JBOD

Expander Module
Dual hot-swappable SAS3 expander module

General
Number of Controller:
2

PCIe Switch:
Broadcom PEX 89144

Host/Expansion Interface:
4 x PCIe Gen5 x16 per canister
8 x PCIe Gen5 x16 per system
Supports up to 4 DPUs

Drives Supported
Drive Interface:
SFF-8639
Form Factor:
U.2

Administration / Management
Admin/Firmware Upgrade:
BMC with IPMI 2.0 compliance
LED Indicators:
Yes

Hot swap & Redundancy
Disk Drive:
26
Cooling:
7 x 4056 PWM fans per canister
Total 14 fans

Power Supply:
3200W 1+1 hot swap redundant 80+ Titanium

Power Entry:
Dual AC Inlet

Controller:
Dual

Electrical & Environment
Universal A/C Input:
100~240V AC Full Range

Operating Environment:
Temperature 0ºC to 35ºC
Relative humidity 20% to 80%

Non-operating Environment:
Storage temperature : -20° to 60°C
System relative humidity : 10% to 90%

 

Dimensions (W x D x H):
mm:
438 x 750 x 88
inches:
17.2 x 29.5 x 3.5

Dual expanders (Optional)

12Gb & 6Gb SAS if using dual expanders
12Gb & 6Gb SAS/SATA if using single expander

General
Number of Expander: 
Single

Dual(Optional)
Expander Chip: 
LSI SAS4X40
Host/Expansion Interface : 
4 x Mini SAS HD (SFF-8674) per expander module (backward compatible with SFF-8644 SAS12G)

Drives Supported
Drive Interface:
24Gb & 12Gb SAS if using dual expanders
24Gb & 12Gb SAS + 6Gb SAS/SATA if using single expander
Form Factor:
3.5"

Administration / Management
Admin/Firmware Upgrade:
In-band & Serial port interface
IEM port
LED Indicators, Audible Alarm: Yes

Hot swap & Redundancy
Drive Bays: 
12 x hot swap
Cooling: 
2 x 60x56mm hot swap fans
Power Supply:
550W 1+1 hot swap redundant power supply 80+ Platinum 
800W 1+1 hot swap redundant power supply 80+ Titanium(Optional)
Power Entry: 
Dual AC Inlet
Expander Modules: 
Dual expanders (Optional)

Electrical & Environment
Platinum:
100~127V~, 50/60Hz, 7.0A
200~240V~, 50/60Hz, 3.5A
Titanium:
100-127V~,50/60Hz,10A
200-240V~,50/60Hz, 5A
Operating Environment:
Temperature : 0ºC to 35ºC
Relative humidity : 20% to 80%
Non-operating Environment:
Storage temperature : -20° ~ 60°C
System relative humidity : 10% - 90%

Dimensions (W x D x H):
mm: 438 x 385.45 x 88.2
inches: 17.2 x 15.2 x 3.5

Dual expanders (Optional)

12Gb & 6Gb SAS if using dual expanders
12Gb & 6Gb SAS/SATA if using single expander

General
Number of Expander: 
Single
Dual(Optional)
Expander Chip:
LSI SAS4X40
Host/Expansion Interface:
4 x Mini SAS HD (SFF-8674) per expander module (backward compatible with SFF-8644 SAS12G)

Drives Supported
Drive Interface :
24Gb &12Gb SAS if using dual expanders
24Gb & 12Gb SAS + 6Gb SAS/SATA if using single expander
Form Factor: SFF 2.5"

Administration / Management
Admin/Firmware Upgrade:
In-band & Serial port interface
IEM port
LED Indicators, Audible Alarm: 
Yes

Hot swap & Redundancy
Drive Bays: 24 hot swap
Cooling: 
2 x 60x56mm hot swap fans
Power Supply (options):  
800W 1+1 hot swap redundant power supply 80+ Platinum
800W 1+1 hot swap redundant power supply 80+ Titanium(Optional)
Power Entry: Dual AC Inlet
Expander Modules: Dual expanders (Optional)

Electrical & Environment
Universal A/C Input:
100~127V~,50/60Hz, 7.0A
200~240V~,50/60Hz, 3.5A
Operating Environment:
Temperature : 0ºC to 35ºC
Relative humidity: 20% to 80%
Non-operating Environment:
Storage temperature : -20° ~ 60°C
System relative humidity: 10% - 90%

