
Resolution:
Up to 1920x1200
Chipset:
Aspeed AST2600

HDD Drive Bays

Q'ty / Type:
(4) 2.5" Hot-Swap HDD/SSDs / (8) 2.5" Hot-Swap NVMe HDD/SSDs

Front Drive Bay Interface:
(4) SATA 6Gb/s / SAS 12Gb/s / (8) NVMe U.2

Front HDD Backplane Support:
SAS 12Gb/s /SATA 6Gb/s /NVMe

Notification:
The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact technical support if a discrete SAS HBA/RAID adapter is required.

Expansion Slots

PCIe:
(2) PCIe Gen 5 x16 slots

Pre-installed TYAN Riser Card (PCIe Gen.5):
(1) M7136G68-L16-1F riser card for (1) FH/HL PCIe Gen.5 x16 slot (Left) / (1) M7136G68-R16-1F riser card for (1) FH/HL PCIe Gen.5 x16 slot (Right)

Others:
(1) PCIe Gen.5 x16 OCP 3.0 mezzanine slot

Power Supply

Type:
RPSU

Input Range:
AC 100-240V/12-6A

Frequency:
50/60 Hz

Output Watts:
850 Watts

Efficiency:
80 plus Platinum

Redundancy:
1+1

Input Output

USB:
(2) USB3.2 Gen.1 ports (@ rear)

COM:
(1) DB-9 COM port

VGA:
(1) D-Sub 15-pin port

RJ-45:
(1) GbE port dedicated for IPMI

Button:
ID Button

Cooling

(2) 4028 fans / (4) 4056 fans

Operating Environment

Operating Temp.:
10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp.:
- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating Humidity:
90%, non-condensing at 35° C

Details

System Monitoring
Chipset:
Aspeed AST2600
Temperature:
Monitors temperature for CPU & memory & system environment
Voltage:
Monitors voltage for CPU, memory, chipset & power supply
LED:
Over temperature warning indicator / Fan & PSU fail LED indicator / Over voltage warning indicator
Others:
Watchdog timer support

Server Management
Onboard Chipset:
Onboard Aspeed AST2600
AST2600 iKVM Feature:
24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2600 IPMI Feature:
IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface

GC68AB7136-2T

Please Inquire

CONFIGURE

SKU	B7136G68AV4E8HR-2T

Processor

Q'ty / Socket Type:
2x LGA4677

Supported CPU Series:
4th Gen. Intel Xeon Scalable Processors / 5th Gen. Intel Xeon Scalable Processors

Thermal Design Power Wattage:
Max up to 270W (TDP)

Memory

Supported DIMM Qty:
(8)+(8) DIMM slots

DIMM Type / Speed:
RDIMM / RDIMM-3DS DDR5 4800 MHz (1DPC) / 4400MHz (2DPC) - 4th Gen. / RDIMM / RDIMM-3DS DDR5 5600 MHz (1DPC) / 4400MHz (2DPC) - 5th Gen.

Capacity:
Up to 2,048GB RDIMM/3DS RDIMM DDR5 5600/4800/4400 *Follow latest Intel DDR5 Memory POR

Memory channel:
8 Channels per CPU

Memory voltage:
1.1V

Chassis

1U Rackmount Chassis

Dimensions

D x W x H:
26.77" x 17.26" x 1.69" (680 x 438.5 x 43mm)

Front Panel

Buttons:
(1) ID / (1) PWR w/ LED

LEDs:
(1) ID / (1) PWR

I/O Ports:
(1) USB 3.2 Gen.1 port

Bios	Brand / ROM size: AMI / 64MB Feature: Hardware Monitor / FAN speed control automatic / Boot from USB device/PXE via LAN/Storage / Console Redirection / SMBIOS 3.3/PnP/Wake on LAN / ACPI 6.0 / ACPI sleeping states S0, S5

Onboard Devices

LAN
Q'ty / Port:
(2) 10GbE ports + (1) GbE dedicated for IPMI
Controller:
Intel X710-AT2
PHY:
Realtek RTL8211F

Storage SATA
Connector:
(4) SATA
Controller:
Intel C741
Speed:
6Gb/s
RAID:
RAID 0/1/10/5 (Intel RSTe)

Storage NVMe
Connector (M.2):
(2) 2280 (by PCIe 4.0 interface)
Connector (U.2):
(8) MCIO x4

Graphic
Connector type:
D-Sub 15-pin
Resolution:
Up to 1920x1200
Chipset:
Aspeed AST2600

HDD Drive Bays

Q'ty / Type:
(4) 2.5" Hot-Swap HDD/SSDs / (8) 2.5" Hot-Swap NVMe HDD/SSDs

Front Drive Bay Interface:
(4) SATA 6Gb/s / SAS 12Gb/s / (8) NVMe U.2

Front HDD Backplane Support:
SAS 12Gb/s /SATA 6Gb/s /NVMe

Notification:
The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact technical support if a discrete SAS HBA/RAID adapter is required.

