SuperMicro Dual-CPU Server

CPU:
Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
Socket SP3
Supports CPU TDP up to 280W
Cores:
Up to 64 Cores
Chipset:
System on Chip (SoC)
Note:
Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

Memory Capacity:
32 DIMM slots
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
8-channel memory bus
Memory Type:
DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes:
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage:
1.2V
Error Detection:
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
29" (737mm)

Buttons：
Power On/Off button
System Reset button
LEDs：
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 128Mb SPI Flash EEPROM
BIOS Features:
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1

VGA:
ASPEED AST2500 BMC

2 PCI-E 4.0 x16 (FH/HL 9.5") slots
1 PCI-E 4.0 x16 (LP) slot
1 PCI-E 4.0 x16 (internal proprietary LP slot)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

1000W Redundant Power Supplies with PMBus
Total Output Power:
800W/1000W
Dimension (W x H x L):
73.5 x 40 x 203 mm
Input:
100-127Vac / 9.8 - 7A / 50-60Hz
200-240Vac / 7 - 5A / 50-60Hz
200-240Vdc / 7 - 5A (for CCC only)
+12V:
Max: 66.7A / Min: 0A (100-127Vac)
Max: 83A / Min: 0A (200-240Vac)
Max: 83A / Min: 0A (200-240Vdc)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
Titanium Level

SATA:
4 SATA3 (6 Gbps) ports
LAN:
Dual 10GBase-T LAN ports via Intel® X710-AT2
1 RJ45 Dedicated IPMI LAN port
USB:
3 USB 3.0 ports (2 rear + 1 Type A)
VGA:
1 VGA port
SAS:
4 SAS3 ports support via optional SAS kit
NVMe:
4 NVMe support via optional drive tray
Others:
1 COM port (rear)
2 SATA DOM power connector
TPM 1.2 header

Fans:
8 heavy-duty PWM fans with optimal fan speed control
Air Shroud:
2 Air Shroud

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)
Note:
Support for operating 35°C is available in certain system configurations. Contact your our sales rep or Technical Support for more details.

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
3 UPI up to 10.4GT/s
Support CPU TDP up to 165W
Cores:
Up to 28 Cores
Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
GPU Support:
Please refer to: Compatible GPU list

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
Width:
17.2" (437mm)
Depth:
35.2" (894mm)
39.3" (997mm) with rails

Buttons:
Power On/Off button
System Reset button
LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Connectivity:
Intel® X550 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

Hot-swap:
2x Hot-swap 2.5" SAS/SATA/NVMe drive bays

Fixed:
2x Internal 2.5" drive bays

 

4x PCI-E 3.0 x16 slots (FHFL)
1x PCI-E 3.0 x16 (LP) slot
1x PCI-E 3.0 x8 (LP) slot

2000W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1800W/1980W/2000W
Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-120Vac / 12-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb:
Max: 2.1A / Min: 0A
Output Type:
25 Pairs Gold Finger Connector
Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

SATA:
4x SATA3 (6Gbps) ports
LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
USB:
4x USB 3.0 ports (rear)
Video:
1x VGA port
Serial Header:
1x Fast UART 16550 header

9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
35.2" (894mm)
39.3" (997mm) with rails

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Hot-swap:
2 Hot-swap 2.5" SAS/SATA drive bays

Fixed:
2 Internal 2.5" drive bays

 

M.2
Support 1x M.2 2242/2260/2280
Support M.2 SATA and NVMe

4x PCI-E 3.0 x16 slots (FHFL)
1x PCI-E 3.0 x16 (LP) slot
1x PCI-E 3.0 x8 (LP) slot

2000W Redundant Power Supplies with PMBus
Total Output Power:
1000W/1800W/1980W/2000W
 

Dimension (W x H x L):
73.5 x 40 x 265 mm
 

Input:
100-120Vac / 12-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb:
Max: 2.1A / Min: 0A
 

Output Type:
25 Pairs Gold Finger Connector
 

Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

SATA:
4x SATA3 (6Gbps) ports
 

LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
4x USB 3.0 ports (rear)
Video:
1x VGA port
 

Serial Header:
1x Fast UART 16550 header

9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control

RoHS:
RoHS Compliant
Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
3X UPI up to 10.4GT/s
Support CPU TDP up to 165W
 

Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
 

GPU:
4X Nvidia® Tesla® P100 SXM2 GPUs
NVIDIA® NVLINK™ up to 80GB/s

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
35.2" (894mm)
39.3" (997mm) with rails