Physical Specification
Dimensions (W x D x H):
mm: 438 x 345 x 87.5
inches: 17.2 x 13.6 x 3.4

General
Number of Expander: Dual
Expander Chip:
LSI SAS4X40
Host/Expansion Interface:
4 x Mini-SAS HD (SFF-8674) per expander module

Drives Supported
Drive Interface :
12Gb & 6Gb SAS/SATA
Form Factor: 3.5"

Administration / Management
Admin/Firmware Upgrade:
In-band & Serial port interface
IEM port
LED Indicators, Audible Alarm: Yes

Hot swap & Redundancy
Drive Bays: 24 hot swap
Cooling: 
4 x 60x56mm easy swap fans
Power Supply (options):  
800W 1+1 hot swap redundant 80+ Platinum/ Titanium
Power Entry: Dual AC Inlet
Expander Modules: Dual expanders (Optional)

Electrical & Environment
Universal A/C Input:
100-127V~, 50/60Hz, 10A
200-240V~, 50/60Hz, 5A
Operating Environment:
Temperature : 0ºC to 35ºC
Relative humidity : 20% to 80%
Non-operating Environment:
Operating altitude condition : 0 ~ 10K ft
Storage temperature : -20° ~ 60°C
System relative humidity : 10% - 90%

Physical Specification
Dimensions (W x D x H):
mm: 438 x 838 x 88
inches: 17.24 x 33 x 3.5
Mounting:
Standard: 36’’ slide rail

Dual expanders (Optional)

12Gb & 6Gb SAS if using dual expanders
12Gb & 6Gb SAS/SATA if using single expander

General
Number of Expander: Single/Dual
Expander Chip: Broadcom SAS35X40
Host/Expansion Interface: 4 x Mini SAS HD (SFF-8644) per expander module

Drives Supported
Drive Interface:
12Gb SAS (Single/Dual) / 6Gb SATA (Single)
Form Factor: 3.5"

Administration / Management
Admin/Firmware Upgrade:
In-band & Serial port interface
IEM port (Optional)
LED Indicators, Audible Alarm: Yes

Hot swap & Redundancy
Drive Bays: 60
Cooling: 6 x 120x38mm hot swap fans
PowerSupply:
800W 1+1 80+ Platinum/Titanium
1200W 1+1 80+ Platinum
1300W 1+1 80+ Titanium
Power Entry : Dual AC inlet
Expander Modules : Dual expanders (Optional)

Electrical & Environment
Universal A/C Input
Platinum/Titanium 800W:
100~127V~, 50/60Hz, 10A
200~240V~, 50/60Hz, 5A
Platinum 1200W:
100~127V,50/60Hz,10A; Total Power 800W
200~240V,50/60Hz,8A; Total Power 1200W
Titanium 1300W:
100-127V~,50/60Hz,12A
200-240V~,50/60Hz, 8.5A
Operating Environment:
Temperature 0ºC to 35ºC
Relative humidity 20% to 80%
Non-operating Environment :
Temperature -20ºC to 60ºC
Relative humidity 10% to 90%

Physical Specification
Dimensions (W x D x H):
mm: 434 x 750 x 176
inches: 17.1 x 29.5 x 6.9
Mounting:
Standard: 37” tool-less rail
Option: Cable Management Kit

General
Number of Expander: 
Single
Dual(Optional)
Expander Chip:
Hub:
SAS4x48
Edge:
SAS35x40 & SAS35x36/SAS4x40 & SAS4x32
Host/Expansion Interface: 4 x Mini SAS HD (SFF-8674) per expander module (backward compatible with SFF-8644 SAS12G)

Drives Supported
Drive Interface :
24Gb & 12Gb SAS if using dual expanders
24Gb & 12Gb SAS + 6Gb SAS/SATA if using single expander
Form Factor: 3.5” / 2.5” (with optional kit)

Administration / Management
Admin/Firmware Upgrade:
In-band
IEM port
LED Indicators, Audible Alarm: 
Yes

Hot swap & Redundancy
Drive Bays: 
78
Cooling: 
8 x 60x56mm hot swap fans
1 x 40x56mm fan per expander module
Power Supply:  
1600W 1+1 hot swap redundant 80+ Platinum/Titanium
Power Entry: 
Dual AC Inlet
Expander Modules: Dual SAS topology (Optional)