Expansion Slots

PCIe:
(2) PCIe Gen 5 x16 slots

Pre-installed TYAN Riser Card (PCIe Gen.5):
(1) M7136G68-L16-1F riser card for (1) FH/HL PCIe Gen.5 x16 slot (Left) / (1) M7136G68-R16-1F riser card for (1) FH/HL PCIe Gen.5 x16 slot (Right)

Others:
(1) PCIe Gen.5 x16 OCP 3.0 mezzanine slot

Power Supply

Type:
RPSU

Input Range:
AC 100-240V/12-6A

Frequency:
50/60 Hz

Output Watts:
850 Watts

Efficiency:
80 plus Platinum

Redundancy:
1+1

Input Output

USB:
(2) USB3.2 Gen.1 ports (@ rear)

COM:
(1) DB-9 COM port

VGA:
(1) D-Sub 15-pin port

RJ-45:
(1) GbE port dedicated for IPMI

Button:
ID Button

Cooling

(2) 4028 fans / (4) 4056 fans

Operating Environment

Operating Temp.:
10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp.:
- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating Humidity:
90%, non-condensing at 35° C

Details

System Monitoring
Chipset:
Aspeed AST2600
Temperature:
Monitors temperature for CPU & memory & system environment
Voltage:
Monitors voltage for CPU, memory, chipset & power supply
LED:
Over temperature warning indicator / Fan & PSU fail LED indicator / Over voltage warning indicator
Others:
Watchdog timer support

Server Management
Onboard Chipset:
Onboard Aspeed AST2600
AST2600 iKVM Feature:
24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2600 IPMI Feature:
IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface

R1520G6

Please Inquire

CONFIGURE

SKU	R1520G6U2XD

Processor

Q'ty / Socket Type:
2 / LGA4710

Supported CPU Series:
Xeon® 6 Processor

Thermal Design Power Wattage:
Max up to 350W* (TDP)

Memory

Supported DIMM Qty:
(16)+(16) DIMM slots

DIMM Type / Speed:
RDIMM / RDIMM-3DS DDR5 6400 MHz (1DPC) / 5200MHz (2DPC) -SRF-SP / RDIMM / RDIMM-3DS DDR5 6400 MHz (1DPC) / 5200MHz (2DPC) / MRDIMM 8000 (1DPC) -P Core only

Capacity:
Up to 8192GB RDIMM *Follow latest Intel DDR5 Memory POR

Memory channel:
8-Channel DDR5 RDIMM / MRDIMM

Memory voltage:
1.1V

Chassis

1U Rackmount Chassis

Dimensions

Dimension (D x W x H):
30.31" x 17.26" x 1.69"
770mm x 438.5mm x 43mm

Front Panel

Buttons:
(1) PWR w/ LED / (1) ID w/ LED / (1) RST / (1) NMI

LEDs:
(1) PWR / (1) ID / (1) Drive / (1) System Event

I/O Ports:
(1) USB 2.0 port / (1) USB 3.0 port

Bios	Brand / ROM size: AMI / 64MB Feature: PXE boot support / Console Redirection / SMBIOS 3.6 / ACPI 6.5 / ACPI sleeping states S0, S5 / UEFI Secure Boot / IPMI Boot / Redfish support / PFR Secure Update / HTTP Boot

Onboard Devices

LAN
Q'ty / Port:
(1) GbE dedicated for IPMI
PHY:
Realtek RTL8211F

Storage NVMe
Connector(M.2):
(2) 22110/2280 (by PCIe Gen 4 interface)
Connector (U.2):
(5) SFF-TA-1016 (MCIO 8x) for (10) front NVMe

Graphic
Connector type:
Mini Display Port
Resolution:
Up to 1920x1200
Chipset:
Aspeed AST2600

HDD Drive Bays

Q'ty / Type:
(10) 2.5" Hot-Swap SSDs

Front Drive Bay Interface:
(10) NVMe U.2

Front Drive Backplane Support:
SAS 24Gb/s /SATA 6Gb/s /NVMe

Notification:
The SAS/SATA HDD backplane is connected to onboard MCIO connection by default. Please contact technical support if a discrete SAS HBA/RAID adapter is required.