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps) with RAID 0, 1, 5, 10
 

Network Connectivity:
Intel® X550 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
ASPEED AST2500 BMC

Hot-swap:
2 Hot-swap 2.5" SAS/SATA drive bays
 

Fixed:
2 Internal 2.5" drive bays

 

M.2
Support 1x M.2 2242/2260/2280
Support M.2 SATA and NVMe

4x PCI-E 3.0 x16 slots
1x PCI-E 3.0 x8 (LP) slot

2000W Redundant Power Supplies with PMBus
 

Total Output Power:
1000W/1800W/1980W/2000W
 

Dimension (W x H x L):
73.5 x 40 x 265 mm
Input:
100-120Vac / 12-9.5A / 50-60Hz
200-220Vac / 10-9.5A / 50-60Hz
220-230Vac / 10-9.8A / 50-60Hz
230-240Vac / 10-9.8A / 50-60Hz
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V:
Max: 83.3A / Min: 0A (100-120Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 166.7A / Min: 0A (230-240Vac)
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
 

12Vsb:
Max: 2.1A / Min: 0A
 

Output Type:
25 Pairs Gold Finger Connector
 

Certification:
UL/cUL/CB/BSMI/CE/CCC
  Titanium Level

SATA:
4x SATA3 (6Gbps) ports
 

LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
4x USB 3.0 ports (rear)
 

Video:
1x VGA port
 

Serial Header:
1x Fast UART 16550 header

9x Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
Dual UPI up to 10.4GT/s
Support CPU TDP 70-140W with IVR
 

Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
8 DIMM slots
Up to 2TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro

1U Rackmount Chassis

Width:
17.2" (437mm)
 

Height:
1.7" (43mm)
 

Depth:
19.98" (508mm)

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

256Mb SPI Flash EEPROM with AMI BIOS

8x Hot-swap 2.5" SATA3 drive bays

1x Slim DVD-ROM drive (optional)
PCIe/SATA M.2 drive (optional)

1x PCI-E 3.0 x8 (FHHL) slot

600W High-Efficiency Power Supply w/PMBus 1.2, I2C, PFC, and Digital Switching
 

AC Input:
100-240V, 50-60Hz
 

DC Output:
+3.3V: 15A
+5V: 18A
+5V standby: 3A
+12V: 49A
-12V: 0.5A
 

Certification:
Platinum Level Certified  

SATA:
8x SATA3 (6Gbps) ports
 

LAN:
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
2x USB 2.0 ports (rear)
 

Video:
1x VGA port
 

Serial Port / Header:
1x COM port (header)
 

DOM:
2x SuperDOM (Disk on Module) ports

4x 4cm 22.5K RPM middle cooling fans

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
Support CPU TDP 45-140W with IVR
 

Cores:
Up to 28 Cores with Intel® HT Technology

Memory Capacity:
8 DIMM slots
Up to 1TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666MHz
 

Memory Type:
2666/2400/2133MHz ECC DDR4 SDRAM

1U Rackmount Chassis

Width:
17.2" (437mm)
Height:
1.7" (43mm)
Depth:
19.98" (508mm)

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
256Mb SPI Flash EEPROM with AMI BIOS

8x Hot-swap 2.5" SATA3 drive bays

Slim DVD-ROM drive (optional)
PCIe/SATA M.2 drive (optional)

1x PCI-E 3.0 x8 (FHHL) slot

600W Redundant High-Efficiency Power Supplies, PMBus 1.2
 

AC Input:
100-240V, 50-60Hz
Dimension(W x H x L):
54.5 x 40.25 x 220 mm
 

Output:
  +5V standby: 3A
  +12V: 50A (100Vac-240Vac)
 

Certification:
Platinum Level Certified

SATA:
8x SATA3 (6Gbps) ports
 

LAN:
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
2x USB 2.0 ports (rear)
 

Video:
1x VGA port
Serial Port / Header:
1x COM port (header)
 

DOM:
2x SuperDOM (Disk on Module) ports

4x 4cm 22.5K RPM middle cooling fans

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
3 UPI up to 10.4GT/s
Support CPU TDP up to 140W
 

Cores:
Up to 22 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.26" (438mm)
 

Depth:
35.95" (913mm)

Buttons:
Power On/Off button
UID button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C627 chipset
 

Network Connectivity:
Intel® X550 Dual Port 10GBase-T
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
ASPEED AST2500 BMC