Electrical & Environment
AC Input: 
Platinum:
200~240V,50/60Hz,12A (except China/Taiwan)
200-240V,50/60Hz,10A (for China/Taiwan)
Titanium:
100~127V~,50/60Hz,12A (except China/Taiwan)
200-240V~,50/60Hz,10A (for China/Taiwan)

Operating Environment:
Temperature: 0ºC to 35ºC
Relative humidity: 20% to 80%
Non-operating Environment:
Temperature: -20ºC to 60ºC
Relative humidity: 10% to 90%

Physical Specification
Dimensions (W x D x H):
mm:
434 x 810.5 x 176
434 x 974.7 x 176 (with CMA)
inches:
17 x 31.9 x 7
17 x 38.4 x 7 (with CMA)

General
Number of Expander: 
Single
Dual(Optional)
Expander Chip: 
Broadcom SAS35X48
Host/Expansion Interface: 
4 x Mini SAS HD (SFF-8644) per expander module

Drives Supported
Drive Interface :
•12Gb & 6Gb SAS if using dual expanders
•12Gb & 6Gb SAS/SATA if using single expander
Form Factor: 
3.5"

Administration / Management
Admin/Firmware Upgrade:
In-band
IEM port
LED Indicators, Audible Alarm: 
Yes

Hot swap & Redundancy
Drive Bays: 108
Cooling: 
8 x 60x56mm hot swap fans
1 x 40x56mm fan per expander module
Power Supply: 
2000W 1+1 hot swap redundant 80+ Platinum (with C20 power plug)
2000W 1+1 hot swap redundant 80+ Titanium (with C14 power plug)(Optional)
Power Entry: Dual AC Inlet
Expander Modules: 
Dual SAS topology (Optional)

Electrical & Environment
AC Input:
Platinum:
200~240V,50/60Hz,12A (except China/Taiwan)
200-240V,50/60Hz,10A (for China/Taiwan)
Titanium:
100~127V~,50/60Hz,12A (except China/Taiwan)
200-240V~,50/60Hz,10A (for China/Taiwan)
Operating Environment:
Temperature 0ºC to 35ºC
Relative humidity 20% to 80%
Non-operating Environment:
Temperature -20ºC to 60ºC
Relative humidity 10% to 90%

Physical Specification
Dimensions (W x D x H):
mm:
  434 x 1050 x 176
  434 x 1273 x 176 (with CMA)

General
Number of Expander:
Single/Dual

Expander Chip:
Hub: SAS4x48
Edge: SAS35x40 & SAS35x36/SAS4x40 &SAS4x32
XJ1-40782-01~04 Edge 24/30bays fw and mfg file. 
Host/Expansion Interface: 4 x Mini SAS HD (SFF-8674) per expander module (backward compatible with SFF-8644 SAS12G)

Drives Supported
Drive Interface:
24Gb & 12Gb SAS if using dual expanders
24Gb & 12Gb SAS + 6Gb SAS/SATA if using single expander

Form Factor:
3.5"

Administration / Management
Admin/Firmware Upgrade:
In-band
IEM port
LED Indicators, Audible Alarm:
Yes

Hot swap & Redundancy
Drive Bays:
108
Cooling:
8 x 60x56mm hot swap fans
1 x 40x56mm fan per expander module

Power Supply:
2000W 1+1 hot swap redundant 80+ Platinum (with C20 power plug)
2000W 1+1 hot swap redundant 80+ Titanium (with C14 power plug)

Power Entry:
Dual AC Inlet
Expander Modules:
Dual SAS topology (Optional)

Electrical & Environment
AC Input:
Platinum:
200-240V~,50/60Hz,15A
Titanium:
100-127V~,50/60Hz,12A (except China)
200-240V~,50/60Hz,10A

Operating Environment:
• Temperature 0ºC to 35ºC
• Relative humidity 20% to 80%
Non-operating Environment:
• Temperature -20ºC to 60ºC
• Relative humidity 10% to 90%

Dimensions (W x D x H):
mm:
434 x 1050 x 176
434 x 1273 x 176 (with CMA)
inches:
17 x 41 x 7
17 x 50 x 7 (with CMA)