Expansion Slots

PCIe:
(1) PCIe Gen 5 x16 slots (HH/HL) / (1) PCIe Gen 5 x16 slots (FH/HL)

Others:
(2) PCIe Gen.5 x16 OCP 3.0 mezzanine slots / (1) DC-SCM 2.0 slot

Power Supply

Type:
RPSU

Input Range:
AC 100-127V/12A / AC 200-240V/8.5A

Frequency:
50/60 Hz

Output Watts:
1,300 Watts

Efficiency:
80 plus Titanium

Redundancy:
1+1

Notification:
We have additional PSU options available, including 2000W, 2700W, and 3200W. For further details, please contact us.

Input Output

Q'ty / Port:
(1) GbE dedicated for IPMI

PHY:
Realtek RTL8211F

Cooling

Fan:
(8) 4056 fans

Operating Environment

Operating Temp.:
10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp.:
- 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating Humidity:
5%~95%, non-condensing

Details

TPM (Optional)
TPM Support:
TM-TPM2-MS-I-9672
Interface:
SPI

System Monitoring
Chipset:
Aspeed AST2600
Temperature:
Monitors temperature for CPU & memory & system environment
Voltage:
Monitors voltage for CPU, memory, chipset & power supply
LED:
Over temperature warning indicator / Fan & PSU fail LED indicator

Server Management
Onboard Chipset:
Onboard Aspeed AST2600 (on DCSCM module)
AST2600 iKVM Feature:
24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2600 IPMI Feature:
IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface

R181-2A0

$2,476.00

CONFIGURE

SKU

R181-2A0

Processor

2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our sales representative

Chassis

1U Rackmount Chassis

Dimensions

438mm(W) x 43.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

10 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Default configuration supports:
10 x SATA drives
or
2 x SATA drives
8 x SAS drives
SAS card is required for SAS devices support
SATA:
1 x 7-pin SATA III 6Gb/s with SATA DOM supported
By using pin_8 or external cable for power function
SAS:
Supported via add-on SAS Card
RAID:
Intel® SATA RAID 0/1/10/5

Expansion Slots

Riser Card CRS1021:
2x PCIe x8 slots (Gen3 x8), Low profile half-length

Riser Card CRS1015:
1x PCIe x16 slot (Gen3 x16), Low profile half-length

2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3

Power Supply

2x 1200W redundant PSUs
80 PLUS Platinum

AC Input:
100-240V~/ 12-7A, 50-60Hz
DC Input:
240Vdc/ 6A

DC Output:
Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A

Input Output

Internal I/O:
2x Power supply connectors
4x SlimSAS connectors
2x SATA 7-pin connectors
2x CPU fan headers
1x USB 3.0 header
1x TPM header
1x VROC connector
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Front I/O:
1x USB 3.0
1x Power button with LED
1x ID button with LED
1x Reset button
1x NMI button
2x LAN activity LEDs
1x HDD activity LED
1x System status LED
Rear I/O:
2x USB 3.0
1x VGA
1x COM (RJ45 type)
2x RJ45
1x MLAN
1x ID button with LED
Backplane I/O:
10x SATA/SAS ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
2x U.2 ports( Reserved)
Bandwidth: PCIe Gen3 x4 per port( Reserved)

Cooling

8x 40x40x56mm (23'000rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R181-340

$2,252.00

CONFIGURE

SKU

R181-340

Processor

2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our sales representative

Chassis

1U Rackmount Chassis

Dimensions

438mm(W) x 43.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

4 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
2.5" HDD/SSD supported
SAS card is required for SAS devices support
1 x 2.5" internal fixed SATA HDD/SSD bay
2 x 2.5" internal fixed SATA HDD/SSD bays as an option
SATA:
1 x 7-pin SATA III 6Gb/s with SATA DOM supported
By using pin_8 or external cable for power function
SAS:
Supported via add-on SAS Card
RAID:
Intel® SATA RAID 0/1/10/5

Optical Drive

1 x Slim type ODD in option

Expansion Slots

Riser Card CRS1021:
2x PCIe x8 slots (Gen3 x8), Low profile half-length

Riser Card CRS1015:
1x PCIe x16 slot (Gen3 x16), Low profile half-length

2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3

Power Supply

2x 1200W redundant PSUs
80 PLUS Platinum

AC Input:
100-240V~/ 12-7A, 50-60Hz
DC Input:
240Vdc/ 6A

DC Output:
Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A

Input Output

Internal I/O:
2x Power supply connectors
4x SlimSAS connectors
2x SATA 7-pin connectors
2x CPU fan headers
1x USB 3.0 header
1x TPM header
1x VROC connector
1x Front panel header
1x HDD back plane board header
1x PMBus connector
1x IPMB connector
1x Clear CMOS jumper
1x BIOS recovery jumper
Front I/O:
2x USB 3.0
1x Power button with LED
1x ID button with LED
1x Reset button
1x NMI button
1x System status LED
1x HDD activity LED
2x LAN activity LEDs
Rear I/O:
2x USB 3.0
1x VGA
1x COM (RJ45 type)
2x RJ45
1x MLAN
1x ID button with LED
Backplane I/O:
4x SATA/SAS ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port