Hot-swap:
Dual Drawer/Tray with a total of 32 NVMe 2.5" SSDs

PCI-Express:
2 PCI-E 3.0 x16 Low-profile slots
 

M.2:
M.2 Interface: 2 PCI-E 3.0 x2, RAID 0, 1
M.2 Form Factor: 2260/2280/22110
M.2 Key: M-Key

1000 / 1600W 1U Redundant Power Supply
 

Total Output Power:
1000W / 1600W
 

Dimension (W x H x L):
73.5 x 40 x 185 mm
 

Input:
100 -- 127Vac / 13.8A / 47-63Hz
200 -- 240Vac / 9.6A / 47-63Hz
200 -- 240Vdc / 8.5A (CCC Only)
 

+12V:
Max: 83A / Min: 0A (1000W)
Max: 132A / Min: 0A (1600W)
 

12Vsb:
Max: 2.1A / Min: 0A
 

Output Type:
Gold Finger
 

Certification:
Platinum Level Certified

8x 40x56mm PWM fans

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature:
   10°C ~ 30°C (50°F ~ 86°F)
Non-operating Temperature:
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
Dual UPI up to 10.4GT/s
Support CPU TDP 70-165W
Cores:
Up to 28 Cores
 

Note:
Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Width:
17.2" (437mm)
 

Height:
1.7" (43mm)
 

Depth:
23.5" (597mm)

Buttons:
Power On/Off button
UID button
 

LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
 

Network Controllers:
Intel® X722 Gigabit Ethernet controller
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Video:
ASPEED AST2500 BMC

8x Hot-swap 2.5" SAS/SATA drive bays

1x Slim DVD-ROM drive bay (optional)

2x PCI-E 3.0 x16 (FHHL) slots
1x PCI-E 3.0 x8 (LP) slot
1x PCI-E 3.0 x16 for Add-on-Module (AOM)
1x PCI-E M.2 SSD slot

600W High-Efficiency Power Supply w/PMBus 1.2, I2C, PFC, and Digital Switching
 

AC Input:
100-240V, 50-60Hz
 

DC Output:
+3.3V: 15A
+5V: 18A
+5V standby: 3A
+12V: 49A
-12V: 0.5A
 

Certification:
Platinum Level

SATA:
8x SATA3 (6 Gbps) ports
 

LAN:
2x RJ45 Gigabit Ethernet ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
4x USB 3.0 ports (rear)
 

Video:
1x VGA port
 

Serial Port / Header:
1x Fast UART 16550 header
 

DOM:
2x SuperDOM (Disk on Module) ports

4x Counter-rotating 4cm PWM fans, 2 fans for cooling AOC

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
Dual UPI up to 10.4GT/s
Support CPU TDP 70-165W
 

Cores:
Up to 28 Cores
 

Note:
Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

1U Rackmount Chassis

Width:
17.2" (437mm)
 

Height:
1.7" (43mm)
 

Depth:
23.5" (597mm)

Buttons:
Power On/Off button
UID button
 

LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
 

Network Controllers:
Intel® X722 Gigabit Ethernet controller
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Video:
ASPEED AST2500 BMC

Hot-swap:
8x Hot-swap 2.5" SAS/SATA drive bays

Peripheral:
1x Slim DVD-ROM drive bay (optional)

2x PCI-E 3.0 x16 (FHHL) slots
1x PCI-E 3.0 x8 (LP) slot
1x PCI-E 3.0 x16 for Add-on-Module (AOM)
1x PCI-E M.2 SSD slot

700W/750W Redundant Power Supplies with PMBus
Total Output Power:
700W/750W
 

Dimension (W x H x L):
54.5 x 40 x 320 mm
Input:
100 - 140Vac / 8 - 6A / 50-60Hz
200 - 240Vac / 4.5 - 3.8A / 50-60Hz
200 - 240Vdc / 4.5 - 3.8A (CCC Only)
 

+12V:
Max: 58A / Min: 0.5A (100 - 140Vac)
Max: 62A / Min: 0.5A (200 - 240Vac)
Max: 62A / Min: 0.5A (200 - 240Vdc)
(CB/CCC Only)
 

+5V sb:
Max: 3A / Min: 0A
 

Output Type:
Gold Finger Connector Mating with Molex 45984-4343
 

Certification:
Platinum Level

SATA:
8x SATA3 (6 Gbps) ports
 

LAN:
2x RJ45 Gigabit Ethernet ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
4x USB 3.0 ports (rear)
 