Cooling

8x 40x40x56mm (23'000rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R181-N20

$2,534.00

CONFIGURE

SKU

R181-N20

Processor

2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our sales representative

Chassis

1U Rackmount Chassis

Dimensions

438mm(W) x 43.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

2 x 2.5" U.2 or SATA/SAS hybrid ports, 8 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
SATA:
1 x 7-pin SATA III 6Gb/s with SATA DOM supported
By using pin_8 or external cable for power function
SAS:
Supported via add-on SAS Card
RAID:
Intel® SATA RAID 0/1/10/5
Intel® Virtual RAID On CPU (VROC) RAID 0, 1
Note: VROC module is compatible for Intel®SSD only

Expansion Slots

Riser Card CRS1021:
2x PCIe x8 slots (Gen3 x8), Low profile half-length

Riser Card CRS1015:
1x PCIe x16 slot (Gen3 x16), Low profile half-length

2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3

Power Supply

2x 1200W redundant PSUs
80 PLUS Platinum

AC Input:
100-240V~/ 12-7A, 50-60Hz
DC Input:
240Vdc/ 6A

DC Output:
Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A

Input Output

Internal I/O:

2x Power supply connectors

4x SlimSAS connectors

2x SATA 7-pin connectors

2x CPU fan headers

1x USB 3.0 header

1x TPM header

1x VROC connector

1x Front panel header

1x HDD back plane board header

1x PMBus connector

1x IPMB connector

1x Clear CMOS jumper

1x BIOS recovery jumper

Front I/O:

1x USB 3.0

1x Power button with LED

1x ID button with LED

1x Reset button

1x NMI button

2x LAN activity LEDs

1x HDD activity LED

1x System status LED

Rear I/O:

2x USB 3.0

1x VGA

1x COM (RJ45 type)

2x RJ45

1x MLAN

1x ID button with LED

Backplane I/O:

2x U.2 ports

Bandwidth: PCIe Gen3 x4 per port

8 or 10 x SATA/SAS ports

Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port

Cooling

8x 40x40x56mm (23'000rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R181-NA0

$2,660.00

CONFIGURE

SKU

R181-NA0

Processor

2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
CPU TDP up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Memory

24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Supports Intel® Optane™ DC Persistent Memory (DCPMM)
1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

Maximum verified DCPMM configuration:

* Ambient temperature 35°C
* 2nd Generation Intel® Xeon® Scalable processor 205W (Max.)
* DCPMM 256GB x12 pcs

DCPMM installation locations:
DIMM_P0_( A1, B1, C1)
DIMM_P0_( D1, E1, F1)
DIMM_P1_( G1, H1, I1)
DIMM_P1_( J1, K1, L1)

NOTE:
1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
4. To enquire about installing a greater number of DCPMM, please consult with our sales representative

Chassis

1U Rackmount Chassis

Dimensions

438mm(W) x 43.5mm(H) x 730mm(D)

Onboard Devices

LAN:
2x 1Gb/s LAN ports (Intel® I350-AM2)
1x 10/100/1000 management LAN
Video:
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

10 x 2.5" U.2/ SAS/ SATA hot-swappable HDD/SSD bays
SATA:
1 x 7-pin SATA III 6Gb/s with SATA DOM supported
By using pin_8 or external cable for power function
RAID:
Intel® Virtual RAID On CPU (VROC) RAID 0, 1, 5
Note: VROC module is compatible for Intel®SSD only

Expansion Slots

Riser Card CRS1014:
1x PCIe x16 slot (Gen3 x16), Full-height half-length

Riser Card CRS1015:
1x PCIe x16 slot (Gen3 x16), Full-height half-length
Occupied by CNV3124, 4 x U.2 HBA

2x OCP mezzanine slots
PCIe Gen3 x16
Type1, P1, P2, P3, P4, K2, K3
1 x OCP mezzanine slot is Occupied by CNVO124, 4 x U.2 mezzanine card

Power Supply

2x 1200W redundant PSUs
80 PLUS Platinum

AC Input:
100-240V~/ 12-7A, 50-60Hz
DC Input:
240Vdc/ 6A

DC Output:
Max 1000W/ 100-240V~
+12V/ 80.5A
+12Vsb/ 3A
Max 1200W/ 200-240V~ or 240Vdc input
+12V/ 97A
+12Vsb/ 3A

Input Output

Internal I/O:
2 x Power supply connectors
4 x SlimSAS connectors
2 x SATA 7-pin connectors
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
1 x VROC connector
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O:
1 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Rear I/O:
2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane I/O:
10 x U.2 ports
Bandwidth: PCIe Gen3 x4 per port

Cooling

8x 40x40x56mm (23'000rpm) fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

TPM:
1x TPM header with LPC interface
Optional TPM2.0 kit: CTM000

System Management:
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)

R183-S93-AAB1

Please Inquire

CONFIGURE

SKU	R183-S93-AAB1

Processor

5th Generation Intel® Xeon® Scalable Processors
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor
Dual processor, CPU TDP up to 350W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Socket
2 x LGA 4677
Socket E

Memory

32 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported

5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

note: 5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup.

Chassis

1U Rackmount Chassis

Dimensions

438mm x 43.5mm x 815mm

Onboard Devices

LAN
Rear side:
2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
Support NCSI function

1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

Front side:
4 x 3.5"/2.5" SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Expansion Slots

Riser Card CRS101J:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

Riser Card CRS101Q:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
Supports NCSI function

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
Supports NCSI function

Power Supply

Dual 800W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-240V~/ 10-4A, 50-60Hz

DC Input:
240Vdc/ 4.5A

DC Output:
Max 800W
+ 12V/ 66A
+ 12Vsb/ 2.5A

Input Output

Internal I/O
1x TPM header
1x VROC connector
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
2x LAN activity LEDs
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
2x RJ45
1x MLAN
1x ID LED

Backplane I/O
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

Cooling

8 x 40x40x56mm (32,000rpm) System Fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

System Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

R183-S93-AAC1

Please Inquire

CONFIGURE

SKU	R183-S93-AAC1

Processor

5th Generation Intel® Xeon® Scalable Processors
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series
Dual processor, TDP up to 350W

Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

Socket
2 x LGA 4677
Socket E

Memory

32 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported

5th Gen Intel® Xeon®: Up to 5600 MT/s (1DPC), 4400 MT/s (2DPC)
4th Gen Intel® Xeon®: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)
Intel® Xeon® Max Series: Up to 4800 MT/s (1DPC), 4400 MT/s (2DPC)

Note: 5600 MT/s support under 2DPC configuration requires verified memory and BIOS setup.

Chassis

1U Rackmount Chassis

Dimensions

438mm x 43.5mm x 815mm

Onboard Devices

LAN
Rear side:
2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
Support NCSI function

1 x 10/100/1000 management LAN

Video
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

HDD Drive Bays

Front side:
4 x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays, from CPU_0

SAS card is required for SAS devices support

Expansion Slots

Riser Card CRS101J:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_0

Riser Card CRS101Q:
1x PCIex16 (Gen5x16) FHHL slot, from CPU_1

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_0
Supports NCSI function

1x OCP 3.0 slot with PCIe Gen5x16 bandwidth, from CPU_1
Supports NCSI function

Power Supply

Dual 1300W (240V) 80 PLUS Platinum redundant power supply

AC Input:
100-240V~/ 12-7A, 50-60Hz
200-240V~/ 8A, 50-60Hz

DC Input:
240Vdc/ 6.5A

DC Output:
Max 1000W/ 100-240V~
+ 12V/ 80.5A
+ 12Vsb/ 3A
Max 1300W/ 200-240V~ or 240Vdc Input
+ 12V/ 105.4A
+ 12Vsb/ 3A

Input Output

Internal I/O
1x TPM header
1x VROC connector
2x OCP 3.0 mezzanine slots

Front I/O
2x USB 3.2 Gen1
1x Power button with LED
1x ID button with LED
1x NMI button
1x Reset button
2x LAN activity LEDs
1x HDD activity LED
1x System status LED

Rear I/O
2x USB 3.2 Gen1
1x Mini-DP
2x RJ45
1x MLAN
1x ID LED

Backplane I/O
Speed and bandwidth:
PCIe Gen4x4 or SATA 6Gb/s or SAS 12Gb/s

Cooling

8 x 40x40x56mm (32,000rpm) System Fans

Operating Environment

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Details

System Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings

1U - Enterprise Server (Dual CPU)

Category

Manufacturer

Price Range

Keyword