Video:
1x VGA port
 

Serial Port / Header:
1x Fast UART 16550 header
 

DOM:
2x SuperDOM (Disk on Module) ports

4x Counter-rotating 4cm PWM fans, 2x fans for cooling AOC

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
Dual UPI up to 10.4GT/s
Support CPU TDP 70-165W
Cores:
Up to 28 Cores
 

Note:
Certain high Frequency optimized CPU within 165Ws are not supported, for example, Intel Gold 6144 and 6146 are not supported on the system.
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
12 DIMM slots
Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Width:
17.2" (437mm)
 

Height:
1.7" (43mm)
 

Depth:
23.5" (597mm)

Buttons:
Power On/Off button
UID button
 

LEDs:
Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C622 chipset
 

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
 

Network Controllers:
Intel® X722 10GBase-T Ethernet controller
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Video:
ASPEED AST2500 BMC

8x SATA3 (6Gbps) ports and 2x NVMe/SATA3 hybrid ports (connected to onboard storage controller)

2x PCI-E 3.0 x16 (FHHL) slots
1x PCI-E 3.0 x8 (LP) slot
1x PCI-E 3.0 x16 for Add-on-Module (AOM)
1x PCI-E M.2 SSD slot

700W/750W Redundant Power Supplies with PMBus
Total Output Power:
700W/750W
 

Dimension (W x H x L):
54.5 x 40 x 320 mm
Input:
100 - 140Vac / 8 - 6A / 50-60Hz
200 - 240Vac / 4.5 - 3.8A / 50-60Hz
200 - 240Vdc / 4.5 - 3.8A (CCC Only)
 

+12V:
Max: 58A / Min: 0.5A (100 - 140Vac)
Max: 62A / Min: 0.5A (200 - 240Vac)
Max: 62A / Min: 0.5A (200 - 240Vdc)
(CB/CCC Only)
 

+5V sb:
Max: 3A / Min: 0A
 

Output Type:
Gold Finger Connector Mating with Molex 45984-4343
 

Certification:
Platinum Level

SATA:
8x SATA3 (6 Gbps) ports and 2x NVMe/SATA3 hybrid ports
 

LAN:
2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
6x USB 3.0 ports (4 rear, 2 front via header)
 

Video:
1x VGA port
 

Serial / Header:
1x Fast UART 16550 header
 

DOM:
2x SuperDOM (Disk on Module) ports

4x Counter-rotating 4cm PWM fans, 2 fans for AOC cooling

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
2666 ECC DDR4 NVDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
27.8" (707mm)

 

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

 

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
 

Network Connectivity:
2 25GbE SFP28 ports via AOC-URN4-M2TS-O (Mellanox ConnectX-4 Lx EN)
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
ASPEED AST2500 BMC

10x Hot-swap 2.5" drives supported via expander

2x PCI-E 3.0 x16 (Full-height, 10.5" L)
1x PCI-E 3.0 x8 (Low-profile)
1x PCI-E 3.0 x16 (internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
 

AC Input:
100-127Vac, 50-60Hz
200-240Vac, 50-60Hz
 

+12V:
Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 62.5A & Min: 0A (200Vac-240Vac)
 

12V SB:
Max: 2.1A
Min: 0A
 

Certification:
Platinum Level Certified

SAS:
10x SAS3 ports support via expander and storage Add-on Cards
 

LAN:
2x 25GbE SFP28 ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
5x USB 3.0 ports
(2x rear, 2x front, 1x Type A)
 

Video:
2x VGA ports (1x rear, 1x onboard)
 

Serial Port:
1x Serial header

Fans:
8x heavy duty fans with optimal fan speed control
 

Air Shroud:
1x Air Shroud

 

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

 

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake), Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
 

Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
2666 ECC DDR4 NVDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
27.8" (707mm)

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Connectivity:
4 Gigabit Ethernet LAN ports via AOC-UR-i4G (Intel® i350)
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
ASPEED AST2500 BMC

10x Hot-swap 2.5" drives supported via expander

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
 

AC Input:
100-127Vac, 50-60Hz
200-240Vac, 50-60Hz
 

+12V:
Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 62.5A & Min: 0A (200Vac-240Vac)
 

12V SB:
Max: 2.1A
Min: 0A
 

Certification:
Platinum Level Certified

SAS:
10x SAS3 ports support via expander and storage Add-on Cards
 

LAN:
4x RJ45 GbE LAN ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
5x USB 3.0 ports
(2x rear, 2x front, 1x Type A)
 

Video:
2x VGA ports (1x rear, 1x onboard)
 

Serial Port:
1x Serial header

Fans:
8x heavy duty fans with optimal fan speed control
 

Air Shroud:
1x Air Shroud

 

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

 

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
2666 ECC DDR4 NVDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
27.8" (707mm)

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

10x Hot-swap 2.5" drives supported via expander

2x PCI-E 3.0 x16 (Full-height, 10.5" L)
2x PCI-E 3.0 x8 (1 LP, 1 internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
 

AC Input:
100-127Vac, 50-60Hz
200-240Vac, 50-60Hz
 

+12V:
Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 62.5A & Min: 0A (200Vac-240Vac)
 

12V SB:
Max: 2.1A
Min: 0A
 

Certification:
Platinum Level

Fans:
8x Heavy duty fans with optimal fan speed control
 

Air Shroud:
1x Air Shroud

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   0°C ~ 50°C (32°F ~ 122°F)
Non-operating Temperature: 
   -20°C to 60°C (-4°F to 140°F)
Operating Relative Humidity: 
   10% to 85% (non-condensing)
Non-operating Relative Humidity: 
   10% to 95% (non-condensing)

CPU：
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
 

Cores：
Up to 28 Cores
 

Note：
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
2666 ECC DDR4 NVDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
27.8" (707mm)

 

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

 

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
 

Network Connectivity:
2x 10GBase-T ports via AOC-UR-I2XT (Intel® X540)
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics:
ASPEED AST2500 BMC

10x Hot-swap 2.5" drives supported via expander

2x PCI-E 3.0 x16 (Full-height, 10.5" L)
2x PCI-E 3.0 x8 (1 LP, 1 internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

 

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
 

AC Input:
100-127Vac, 50-60Hz
200-240Vac, 50-60Hz
 

+12V:
Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 62.5A & Min: 0A (200Vac-240Vac)
 

12V SB:
Max: 2.1A
Min: 0A
 

Certification:
Platinum Level Certified

 

SAS:
10x SAS3 ports support via expander and storage Add-on Cards
 

LAN:
2x RJ45 10GBase-T Ethernet ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
5x USB 3.0 ports
(2x rear, 2x front, 1x Type A)
 

Video:
2x VGA ports (1x rear, 1x onboard)
 

Serial Port:
1x Serial header

Fans:
8x heavy duty fans with optimal fan speed control
 

Air Shroud:
1x Air Shroud

 

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)

CPU:
Dual Socket P (LGA 3647)
2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W
Cores:
Up to 28 Cores
 

Note:
BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors

Memory Capacity:
24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM
 

Memory Type:
2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
2666 ECC DDR4 NVDIMM
 

Note:
2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.

1U Rackmount Chassis

Height:
1.7" (43mm)
 

Width:
17.2" (437mm)
 

Depth:
27.8" (707mm)

 

Buttons:
Power On/Off button
System Reset button
 

LEDs:
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED

BIOS Type:
AMI 32Mb SPI Flash ROM

 

Chipset:
Intel® C621 chipset
 

SATA:
SATA3 (6Gbps); RAID 0, 1, 5, 10
 

Network Connectivity:
2x 10G SFP+ ports via AOC-URN2-I2XS (Intel® 82599ES)
 

IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 

Graphics:
ASPEED AST2500 BMC
 

10x Hot-swap 2.5" drives supported via expander

2x PCI-E 3.0 x16 (Full-height, 10.5" L)
2x PCI-E 3.0 x8 (1 LP, 1 internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

 

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
 

AC Input:
100-127Vac, 50-60Hz
200-240Vac, 50-60Hz
 

+12V:
Max: 62.5A & Min: 0A (100Vac-127Vac)
Max: 62.5A & Min: 0A (200Vac-240Vac)
 

12V SB:
Max: 2.1A
Min: 0A
 

Certification:
Platinum Level Certified

SAS:
10x SAS3 ports support via expander and storage Add-on Cards
 

LAN:
2x 10G SFP+ ports
1x RJ45 Dedicated IPMI LAN port
 

USB:
5x USB 3.0 ports
(2x rear, 2x front, 1x Type A)
 

Video:
2x VGA ports (1x rear, 1x onboard)
 

Serial Port:
1x Serial header

Fans:
8x heavy duty fans with optimal fan speed control
Air Shroud:
1x Air Shroud

 

RoHS:
RoHS Compliant
 

Environmental Spec.:
Operating Temperature: 
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature: 
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity: 
   8% to 90% (non-condensing)
Non-operating Relative Humidity: 
   5% to 95% (non-condensing)